Braden Cote

Braden Cote


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2022 in Biomimetics
Verified
Journal Article
Open access
PDF file
BCBraden Cote
Braden Cote
SWSamuel Weston
Samuel Weston
MJMark Jankauski
Mark Jankauski
Small-scale flapping-wing micro air vehicles (FWMAVs) are an emerging robotic technology with many applications in areas including infrastructure monitoring and remote sensing. However, challenges such as inefficient energetics and decreased payload capacity preclude the useful implementation of FWMAVs. Insects serve as inspiration to FWMAV design owing to their energy efficiency, maneuverability, and capacity to hover. Still, the biomechanics of insects remain challenging to model, thereby limiting the translational design insights we can gather from their flight. In particular, it is not well-understood how wing flexibility impacts the energy requirements of flapping flight. In this work, we developed a simple model of an insect drive train consisting of a compliant thorax coupled to a flexible wing flapping with single-degree-of-freedom rotation in a fluid environment. We applied this model to quantify the energy required to actuate a flapping wing system with parameters based off a hawkmoth Manduca sexta. Despite its simplifications, the model predicts thorax displacement, wingtip deflection and peak aerodynamic force in proximity to what has been measured experimentally in flying moths. We found a flapping system with flexible wings requires 20% less energy than a flapping system with rigid wings while maintaining similar aerodynamic performance. Passive wing deformation increases the effective angle of rotation of the flexible wing, thereby reducing the maximum rotation angle at the base of the wing. We investigated the sensitivity of these results to parameter deviations and found that the energetic savings conferred by the flexible wing are robust over a wide range of parameters.

31 December 2024 in Bioinspiration & Biomimetics
Verified
Journal Article
Open access
BCBraden Cote
Braden Cote
CCCailin Casey
Cailin Casey
MJMark Jankauski
Mark Jankauski
Flying insects have a robust flight system that allows them to fly even when their forewings are damaged. The insect must adjust wingbeat kinematics to aerodynamically compensate for the loss of wing area. However, the mechanisms that allow insects with asynchronous flight muscle to adapt to wing damage are not well understood. Here, we investigated the phase and amplitude relationships between thorax deformation and flapping angle in tethered flying bumblebees subject to wing clipping and weighting. We used synchronized laser vibrometry and high-speed videography to measure thorax deformation and flapping angle, respectively. We found that changes in wing inertia did not affect thorax deformation amplitude but did influence wingbeat frequency. Increasing wing inertia increased flapping amplitude and caused a phase lag between thorax deformation and flapping angle, whereas decreasing wing inertia did not affect flapping amplitude and caused the flapping angle to lead thorax deformation. Our findings indicate that bumblebees adapt to wing damage by adjusting their wingbeat frequency rather than altering their wing stroke amplitude. Additionally, our results suggest that bumblebees operate near a wing-hinge-dominated resonant frequency, and that moments generated by steering muscles within the wing hinge influence the phase between thorax deformation and wing stroke nontrivially. These insights can inform the design of resilient, insect-inspired flapping-wing micro air vehicles.

17 September 2025 in Journal of The Royal Society Interface
Verified
Journal Article
Open access
CCCailin B. Casey
Cailin B. Casey
BCBraden Cote
Braden Cote
CHChelsea Heveran
Chelsea Heveran
MJMark Jankauski
Mark Jankauski
Flapping wing insects leverage the dynamics of their compliant flight systems to reduce the energetic costs of flying. However, the extent to which the wing hinge dynamics contribute to the overall system dynamics remains unknown. Therefore, we developed an approach to (i) quantify the passive dynamic properties of the wing hinge and (ii) identify the resonant frequency of the isolated wing/wing hinge system. First, we measured the frequency response relating thorax deformation to wing stroke angle in sacrificed honeybees and army cutworm moths. Using these data, we developed a linear model of the flight system, which we then extended to incorporate nonlinear effects associated with large wing stroke angles. Our findings revealed that both species flap below the linear resonance of the wing hinge. At larger angles, nonlinear aerodynamic damping reduces the resonant frequency, causing both species to flap above wing hinge resonance. We discuss how wing–thorax coupling and muscle dynamics may cause the resonant frequency of the entire flight system to deviate from that of the wing/wing hinge system. Our estimates of wing hinge stiffness and damping provide quantitative parameters that can be incorporated into models of the insect flight system to enable more accurate predictions of resonance behaviour.

24 January 2025 in bioRxiv
Verified
Preprint
Open access
PDF file
CCCailin Casey
Cailin Casey
BCBraden Cote
Braden Cote
CHChelsea M Heveran
Chelsea M Heveran
MJMark Jankauski
Mark Jankauski
Flapping wing insects leverage the dynamics of their compliant flight systems to reduce the energetic costs of flying. However, the extent to which the wing hinge dynamics contribute to the overall system dynamics remains unknown. Therefore, we developed an approach to (1) quantify the passive dynamic properties of the wing hinge, and (2) identify the resonant frequency of the isolated wing/wing hinge system. First, we measured the frequency response relating thorax deformation to wing stroke angle in sacrificed honeybees and army cutworm moths. Using these data, we developed a linear model of the flight system, which we then extended to incorporate nonlinear effects associated with large wing stroke angles. Our findings revealed that both species flap below the linear resonance of the wing hinge. At larger angles, nonlinear aerodynamic damping reduces the resonant frequency, causing both species to flap above wing hinge resonance. We discuss how wing-thorax coupling and muscle dynamics may cause the resonant frequency of the entire flight system to deviate from that of the wing/wing hinge system. Our estimates of wing hinge stiffness and damping provide quantitative parameters that can be incorporated into models of the insect flight system to enable more accurate predictions of resonance behavior.

19 February 2025 in Journal of Computational and Nonlinear Dynamics
Verified
Journal Article
Closed access
PDF file
JRJoseph Reade
Joseph Reade
BCBraden Cote
Braden Cote
MJMark Jankauski
Mark Jankauski
Flapping-wing micro-air vehicles (FWMAVs) are an emerging technology inspired by flying insects that show promise in applications favoring maneuverability and vehicle compactness. However, current designs are limited by inefficient energetics, and current dynamical models of the flight system employ limiting assumptions when considering power demands. Here, we derive a system-level model of the insect flight system including the thorax, wing, and wing hinge that can inform insect-inspired FWMAV design. We applied the model to study the flight system of a hawkmoth, and used a genetic algorithm optimization to tune uncertain model parameters to minimize the power required to hover. Results show that performance is improved by utilizing multimodal excitation to produce favorable flapping kinematics. This is achieved by locating the flapping frequency of the moth between the nonlinear resonant frequencies, resulting in magnified flapping response and aerodynamically advantageous phase. The optimal flapping frequency can be predicted from the system’s underlying linear natural frequencies and is roughly 54% of the system’s mean natural frequency. Furthermore, effective solutions are configured so that the timing of the applied load and thorax responses are matched such that little effort is spent reversing the wing stroke. The optimized model parameters and corresponding kinematics show moderate agreement with those reported for the hawkmoth. To maintain hovering flight, the successful moths in the population expend approximately 58.5 W/kg. The system-level model and the governing principles identified here can inform the design of energy efficient FWMAVs moving forward.

22 June 2026 in bioRxiv
Verified
Preprint
Open access
MAMitchell Alvord
Mitchell Alvord
BCBraden Cote
Braden Cote
SMSarah Morris
Sarah Morris
MJMark Jankauski
Mark Jankauski
Buzz pollination is an important behavior in which bees use vibrations to extract pollen from poricidal anthers. However, the extent to which vibration frequency influences pollen release remains unclear. Here, we quantified pollen expulsion from Solanum sisymbriifolium anthers subjected to harmonic excitation over a broad frequency range encompassing the anther's first natural frequency. We excited anthers to expel pollen and measured anther kinematics and pollen release using high-speed videography. Particle tracking enabled continuous estimation of pollen release throughout each buzzing event, allowing both initial pollen flux and total pollen released to be quantified. Pollen release depended strongly on excitation frequency. Initial pollen flux, total pollen release, and anther kinematics peaked when excitation frequency approached the anther's natural frequency. Anther tip velocity amplitude exhibited the strongest correlation with total pollen release (r = 0.755) and initial pollen flux (r = 0.898). Experimental observations were compared with nonlinear and linear statistical models of pollen release. While both models captured trends in normalized pollen flux, they overpredicted total pollen release, suggesting that adhesive interactions play important roles during extended buzzing events. These findings demonstrate that anther structural dynamics influence pollen release and suggest that vibration amplification may improve the efficiency of buzz pollination.