KUWAR MAUSAM

Mr. KUWAR MAUSAM

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2019 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
KMKUWAR MAUSAM
KUWAR MAUSAM
KSKamal Sharma
Kamal Sharma
GBGaurav Bharadwaj
Gaurav Bharadwaj
RSRavindra P. Singh
Ravindra P. Singh

4 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
BVBhuvaneswari Venkateswaran
Bhuvaneswari Venkateswaran
BDBalaji Devarajan
Balaji Devarajan
ABArulmurugan Balasubramanian
Arulmurugan Balasubramanian
RMR. Mahendran
R. Mahendran
Rajkumar SivanrajuRajkumar Sivanraju
Rajkumar Sivanraju
EEElsayed Tag Eldin
Elsayed Tag Eldin
Increasing global environmental problems and awareness towards the utilization of eco-friendly resources enhanced the progress of research towards the development of next-generation biodegradable and environmentally friendly material. The development of natural-based composite material has led to various advantages such as a reduction in greenhouse gases and carbon footprints. In spite of the various advantages obtained from green materials, there are also a few disadvantages, such as poor interfacial compatibility between the polymer matrix and natural reinforcements and the high hydrophilicity of composites due to the reinforcement of hydrophilic natural fibers. This review focuses on various moisture-absorbing and sound-absorbing natural fiber polymer composites along with the synopsis of preparation methods of natural fiber polymer composites. It was stated in various studies that natural fibers are durable with a long life but their moisture absorption behavior depends on various factors. Such natural fibers possess different moisture absorption behavior rates and different moisture absorption behavior. The conversion of hydrophilic fibers into hydrophobic is deemed very important in improving the mechanical, thermal, and physical properties of the natural-fiber-reinforced polymer composites. One more physical property that requires the involvement of natural fibers in place of synthetic fibers is the sound absorption behavior. Various researchers have made experiments using natural-fiber-reinforced polymer composites as sound-absorbing materials. It was found from various studies that composites with higher thickness, porosity, and density behaved as better sound-absorbing materials.

1 January 2020 in Materials Today: Proceedings
Verified
Journal Article
Closed access
RSRavindra Pratap Singh
Ravindra Pratap Singh
KSKamal Sharma
Kamal Sharma
KMKUWAR MAUSAM
KUWAR MAUSAM

12 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
GSGaneshkumar Selvaraj
Ganeshkumar Selvaraj
BSBipin Kumar Singh
Bipin Kumar Singh
DSDHARANI KUMAR SELVAN
DHARANI KUMAR SELVAN
GSGokulkumar Sivanantham
Gokulkumar Sivanantham
SSSHUBHAM SHARMA
SHUBHAM SHARMA
SSSHUBHAM SHARMA
SHUBHAM SHARMA
Cutting tool characterization plays a crucial role in understanding the behavior of machining operations. The selection of a suitable cutting material, the operating conditions for the work piece, is necessary to yield good cutting-tool life. Several pieces of research have been carried out in cutting-tool characteristics for turning operation. Only a few pieces of research have focused on correlating the vibrations and stress with wear characteristics. This research article deals with stress induced in silicon carbide tool inserts and coated tool inserts while machining SS304 steel. Since this material is much less resistant to corrosion and oxidation it is widely used in engineering applications such as cryogenics, the food industry and liquid contact surfaces. Moreover, these materials have much lower magnetic permeability so they are used as nonmagnetic engineering components which are very hard. This article focuses on the machining of SS304 by carbide tool inserts and then, the cutting forces were observed with a tool dynamometer. Using observed cutting forces, the induced stress in the lathe tool insert was determined by FEA investigation. This research also formulates an idea to predict the tool wear due to vibration. Apparently, the worn-out tool vibrates more than new tools. Using the results, the relation between stress, strain and feed rate, depth of cut and speed was found and mathematically modeled using MINI TAB. It was observed that carbide tool inserts with coating withstand better than uncoated tools while machining SS304. The results were anticipated and correlation between the machining parameters furnished the prediction of tool life and obtaining the best machining outcomes by using coated tool inserts.

9 December 2016 in Materials Today: Proceedings
Verified
Journal Article
Closed access
KMKUWAR MAUSAM
KUWAR MAUSAM
PSPradeep Kumar Singh
Pradeep Kumar Singh
KSKamal Sharma
Kamal Sharma
RGR.C. Gupta
R.C. Gupta

1 January 2022 in REVIEWS ON ADVANCED MATERIALS SCIENCE
Verified
Journal Article
Open access
PDF file
HGHarish Kumar Garg
Harish Kumar Garg
SSSHUBHAM SHARMA
SHUBHAM SHARMA
RKRajesh Kumar
Rajesh Kumar
AMAlakesh Manna
Alakesh Manna
CLChanghe Li
Changhe Li
EEElsayed Mohamed Tag Eldin
Elsayed Mohamed Tag Eldin
In this study, different input parameters for electric discharge machining (EDM) are examined in order to revise the distinctiveness of EDM for machining aluminum-based hybrid metal matrix composites (MMCs). The versatility of hybrid aluminum MMCs makes them very popular and sought after in the automotive, aerospace, marine, and space industries. In this article, an optimized process parameter setting for hybrid MCCs machining with an EDM machine is determined that have silicon carbide (SiCp) and graphite (Grp) particles added as reinforcement materials in varying amounts (Al–0.7Fe–0.6Si–0.375Cr–0.25Zn/10 wt%SiC/3 wt%Gr–MMC, Al–0.7Fe–0.6Si–0.375Cr–0.25Zn/15 wt%SiC/5 wt%Gr–MMC, and Al–0.7Fe–0.6Si–0.373Cr–0.25Zn/20 wt%SiC/8 wt%Gr–MMC). The stir casting method was used to prepare these hybrid aluminum MMCs (3 samples). A study of surface roughness (SR) and material removal rate (MRR) was conducted to examine the effects of dominant parameters. An experiment is planned using a central composite rotatable design (CCRD) of response surface methodology (RSM). It is possible to predict MRR and SR with 95% degree of accuracy by utilizing the quadratic model. Non-dominating Sorting Genetic Algorithm-II was employed to solve “mathematical models” for multi-objective optimization of output response characteristics. The scanning electron microscope (SEM) images of the tool and workpiece materials show that the recast layer has been formed on the tool face and the surface of the machined work-piece. Based on the results, it was determined that an optimal value of MRR (2.97 g·min−1) was obtained at 90 µs, 30 µs, 7.0 V, and 14 A asPon,Poff, gap voltage, and peak current, respectively. As a result of the findings, the SR is reciprocally proportional toPon, and the SR is commensurate withPoff. It was determined that the optimal value of SR (2.41 µm) could be attained at 30 µs, 52 µs, 6.0 V, and 12 A as thePon,Poff, gap voltage, and peak current, respectively. For an optimal set of response variables,Poncan be specified as 30 µs,Poffas 30 µs, gap voltage as 6 V, and peak current as 14 A as process parameters for MRR and SR. The SEM images of the tool material and the workpiece material clearly demonstrate a recast layer formed on the tool face and the machined surface of the workpiece. The optical microscopy analysis reveals a uniform distribution of SiCpand Grpparticles in the Al–0.7Fe–0.6Si–0.375Cr–0.25Zn matrix. In addition to recast layers and machined surfaces, EDS analysis reveals the deposition of tool material on the surface of the workpiece. The composites fabricated may replace materials in many of these applications where “friction” is a significant factor.