Graphene oxide and its magnetic nanoparticle-based composites are a well-known tool to remove heavy metals from wastewater. Unfortunately, one of the major issues in handling such small particles consists of their difficult removal from treated wastewater (even when their magnetic properties are exploited), due to their very small diameter. One possible way to overcome this problem is to embed them in a macroscopic biopolymer matrix, such as alginate or chitosan beads. In this way, the adsorbent becomes easier to handle and can be used to build, for example, a packed column, as in a traditional industrial adsorber. In this work, the removal performances of two different embedded magnetic nanocomposite adsorbents (MNAs) are discussed. The first type of MNA is based on ferrite magnetic nanoparticles (MNPs) generated by coprecipitation using iron(II/III) salts and ammonium hydroxide, while the second is based on a 2D material composed of MNP-decorated graphene oxide. Both MNAs were embedded in cross-linked alginate beads and used to treat artificial water contaminated with chromium(III), nickel(II), and copper(II) in different concentrations. The yield of removal and differences between MNAs and non-embedded magnetic nanomaterials are also discussed. From the results, it was found that the time to reach the adsorption equilibrium is higher when compared to that of the nanomaterials only, due to the lower surface/volume ratio of the beads, but the adsorption capacity is higher, due to the additional interaction with alginate.
In the framework of sustainability, water shortages and water pollution are two important aspects to be considered. Proposing efficient and low-impact technologies is of paramount importance to promote circular economies associated with the use of water in the industrial context, especially in the textile industry. In this work, the application of a set of magnetic nanostructured adsorbents (MNAs) to cleanse metal ions from textile wastewaters was studied and analyzed. MNAs were generated with a low-cost process, involving iron (II/III) salts (e.g., chlorides), sodium or ammonium hydroxide solutions, and graphene oxide, obtained from graphite by a modified Hummers’ method at room temperature. The shape and the size were studied with transmission electron microscopy. Adsorbents were tested with different metal ions (e.g., copper, chromium (III), and nickel). Metal ion concentrations were analyzed by means of inductively coupled plasma optical emission spectroscopy (ICP-OES), and adsorption isotherms were characterized. From the results, the MNAs exhibited the capability of removing metal ions up to a yield of 99% for Cr3+, 94.7% for Cu2+, and 91.4% for Ni2+, along with adsorption loads up to 4.56 mg/g of MNAs.
Organic dust explosions were and are still today a critical issue in the food, pharmaceutical, and fine chemical industry. Materials such as flour, corn starch, sugar and APIs represent a cause of severe accidents. In this framework, we investigated a modified version of Recursive Operability Analysis−Incidental Sequence Diagrams (ROA–ISD), called ROA Plus−ISD, specifically tailored to describe industrial processes involving organic combustible dusts. Compared to more classical techniques such as Hazard and Operability (HazOp), ROA−ISD allows for a direct generation of fault trees, providing a useful tool to connect Qualitative with Quantitative Risk Analysis (QRA). ROA Plus−ISD is very similar to ROA−Cause Consequence Diagrams (CCD), which has already proven to be an effective tool to perform both risk assessment on existing plants and reconstructing already occurred accidents, given its logical structure and width of the application fields. In this work, we modified specific parts of the standard ROA−CCD method: (1) the Failure Mode and Operability Analysis (FMEA) database has been structured in order to retrieve the well-known explosion pentagon (for dusts) and all the instruments, devices, apparatuses and controllers typical of industries which process organic dusts; (2) a new comprehensive list of process variables has been compiled. In this way, it is possible to tailor the information required for the generation of the fault trees concerning top events involving mainly dust explosions and fires. This method has been implemented in order to reconstruct the dynamics of the February 2008 Imperial Sugar refinery plant accident (Port Wentworth, GA, USA). Results demonstrated the applicability of the enhanced method by highlighting the criticalities of the process already showed by a previously detailed reconstruction performed by the Chemical Safety Board.
28 February 2024 in Afinidad. Journal of Chemical Engineering Theoretical and Applied Chemistry
Uniform electric field distribution in electroporation is crucial for achieving the effective localized delivery of drug molecules. Currently, in vitro electroporation studies on adherent cells lack a standardized test setup for obtaining consistent and repeatable results, unlike in vitro electroporation studies on cell suspensions that use electroporation cuvettes, which provide uniform electric field distribution. Considering this, we designed, built, and tested a novel inset design for low-volume round well plates, such as the 24- and 96-well plates which are most commonly used in cell culture labs. The inset design was realized using 3D printing and experimentally tested using potato phantoms and HeLa cells. Finite element analysis (FEA) was used to compute the electric field distribution in the round well plates with and without the inset. The FEA indicated that the electric field contour map at the bottom of the well with the inset had a more uniform electric field distribution, with an average value close to the expected 1000 V/cm. In contrast, it was only 840 V/cm without the inset, indicating non-uniform electric field distribution. Uniform electric fields were also obtained using the inset for the potato phantoms and the HeLa cells, indicating the merit of the inset and its usability with low-volume cell culture well plates, which enable the transfer of cells for various assays without additional steps, as well as its cost-effectiveness.
The paper aims to compare different methods able to estimate the specific loss power (SLP) generated by three different types of magnetic nanoparticles, MNPs, dispersed in a suspension fluid, e.g., octane or water. The nanoparticles were characterized morphologically in terms of shape and size, chemically for composition and their physical properties like magnetization and SLP were studied. We evidenced the differences in SLP evaluation due to the applied method, particularly in the presence of thermally induced phenomena such as aggregation or precipitation of MNPs that can affect the heating curve of the samples. Then, the SLP determination methods less sensible to this phenomenon appear to be the ones that use the initial slope when the sample is in quasi-adiabatic condition. Finally, we propose a comparison of those methods based on the pros and cons of their use for the SLP determination of magnetic nanofluids. In particular, the analysis of the behavior of the heating curve is useful to evaluate the useful amplitude of the interval analysis for the initial slope methods.