The output impedance of a power converter plays an important role in the stability assessment of the converter. The impedance can be expressed in different frames such as the stationary frame (phase domain) or in the synchronous frame ( dq domain). To treat the three-phase system like a single-phase system, the system can be divided into positive and negative sequences in the phase domain. This paper demonstrates that there exist couplings between the positive and negative sequences, even in a balanced system due to the PLL, which is important for synchronization. Further it will be shown that even though these couplings are very small in magnitude, they are important in the stability of the converter.
9 March 2018 in IEEE Transactions on Industrial Electronics
In this paper, the selective harmonic elimination (SHE) technique is introduced for a cascaded H-bridge-based static VAR compensator (CHB-STATCOM) with unequal capacitive dc-link voltages. The asymmetric topology allows increasing the number of voltage levels while keeping the converter losses low. Moreover, reactive power control is realized by using the decoupled current control, and the voltage of individual capacitors is controlled by the help of SHE modulation. Mathematical equations are derived for synthesizing the multilevel ac waveform and regulation of dc-link voltages for a CHB inverter with an arbitrary number of H-bridge cells. Then, to verify the theoretical claims, simulation and experimental results are provided for a three-phase CHB inverter with two H-bridge cells in each phase.
21 June 2018 in IEEE Transactions on Energy Conversion
In this paper, some issues related to the impedance based stability criterion such as RHP poles in the minor loop gain, how to specify source and load impedances, and node-dependent stability margins are discussed and the vector fitting method is used to improve the method. This results in an eigenvalue analysis of the system instead of using the Nyquist diagram, and leads to obtain more information about the system. Furthermore, a participation factor analysis can be used to identify the problematic subsystem. The proposed method is examined in the assessment of a stable and an unstable system and simulation results are used for verification
17 July 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Participation factor analysis is an interesting feature of the eigenvalue-based stability analysis in a power system, which enables the developers to identify the problematic elements in a multivendor project like in an offshore wind power plant. However, this method needs a full state-space (SS) model of the elements that is not always possible to have in a competitive world due to confidentiality. In this paper, by using an identification method, the SS models for power converters are extracted from the provided data by the suppliers. Some uncertainties in the identification process are also discussed and solutions are proposed, and in the end the results are verified by time domain simulations for linear and nonlinear cases with different complexities, no matter which domain (phase or dq) is used.
There is a rapid increase in the installed capacity of offshore wind power plants (WPPs) worldwide, and the trend will continue in the context of the recent EU energy crisis and the Ukraine war. As the share of the capacity of wind power plants increases in power systems, it is essential that WPPs can stay connected with the grid during different operational events and provide ancillary services. Recent research has identified the Phase Locked Loop (PLL) converter control as a contributing factor to instabilities driven by large-signal disturbances (i.e. severe grid faults). This type of instability is referred to as grid-synchronisation stability (GSS). In light of this, grid codes are being revised to secure the connection of WPPs and specify the services that need to be provided. To study GSS, it is essential to model the wind turbine (WT) system and grid conditions accurately. However, the actual WT models are often unavailable, black-boxed, or computationally too heavy to model in detail. Thus, simplified reduced-order models (ROM) resembling the actual system behaviour are the need of the hour. This paper presents an improved reduced-order model that considers a systematic approach to modelling the misalignment of the PLL angle in the converter states. Moreover, it considers the time-varying parameters and the step changes of initial states after fault triggering, which otherwise are neglected in the present literature. Our focus in this paper is to propose a novel WT ROM and demonstrate its effectiveness for offline studies. Based on transient stability studies, the improved reduced-order model correctly tracks the grid-angle post grid disturbances, and its trajectory is a good match compared to a detailed simulation mode in time domain.
21 August 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Some couplings exist between the positive- and negative-sequence impedances of a voltage-sourced power converter especially in the low frequency range due to the nonlinearities and low-bandwidth control loops such as the phase-locked loop. In this paper, a new numerical method based on the harmonic transfer function for analysis of the linear time periodic systems is presented, which is able to handle these couplings. In a balanced three-phase system, there is only one coupling term, but in an unbalanced (asymmetrical) system, there are more couplings, and therefore, in order to study the interactions between these couplings a matrix-based method should be used. No information about the structure of the converter is needed and elements are modeled as black boxes with known terminal characteristics. The proposed method is applicable for both power quality (harmonic and interharmonic emissions) and stability studies, which is verified by simulations in this paper.