This article appraises the seismic performance of a new braced steel structural system called elliptic braced moment resisting frame (ELBRF). Apart from improving the behavior of a structure, ELBRF is found non-problematic for the bracing system in a given architectural space. In this study, a single cycle time has been used for evaluating the proposed ELBRF. Here, methods of seismic design of structures as well as effective parameters in the seismic design of steel braced including ductility factor, overstrength coefficient and behavior factors, which were obtained by using capacity curves, have been presented through an adaptive pushover analysis (APA). Result of the nonlinear analysis showed that the strength and capacity of energy dissipation in the elliptic bracing system (ELBRF) is more than the system of special moment resisting frames (SMRF), coaxial braced frame (CBF) X-Braced, Inverted-V Braced CBF. Likewise, the permitted relative displacement, where the braced frame reaches to step buckling, is more in ELBRF.
The seismic performance of elliptic braced moment resisting frame (ELBRF) is assessed here and is found that the structural behavior is improved and is of free of architectural space. The demand for seismic performance of ELBRF is estimated through conventional pushover methods of 3, 5, 7, and 10-story ELBRF frames and they are compared with special moment resisting frames (SMRF) and X-Braced CBF and Inverted V-Braced CBF concentrically braced frames. The effective parameters in the seismic design of structures, like the ductility, overstrength and response modification factors are evaluated. The response modification factor for ELBRF in the design by ultimate limit state and allowable stress methods is proposed as 10 and 14.4, respectively. Finally, the process of forming plastic hinges in ELBRF is assessed and it is found that an increase in height makes the plastic hinges to be transmitted to the upper stories, allowing the structure to collapse at higher stories.
Increase of terrorist attack in the present time detects necessity of retrofitting of existent structures or design of new structures which can resist blast loads. In this research, a shear concrete wall subjected to explosive load will be analytically investigated. CFRP sheets will be applied for retrofitting the wall, and its performance in strengthening of the wall will be studied. Also a kind of shear composite wall is modeled and analyzed under the blast load. Results are compared, and advantages and disadvantages of these types of walls will be represented. Validation of analytical simulation is done by modeling of two experimental tests and good agreements have been obtained. Results show that pasting every other CFRP layers in vertical manner will increase performance of the wall as well as warping the entire wall by CFRP sheets. External reinforcement by CFRP will significantly improve energy absorption of the wall comparing use of steel sheets. Also, increase of number of layers causes consideration improve in energy damping and negligible effect on wall displacement.