Vitamins are a unit of organic chemical substances that are essential for the adequate working of the human body. Water-soluble B vitamins are involved in the regulation of many metabolic and regulatory processes. Due to the inability to synthesize endogenously, they must be supplied to the body with edibles or in the form of supplementation as drugs or dietary supplements. Maintaining the correct level of vitamins is extremely important in the treatment of various diseases. In the presented work, the qualitative and quantitative procedure of the assay of vitamins B1, B2, B5, B6 and B12 in pharmaceutical products by chromatographic technique coupled with densitometric detection was developed, optimized and validated. During the optimization process, TLC Silica gel 60 F254 plates were chosen as a suitable stationary, and the mixture consisted of chloroform: ethanol: water: glacial acetic acid (2:8:2:0.5 v/v/v/v) as a mobile phase. Densitometric detection was conducted at a maximum absorbance λ = 254 nm for vitamins B1, B2, B6 and B12 and λ = 550 nm for vitamin B5 (after dyeing with ninhydrin). In the next step, the developed procedure was validated in accordance with the ICH guidelines. The recorded correlation coefficients obtained in all tested concentrations of B vitamins, ranging from 0.9947 to 0.9996, confirmed good linearity. The method is characterized by good precision, RSD data ranging from 0.62 to 1.52% for direct precision and from 0.84 to 1.4% for intermediate precision. Accuracy was proven by a recovery test at three concentration levels, with values close to 100% with RSD less than 1%. The calculated LOD and LOQ data for all tested vitamins B1, B2, B5, B6 and B12 were belove 1 μg/spot. The developed method was then used to quantitatively and qualitatively assess the content of B vitamins in medicinal products and dietary supplements with satisfactory results.

This study evaluated the antimicrobial efficacy of cefiderocol and various forms of silver (ionic and nanoparticulate) as potential components of wound-dressing reagents against both reference and multidrug-resistant (MDR) Gram-negative bacteria. The anticipated synergistic effect between cefiderocol and nanosilver was not consistently observed; in fact, for reference strains, the combination was less effective than cefiderocol alone. However, in MDR and cefiderocol-resistant A. baumannii strains, combining both agents enhanced antibacterial efficacy. Notably, the effectiveness of silver did not increase with concentration, and low or medium nanosilver concentrations were often more effective. Mechanistically, high concentrations of silver may antagonize cefiderocol’s action by inhibiting bacterial surface proteins involved in siderophore-mediated uptake. Generalized linear modeling confirmed that the strain type, silver form, concentration, and their interactions significantly influenced inhibition zones. These findings highlight the importance of agent selection, concentration, and formulation in designing effective antimicrobial wound dressings. They also suggest that further research is needed to optimize such combination therapies for clinical use.

Currently, there is still a need for broad-spectrum antibiotics. The new cephalosporin antibiotics include, among others, ceftobiprole, a fifth-generation gram-positive cephalosporin, active against Staphylococcus aureus methicillin agonist (MRSA). The main focus of the work was to optimize the conditions of ceftobiprole qualitative determination and to validate the developed procedure according to ICH guidelines. As a result of the optimization process, HPTLC Cellulose chromatographic plates as a stationary phase and a mixture consisting of ethanol:2-propanol: glacial acetic acid: water (4:4:1:3, v/v/v/v) as a mobile phase were chosen. The densitometric detection was carried out at maximum absorbance of ceftobiprole (λ = 232 nm). Next, the validation process of the developed procedure was carried out. The relative standard deviation (RSD) for precision was less than 1.65%, which proves the high compatibility of the results, as well as the LOD = 0.0257 µg/spot and LOQ = 0.0779 µg/spot values, which also confirm the high sensitivity of the procedure. The usefulness of the developed method for the stability studies of ceftobiprole was analyzed. Study was carried out under stress conditions, i.e., acid and alkaline environments, exposure to radiation imitating sunlight and high temperature (40–60 °C). It was found that cefotbiprole is unstable in an alkaline environment and during exposure to UV-VIS radiation. Moreover, the lipophilicity parameter, as a main physicochemical property of the biologically active compound, was determined using experimental and computational methods.

Modern antibiotics face many obstacles, starting with the ever-increasing resistance of microorganisms directed against the antibiotic. An important problem is also the existing trend of polypharmacy. The aim of this study was to develop qualitative and quantitative conditions for the determination of cefepime-hydrochloride solution individually and in mixtures containing other substances with biological activity, such as ketoprofen, gestodene with ethinylestradiol, estradiol, caffeine, calcium ions, paracetamol, bisoprolol, acetylsalicylic acid and ibuprofen, using thin-layer chromatography combined with densitometric analysis. The influence of temperature on the stability of cefepime in these situations was investigated. Furthermore, the effect of UV radiation on the stability of the antibiotic in model drug mixtures was tested. On the basis of the dependence of changes on the concentration of cefepime over time, the order of the reaction was designated, followed by the kinetic parameters of the reactions. Statistical analysis proved that the rate-of-concentration changes in the analyzed conditions corresponded to first-order kinetics. In the course of optimizing the analytical procedure, taking into account the lack of interference of the main peak with the additional peaks and the retardation factor (R_F), the mobile phase with the composition of ethanol: 2-propanol: acetone: water (4:4:1:3, v/v/v/v) was selected, while silica gel 60F₂₅₄ TLC plates were used as the stationary phase. Cefepime-peak areas obtained during the analysis at the analyzed time points allowed us to conclude that the stability of the antibiotic decreased with increasing temperature. The greatest stability was obtained in mixtures with calcium ions (half-life values (t₀.₅) up to 1320.00 h), while the greatest degradation occurred in combination with hormones (t₀.₅, 2.00 h at 40 °C). Studies have also demonstrated the destructive UV-radiation impact on the stability of these antibiotic-drug combinations (t₀.₅, 0.23–0.71 h).

A quick and accurate chromatographic–densitometric method for the determination of ceftobiprole in biological material (whole blood and urine) was developed. Preparation of the test sample required extraction of the drug from the matrix and was carried out by testing methanol or acetone as extracting agents, which were successfully used to isolate ceftobiprole from biological material. Under optimization of the procedure, various stationary and mobile phases were tested. Lastly, HPTLC cellulose plates and a mixture containing ethanol, 2-propanol, glacial acetic acid, and water in the ratio 4:4:1:3 (v/v/v/v) were chosen. Densitometric detection was made at a maximum absorbance of 316 nm. The developed method was validated; a linear function of the ceftobiprole concentration was obtained in the range of 2.4–72 µg/mL (r > 0.99) for both methanol and acetone solutions. The average accuracy of the devised method was measured at nearly 100%; nevertheless, the limit of the quantification was at 8.92 for methanol and 9.14 µg/mL for acetone solution. Therefore, the above method can be successfully used to ceftobiprole in biological material.