The nitrogen-vacancy (NV) color center in chemical vapor deposition (CVD) diamond has been widely investigated in quantum information and quantum biosensors due to its excellent photon emission stability and long spin coherence time. However, the temperature dependence of the energy level of NV color centers in diamond is different from other semiconductors with the same diamond cubic structure for the high Debye temperature and very small thermal expansion coefficient of diamond. In this work, a diamond sensor for temperature measurement with high precision was fabricated based on the investigation of the energy level shifts of NV centers by Raman and photoluminescence (PL) spectra. The results show that the intensity and linewidth of the zero-phonon line of NV centers highly depend on the environmental temperature, and the energy level shifts of NV centers in diamond follow the modified Varshni model very well, a model which is better than the traditional version. Accordingly, the NV color center shows the ability in temperature measurement with a high accuracy of up to 98%. The high dependence of NV centers on environmental temperature shows the possibility of temperature monitoring of NV center-based quantum sensors in biosystems.
A polarization-insensitive broadband terahertz absorber based on single-layer graphene metasurface has been designed and simulated, in which the graphene metasurface is composed of isolated circular patches. After simulation and optimization, the absorption bandwidth of this absorber with more than 90% absorptance is up to 2 THz. The simulation results demonstrate that the broadband absorption can be achieved by combining the localized surface plasmon (LSP) resonances on the graphene patches and the resonances caused by the coupling between them. The absorption bandwidth can be changed by changing the chemical potential of graphene and the structural parameters. Due to the symmetrical configuration, the proposed absorber is completely insensitive to polarization and have the characteristics of wide angle oblique incidence that they can achieve broadband absorption with 70% absorptance in the range of incident angle from 0° to 50° for both TE and TM polarized waves. The flexible and simple design, polarization insensitive, wide-angle incident, broadband and high absorption properties make it possible for our proposed absorber to have promising applications in terahertz detection, imaging and cloaking objects.
The rapid development of chip technology has all put forward higher requirements for highly thermally conductive materials. In this work, a new type of material of Fishbone-like silicon carbide (SiC) material was used as the filler in a polyvinylidene fluoride (PVDF) matrix. The silicon carbide/polyvinylidene fluoride (SiC/PVDF) composites were successfully prepared with different loading by a simple mixing method. The thermal conductivity of SiC/PVDF composite reached 0.92 W m−1 K−1, which is 470% higher than that of pure polymer. The results show that using the filler with a new structure to construct thermal conductivity networks is an effective way to improve the thermal conductivity of PVDF. This work provides a new idea for the further application in the field of electronic packaging.
To deal with the heat dissipation problem produced by a high integrated circuit, the preparation of heat spreaders with excellent heat transportation performance is increasing in demand. The Ti 3 C 2 MXene sheets and copper particles were fully contacted with cellulose nanofibers by a high-speed mixer, and the composite film was prepared as a heat spreader under the action of the vacuum-assisted filtration. The MXene sheets are connected by the esterification of the carboxyl group in MXene and the hydroxyl group in cellulose nanofibers to form a chemical bond and consist of the main skeleton of the composite film. Due to the synergistic effects of MXene and copper particles, the in-plane and out-of-plane thermal conductivities of the composite film reach 24.96 and 2.46 W m −1 K −1 , respectively. Compared with the pure cellulose nanofiber films, the thermal conductivity of composite films increased by 2819.2 and 187.6%, respectively. By designing two applications of composite films in the actual use process, the excellent heating conduction abilities in two directions have been proved. This measure to improve the thermal conductivities of composite films by MXene-copper binary fillers also provides ideas for the novel heat spreader.
Nano-crystalline diamond has been extensively researched and applied in the fields of tribology, optics, quantum information and biomedicine. In virtue of its hardness, the highest in natural materials, diamond outperforms the other materials in terms of wear resistance. Compared to traditional single-crystalline and poly-crystalline diamonds, nano-crystalline diamond consists of disordered grains and thus possesses good toughness and self-sharpening. These merits render nano-crystalline diamonds to have great potential in tribology. Moreover, the re-nucleation of nano-crystalline diamond during preparation is beneficial to decreasing surface roughness due to its ultrafine grain size. Nano-crystalline diamond coatings can have a friction coefficient as low as single-crystal diamonds. This article briefly introduces the approaches to preparing nano-crystalline diamond materials and summarizes their applications in the field of tribology. Firstly, nano-crystalline diamond powders can be used as additives in both oil- and water-based lubricants to significantly enhance their anti-wear property. Nano-crystalline diamond coatings can also act as self-lubricating films when they are deposited on different substrates, exhibiting excellent performance in friction reduction and wear resistance. In addition, the research works related to the tribological applications of nano-crystalline diamond composites have also been reviewed in this paper.
Diamond films prepared by chemical vapor deposition will exhibit different surface morphologies, which are determined by the texture and the structural perfection of the deposited diamond. In general, its surface morphology can be controlled by adjusting the deposition conditions. In the present work, textured diamond film was deposited on single crystalline silicon through pre-seeding by diamond nanosheets, rather than controlling the deposition conditions. The employed diamond nano-sheets were prepared by cleavage along a plane, exhibiting good crystallinity. Before chemical vapor deposition, the as-prepared diamond nano-sheets were pre-seeded on the surface of single crystalline silicon as nucleation sites for diamond growth. SEM and XRD results show that the prepared diamond films have a texture. FIB observation reveals that diamonds homogeneously grow on the pre-seeded diamond nano-sheets during chemical vapor deposition, achieving the diamond film with texture. Our work provides a new strategy to prepare textured diamond film.