The use of fossil fuels has contributed to climate change and global warming, which has led to a growing need for renewable and ecologically friendly alternatives to these. It is accepted that renewable energy sources are the ideal option to substitute fossil fuels in the near future. Significant progress has been made to produce renewable energy sources with acceptable prices at a commercial scale, such as solar, wind, and biomass energies. This success has been due to technological advances that can use renewable energy sources effectively at lower prices. More work is needed to maximize the capacity of renewable energy sources with a focus on their dispatchability, where the function of storage is considered crucial. Furthermore, hybrid renewable energy systems are needed with good energy management to balance the various renewable energy sources’ production/consumption/storage. This work covers the progress done in the main renewable energy sources at a commercial scale, including solar, wind, biomass, and hybrid renewable energy sources. Moreover, energy management between the various renewable energy sources and storage systems is discussed. Finally, this work discusses the recent progress in green hydrogen production and fuel cells that could pave the way for commercial usage of renewable energy in a wide range of applications.

The electricity sector has been undergoing profound transformations. In particular, the Portuguese self-consumer regime has allowed customers of the medium and low voltage electricity grid to be producers/consumers of electricity, actively contributing to greater energy efficiency. In this context, the energy that comes from the sun is not used to its maximum. In addition, photovoltaic cells have a characteristic operating curve (voltage vs. current), in which any operating point is reflected. Within this curve, there is a particular point known as the maximum power point (MPP) at which the cell supplies the maximum power output to a load. If the cell does not operate at this point, it has lower efficiency values. To harness maximum power under standard and dynamic shading conditions, there are various techniques of low complexity for capturing maximum power. We present a maximum power point tracking (MPPT) algorithm capable of dealing with the problem of partial shading. This algorithm involves modifying one of the most used algorithms within photovoltaic systems, known as P&O, using a simulated annealing (SA) algorithm. P&O is often used due to its straightforward implementation, but it is susceptible to partial shade conditions. Sampling was added to this algorithm to a better approach to the point of maximum power using the SA, and then to attain a more precise convergence with P&O. Implementing a maximum power point tracking method under partial shading was the major goal of this study.

Recently, water desalination (WD) has been required for the supply of drinking water in a number of countries. Various technologies of WD utilize considerable thermal and/or electrical energies for removing undesirable salts. Desalination systems now rely on renewable energy resources (RERs) such as geothermal, solar, tidal, wind power, etc. The intermittent nature and changeable intensity constrain the wide applications of renewable energy, so the combination of energy storage systems (ESSs) with WD in many locations has been introduced. Thermal energy storage (TES) needs a convenient medium for storing and hence reuses energy. The present work provides a good background on the methods and technologies of WD. Furthermore, the concepts of both thermal and electrical energy storage are presented. In addition, a detailed review of employing ESSs in various WD processes driven by RERs is presented. The integration of energy storage with water desalination systems (WDSs) based on renewable energy has a much better capability, economically and environmentally, compared with conventional desalination systems. The ESSs are required to guarantee a constant supply of fresh water over the day.

In this study, transient modelling for a solar-powered adsorption-based multi-generation system working under the climatic conditions of the Gulf Cooperation Council (GCC) countries is conducted. Three cities are selected for this study: Sharjah in the United Arab Emirates, Riyadh in Saudi Arabia, and Kuwait City in Kuwait. The system comprises (i) evacuated tube solar collectors (ETCs), (ii) photovoltaic-thermal (PVT) solar collectors, and (iii) a single-stage double-bed silica gel/water-based adsorption chiller for cooling purposes. A MATLAB code is developed and implemented to theoretically investigate the performance of the proposed system. The main findings of this study indicate that among the selected cities, based on the proposed systems and the operating conditions, Riyadh has the highest cooling capacity of 10.4 kW, followed by Kuwait City, then Sharjah. As for the coefficient of performance (COP), Kuwait City demonstrates the highest value of 0.47. The electricity generated by the proposed system in Riyadh, Kuwait City, and Sharjah is 31.65, 31.3, and 30.24 kWh/day, respectively. Furthermore, the theoretical results show that at 18:00, the overall efficiency of the proposed system reaches about 0.64 because of the inclusion of a storage tank and its feeding for the adsorption chiller. This study analyzes the feasibility of using a combination of ETCs and PVT collectors to drive the adsorption chiller system and produce electricity in challenging weather conditions.

Adsorption heat storage is the most feasible technology for heating decarbonization, which can store large quantities of waste and renewable heat for an exceptionally long time. However, utilizing adsorption heat storage in geographical locations with sub-zero ambient conditions is challenging. Therefore, this paper experimentally investigates the use of ethanol as a working fluid paired with silica gel for adsorption heat storage and utilizes sub-zero ambient as the heat source. The heat storage characteristics, heat charging/discharging cyclic performance, and energy conversion performance via exergy analysis were determined under realistic operating conditions and benchmarked against the widely investigated silica gel/water. Ethanol adsorbate was successfully utilized as a working fluid to employ the evaporators operating under sub-zero ambient conditions. Silica gel/ethanol showed the most significant net cyclic uptake, twice that of silica gel/water. However, the physical characteristics of ethanol molecules led to a degree of non-desorbed fluid, which hampered such potential to store 18.08 kJ/kg_ads under a sub-zero evaporator temperature and 24.84 kJ/kg_ads for an above-zero evaporator temperature compared to silica gel of 155.12 kJ/kg_ads operating an above-zero evaporator temperature. On the other hand, silica gel/ethanol showed the fastest heat charging/discharging rate that can shorten the cycle time by 45%. The major contributor to exergy destruction was the exergy transferred by charging heat, which was five times the discharging heat due to the high charging temperature.