With the feet of a biped robot attached insecurely to a terrain, its stability is strongly affected by the characteristics of the terrain on which it runs. Therefore, for stable bipedal running, online motion control based on the states of the robot and the environment is needed. This paper proposes a method for online motion control of a running biped robot on an uneven terrain based on a dual linear inverted pendulum model (D-LIPM) and hierarchical control which consists of linear model predictive control (MPC) and quadratic-problem (QP) based momentum control. The D-LIPM, which splits the nonlinear dynamics model of the running biped robot into two linear models under some assumptions, is proposed to generate the running motion through linear MPC. The D-LIPM is applied to the proposed hierarchical control for stable bipedal running. In the first stage of hierarchy, linear MPC is employed to generate the trajectory of the center of mass (COM) based on the dynamics of D-LIPM to overcome terrain uncertainties such as elevation levels and surface conditions at foot-landing sites. In the second stage, momentum control based on a QP solver is used to generate the angular motions of the robot while following the COM trajectory. Computer simulations with uncertainties on the running terrain were carried out to measure the performance of the proposed method.
These days, physical human-robot interaction (pHRI) of social robots has received a lot of attention. This paper proposes a method for variable admittance control (VAC) based pHRI to enable social robots to perform various social gestures. The proposed method includes several schemes. Firstly, a scheme to adjust the robot’s damping is proposed, which takes into account the external torques exerted by the user and the robot’s pose to control movement speed, reflecting the workspaces of both the human and the robot. Secondly, a scheme to change the joint stiffness is proposed, considering the reference angle and the external forces from the user to generate active motions for cooperative pHRI. Additionally, a scheme to change the robot reference point is proposed, which adjusts based on the user’s external forces and the robot’s posture for pHRI in various situations. The proposed methods are implemented with a dual-arm social robot. To realize pHRI based on the proposed schemes, a generalized momentum-based disturbance observer, one of the sensorless disturbance observers, is employed to estimate the exerted torque. To verify the performance of the proposed methods, experiments are carried out for handshaking and hugging.
Recently, there has been increasing interest in physical human-robot interaction (pHRI) of social robots. This paper proposes a model predictive control (MPC)-based approach to realize various pHRI gestures of a social robot. For stable human-robot interaction, generating interactive motion while considering constraints such as workspace and joint velocity limitations is needed. In this study, MPC with adaptive weights is proposed to generate pHRI motion while accounting for these constraints. The weights of the MPC are adjusted to generate various social gestures based on the robot’s posture and the external torques resulting from interactions with humans. The proposed methods are implemented on a dual-arm social robot. To realize the proposed method without additional sensors, a sensorless disturbance observer is employed to estimate external forces. Specifically, to mitigate unintended motions resulting from sudden disturbances during path generation, a regulated disturbance observer is proposed. To evaluate the effectiveness of the proposed methods, experiments were performed with a dual-arm social robot to produce pHRI motions like handshaking and hugging in different situation.
Controlling legged robots to run at high speeds or to traverse complex terrains remains challenging due to the difficulty of handling the interaction between the robot and the ground. Impedance control and model predictive control are widely used to account for ground reaction forces (GRFs) during dynamic locomotion. This paper introduces a model predictive impedance control (MPIC) method that combines the advantages of both strategies and applies it to a quadruped robot. The proposed approach reformulates MPIC within the single rigid body model (SRBM) framework and derives linear inequality constraints for the equivalent wrench, allowing explicit consideration of GRF limits while retaining compliant behavior against ground impacts and external disturbances. Furthermore, a novel optimized gait pattern based on a simplified dynamic model is introduced to minimize the effect of GRFs on the robot. The resulting gait improves stability compared to conventional gait patterns while maintaining a similar level of energy efficiency. The proposed method is validated through various simulations under diverse conditions. The results demonstrate that it enables the quadruped robot to run at a speed of 12 m/s while maintaining stability against repeated lateral disturbances.
The synchronous continuum robot (SCR) was developed to emulate biological structures, such as animal tails and elephant trunks, based on continuum robot principles. By synchronizing disk motions, the SCR generates biologically inspired continuous movements while maintaining precise trajectory control. However, its synchronization-based architecture limits adaptability during physical interaction due to rigid trajectory-following characteristics. To address this limitation, this paper proposes a sensorless variable admittance control (VAC)-based compliant motion generation framework for the SCR. A dynamic model-based sensorless disturbance observer is designed to estimate external torques without additional force sensors. To compensate for uncertainties inherent in the cable-driven transmission mechanism, an adaptive term is incorporated into the parameter identification process, improving disturbance estimation accuracy. Based on the estimated external torques, admittance parameters are adaptively modulated according to joint angles, angular velocities, and robot posture, enabling interaction-aware motion speed regulation. Furthermore, the proposed method simultaneously enforces constraints on both joint angles and angular velocities through the adaptive regulation of target positions and velocities, ensuring safe and physically feasible motion. Experimental results under various interaction scenarios demonstrate reliable contact-independent force estimation and effective compliant motion generation. The proposed framework provides an integrated solution for robust force estimation, adaptive compliance control, and simultaneous constraint enforcement in mechanically synchronized continuum robots.