Rocking core-moment frame (RCMF) combinations are structural assemblies that are capable of collapse prevention, recentering, avoiding soft story failure, and large residual deformation. Although several such systems have been proposed, few studies have quantified RCMFs behavior under lateral loadings. This paper proposes closed-form solutions for the rapid study of RCMFs subjected to three typical lateral load patterns using a continuum method of analysis. An extensive parametric study examines the effects of base fixity, relative frame-to-core stiffness, and type of loading profile. Independent computer analyses verify the validity and accuracy of the proposed formulas. The proposed formulas are applicable to linear-static analysis and preliminary design of low-rise to mid-rise RCMFs with relatively uniform properties over the height.
1 April 2007 in Advances in Structural Engineering
Pounding of adjacent buildings has been a major cause of building damages in the past earthquakes. In this study, two series of shaking table experiments on small scale moment resisting one-bay frames subjected to harmonic excitation and seismic time histories are described. A series of tests on techniques of reduction the effects of pounding are also presented. They are increase in distance of the buildings, application of impact absorbing material and connecting the two buildings together. The results of experiments and analyses indicate both the effectiveness and problems associated with each method of reducing pounding effects. It was found that the impacts absorbing materials were found to be very effective in reducing pounding effect and the responses of frames were very sensitive to the gap between them.
This article appraises the seismic performance of a new braced steel structural system called elliptic braced moment resisting frame (ELBRF). Apart from improving the behavior of a structure, ELBRF is found non-problematic for the bracing system in a given architectural space. In this study, a single cycle time has been used for evaluating the proposed ELBRF. Here, methods of seismic design of structures as well as effective parameters in the seismic design of steel braced including ductility factor, overstrength coefficient and behavior factors, which were obtained by using capacity curves, have been presented through an adaptive pushover analysis (APA). Result of the nonlinear analysis showed that the strength and capacity of energy dissipation in the elliptic bracing system (ELBRF) is more than the system of special moment resisting frames (SMRF), coaxial braced frame (CBF) X-Braced, Inverted-V Braced CBF. Likewise, the permitted relative displacement, where the braced frame reaches to step buckling, is more in ELBRF.