Fan Yang

Mr. Fan Yang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2017 in Materials
Verified
Journal Article
Open access
PDF file
FYFan Yang
Fan Yang
LZLiang Zhang
Liang Zhang
ZLZhi-Quan Liu
Zhi-Quan Liu
SZSu Juan Zhong
Su Juan Zhong
JMJia Ma
Jia Ma
LBLi Bao
Li Bao
With the purpose of improving the properties of the Sn-58Bi lead-free solder, micro-CuZnAl particles ranging from 0 to 0.4 wt % were added into the low temperature eutectic Sn-58Bi lead-free solder. After the experimental testing of micro-CuZnAl particles on the properties and microstructure of the Sn-58Bi solders, it was found that the wettability of the Sn-58Bi solders was obviously improved with addition of CuZnAl particles. When the addition of CuZnAl particles was 0.2 wt %, the wettability of the Sn-58Bi solder performed best. At the same time, excessive addition of CuZnAl particles led to poor wettability. However, the results showed that CuZnAl particles changed the melting point of the Sn-58Bi solder slightly. The microstructure of the Sn-58Bi solder was refined by adding CuZnAl particles. When the content of CuZnAl addition was between 0.1 and 0.2 wt %, the refinement was great. In addition, the interfacial IMC layer between new composite solder and Cu substrate was thinner than that between the Sn-58Bi solder and Cu substrate.

23 March 2017 in Materials
Verified
Journal Article
Open access
PDF file
LZLiang Zhang
Liang Zhang
ZLZhi-Quan Liu
Zhi-Quan Liu
FYFan Yang
Fan Yang
SZSu-Juan Zhong
Su-Juan Zhong
Cu6Sn5 whiskers precipitated in Sn3.0Ag0.5Cu/Cu interconnection in concentrator silicon solar cells solder layer were found and investigated after reflow soldering and during aging. Ag3Sn fibers can be observed around Cu6Sn5 whiskers in the matrix microstructure, which can play an active effect on the reliability of interconnection. Different morphologies of Cu6Sn5 whiskers can be observed, and hexagonal rod structure is the main morphology of Cu6Sn5 whiskers. A hollow structure can be observed in hexagonal Cu6Sn5 whiskers, and a screw dislocation mechanism was used to represent the Cu6Sn5 growth. Based on mechanical property testing and finite element simulation, Cu6Sn5 whiskers were regarded as having a negative effect on the durability of Sn3.0Ag0.5Cu/Cu interconnection in concentrator silicon solar cells solder layer.

1 June 2018 in Materials Research Express
Verified
Journal Article
Closed access
PDF file
CZChenyu Zhu
Chenyu Zhu
XXXiaojing Xu
Xiaojing Xu
HWHao Wang
Hao Wang
JZJinxin Zhu
Jinxin Zhu
FYFan Yang
Fan Yang
Effect of Mg on microstructure and properties of 7000 high strength rolled aluminum alloy was studied by XRD and EBSD analysis, hardness and electric conductivity test, tensile test and intergranular corrosion experiments. The results show that for Al-8.95Zn-(1.9~2.6)Mg-1.18Cu-0.44Zr 7000 series aluminum alloy, it has excellent comprehensive performance in T76 state with high tensile strength of 585~645MPa and elongation of 10.2~15.4%, and the resistance to intergranular corrosion is excellent(≤ 72μm). When the content of Mg is 2.21%, the aluminum alloy has the highest degree of recrystallization, and the strength and elongation rates of aluminum alloy with T6 and T76 aging state can reach 651.7MPa and 10.7%, 645.6MPa and 15.4%, respectively, but the resistance to intergranular corrosion is relatively poor. At the same time, the resistance to intergranular corrosion of the alloy decreases as the degree of recrystallization increases.

7 April 2021 in DEStech Transactions on Materials Science and Engineering
Verified
Journal Article
Open access
YLYang Liu
Yang Liu
CXChen Xie
Chen Xie
ZFZiwu Fan
Ziwu Fan
FYFan Yang
Fan Yang
CYChang Yang
Chang Yang
GLGuoqing Liu
Guoqing Liu