This work proposes an efficient catalytic recovery and utilization method for waste polyurethane foam. This method uses ethylene glycol (EG) and propylene glycol (PPG) as two-component alcohololytic agents for the alcoholysis of waste polyurethane foams. For the preparation of recycled polyethers, the conditions of different catalytic degradation systems were catalyzed by duplex metal catalysts (DMC) and alkali metal catalysts, and a synergy with both was also used. The experimental method was adopted with the blank control group and was set up for comparative analysis. The effect of the catalysts on the recycling of waste polyurethane foam was investigated. The catalytic degradation of DMC and the alkali metal catalysts alone, as well as the synergistic effect of the two catalysts, was explored. The findings revealed that the NaOH and DMC synergistic catalytic system was the best, and that the system activity was high under a two-component catalyst synergistic degradation. When the amount of NaOH added in the degradation system was 0.25%, the amount of DMC added was 0.04%, the reaction time was 2.5 h, and the reaction temperature was 160 °C, the waste polyurethane foam was completely alcoholized, and the prepared regenerated polyurethane foam had high compressive strength and good thermal stability. The efficient catalytic recycling method of waste polyurethane foam proposed in this paper has certain guiding and reference values for the practical production of solid-waste-recycled polyurethane.
In this paper, a new type of recycled polyurethane material is used as a new type of wall insulation material, and the new building insulation wall made of this paper has high efficiency thermal insulation and energy-saving characteristics and also has certain environmental significance. The thermal conductivity of the new building cold insulation recycled polyurethane material is 0.023 W/(m·K), and the thermal conductivity of the new building insulation wall prepared is 0.297 W/(m·K). Compared with traditional double-sided plastered porous wall tiles, it can save 85.4% of energy consumption per square meter, with higher thermal insulation characteristics and economic benefits. The preparation of a new type of building insulation wall proposed in this paper provides a new and green way for wall insulation.
Polyurethane (PU) is an indispensable part of people’s lives. With the development of polyurethane, the disposal of polyurethane waste has become a significant issue around the world. Conventional degradation catalysts have poor dispersion and low degradation efficiency when used in the process of solid degradation into liquid. Therefore, this paper innovatively adopts self-made core–shell nanoscale titanium catalysis, traditional alkali metal catalyst (KOH), and polyol to carry out the glycolysis of waste polyurethane (PU) pipeline foam. The homogenized nanoscale titanium catalyst coated with alcohol gel has an obvious core–shell structure. The alcohol gel not only protects the catalyst but also dissolves with the alcoholysis agent in the process of glycolysis and disperses more evenly into the alcoholysis agent to avoid the phenomenon of nanocatalyst agglomeration, so as to facilitate catalytic cracking without reducing catalyst activity. In this study, investigated and compared the production of renewable polyurethane foam via a one-step method based on use of a homogeneous core–shell nanostructured titanium catalyst vs. a traditional alkaline catalyst in terms of the properties of regenerated polyether polyols as well as of the foams produced from these polyols. The physicochemical properties of regenerated polyether polyols that were analyzed included viscosity, hydroxyl value, and average molecular weight. The regenerated polyurethane foams were characterized based on water absorption, TG, SEM, and thermal conductivity analyses. The results show that, when the addition of homogeneous titanium catalyst was T2 0.050 wt.%, the viscosity of regenerated polyether polyols was the lowest, at 5356.7 mPa·s, which was reduced by 9.97% compared with those obtained using the alkali metal catalyst (KOH). When the amount of titanium catalyst was T3 0.075 wt.%, the hard foam made of regenerated polyurethane prepared by the catalyst showed the best properties, with a compressive strength of 0.168 MPa, which is 4.76% higher than that of the foam prepared using KOH catalyst.
A large amount of catalyst waste containing silicon is deposited or buried every year, resulting in serious environmental pollution and a waste of resources. In this paper, a method to prepare mullite whiskers by recycling silica-rich waste under low-temperature conditions was investigated. The effects of raw materials, sintering temperature, catalyst addition, holding time and co-solvent addition on the structure, morphology and phase transition of the synthesized whiskers were investigated and characterized with SEM, XRD, TEM, TG and DTA. The results show that the addition of 10% Na2SO4 as the liquid-phase mass transfer medium could effectively improve the crystallization efficiency of mullite whiskers, while providing an ideal living environment for the growth of whiskers. The crystallinity and uniformity of mullite were positively correlated with the addition of aluminum fluoride trihydrate and the holding time, respectively. The growth law and conditions of mullite whiskers are discussed, and the optimal growth process conditions of mullite whiskers were optimized. The optimal conditions for mullite whiskers were determined as follows: the addition of aluminum fluoride is 5 wt%, the sintering temperature is 825 °C, and the holding time is 5 h at the time of sintering. This work offers new prospects for the industrial production of mullite whiskers from recycled silica-rich waste.
In this study, a liquid regenerated polyether polyol was obtained after the degradation of waste PU foam by the two-component decrosslinker agents ethylene glycol and ethanolamine. The regenerated polyol-based polyurethane foam was modified by adding different ratios of SiO2 aerogel through the self-preparation of silica aerogel (SiO2 aerogel) to prepare aerogel/regenerated polyurethane foam nanocomposites of SiO2 aerogel-modified regenerated polyurethane composites. A series of analytical tests on self-prepared silica aerogel and aerogel-modified recycled polyurethane foam composites were performed. The analysis of the test results shows that the regenerated rigid PU foam obtained with SiO2 aerogel addition of 0.3% in the polyurethane degradation material has a small density, low thermal conductivity, and higher compressive strength; hence, the prepared silica aerogel-regenerated polyol-based polyurethane nanocomposite has good thermal insulation and strength support properties. The clean, low-carbon, and high-value utilization of recycled waste polyurethane was achieved.
Polyurethane (PU) has become one of the most widely used materials in the industrial field due to its excellent performance and wide range of applications. The increasing consumption of polyurethane materials has resulted in significant polyurethane waste. We can recycle waste polyurethane to obtain recycled polyurethane, but to make the recycled polyurethane meet different performance requirements in terms of utility and cost and enable the recycled polyether polyol to be further applied to high-end applications, it is necessary to improve the use value of recycled polyether polyol. In this paper, self-made Fluorodiol was added to the degradation process of waste polyurethane to obtain fluorinated regenerated polyether polyol. Recycled fluorinated polyurethane with excellent performance was prepared using fluorine-containing recycled polyether polyol. The regenerated fluorinated polyether polyols were characterized by infrared spectroscopy, viscosity, hydroxyl value, and GPC molecular weight distribution. The density, apparent morphology, water absorption, mechanical strength, thermal conductivity, and thermal stability of RFPU rigid foams with different fluorine contents were studied by scanning electron microscopy. The results show that when the addition of Fluorodiol was 8% of the mass of waste polyurethane, the density was 41.2 kg/m3, the immersion loss rate was 2.125%, the compressive strength was 0.315 Mpa, and the thermal conductivity was 0.0227 W/m·K. The RFPU prepared by Fluorodiol has low surface energy, good compressive strength, hydrolysis resistance, and is expected to be widely used in special insulation materials. Thus, the sustainable recycling of polyurethane is achieved.
About Me
Shangwen Zhu received the M.S. degree from Northeast Petroleum University in 2021.
Shangwen Zhu received the M.S. degree from Northeast Petroleum University in 2021.