Yanwei Zhu

Mr. Yanwei Zhu

Donghua University, Shanghai, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
XGXiaohua Gu
Xiaohua Gu
肖尧 王肖尧 王
肖尧 王
TWTong Wang
Tong Wang
Yanwei ZhuYanwei Zhu
Yanwei Zhu
XGXinyu Guo
Xinyu Guo
YLYan Liu
Yan Liu
Polyurethane (PU) is an indispensable part of people’s lives. With the development of polyurethane, the disposal of polyurethane waste has become a significant issue around the world. Conventional degradation catalysts have poor dispersion and low degradation efficiency when used in the process of solid degradation into liquid. Therefore, this paper innovatively adopts self-made core–shell nanoscale titanium catalysis, traditional alkali metal catalyst (KOH), and polyol to carry out the glycolysis of waste polyurethane (PU) pipeline foam. The homogenized nanoscale titanium catalyst coated with alcohol gel has an obvious core–shell structure. The alcohol gel not only protects the catalyst but also dissolves with the alcoholysis agent in the process of glycolysis and disperses more evenly into the alcoholysis agent to avoid the phenomenon of nanocatalyst agglomeration, so as to facilitate catalytic cracking without reducing catalyst activity. In this study, investigated and compared the production of renewable polyurethane foam via a one-step method based on use of a homogeneous core–shell nanostructured titanium catalyst vs. a traditional alkaline catalyst in terms of the properties of regenerated polyether polyols as well as of the foams produced from these polyols. The physicochemical properties of regenerated polyether polyols that were analyzed included viscosity, hydroxyl value, and average molecular weight. The regenerated polyurethane foams were characterized based on water absorption, TG, SEM, and thermal conductivity analyses. The results show that, when the addition of homogeneous titanium catalyst was T2 0.050 wt.%, the viscosity of regenerated polyether polyols was the lowest, at 5356.7 mPa·s, which was reduced by 9.97% compared with those obtained using the alkali metal catalyst (KOH). When the amount of titanium catalyst was T3 0.075 wt.%, the hard foam made of regenerated polyurethane prepared by the catalyst showed the best properties, with a compressive strength of 0.168 MPa, which is 4.76% higher than that of the foam prepared using KOH catalyst.

23 March 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XGXiaohua Gu
Xiaohua Gu
PCPeiquan Chen
Peiquan Chen
TWTong Wang
Tong Wang
SLSiwen Liu
Siwen Liu
SZShangwen Zhu
Shangwen Zhu
YLYan Liu
Yan Liu
A large amount of catalyst waste containing silicon is deposited or buried every year, resulting in serious environmental pollution and a waste of resources. In this paper, a method to prepare mullite whiskers by recycling silica-rich waste under low-temperature conditions was investigated. The effects of raw materials, sintering temperature, catalyst addition, holding time and co-solvent addition on the structure, morphology and phase transition of the synthesized whiskers were investigated and characterized with SEM, XRD, TEM, TG and DTA. The results show that the addition of 10% Na2SO4 as the liquid-phase mass transfer medium could effectively improve the crystallization efficiency of mullite whiskers, while providing an ideal living environment for the growth of whiskers. The crystallinity and uniformity of mullite were positively correlated with the addition of aluminum fluoride trihydrate and the holding time, respectively. The growth law and conditions of mullite whiskers are discussed, and the optimal growth process conditions of mullite whiskers were optimized. The optimal conditions for mullite whiskers were determined as follows: the addition of aluminum fluoride is 5 wt%, the sintering temperature is 825 °C, and the holding time is 5 h at the time of sintering. This work offers new prospects for the industrial production of mullite whiskers from recycled silica-rich waste.

25 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
DZDasheng Zhang
Dasheng Zhang
XGXiaohua Gu
Xiaohua Gu
SLSiwen Liu
Siwen Liu
YLYan Liu
Yan Liu
QZQing-Yun Zhou
Qing-Yun Zhou
Yanwei ZhuYanwei Zhu
Yanwei Zhu
Polyurethane (PU) has become one of the most widely used materials in the industrial field due to its excellent performance and wide range of applications. The increasing consumption of polyurethane materials has resulted in significant polyurethane waste. We can recycle waste polyurethane to obtain recycled polyurethane, but to make the recycled polyurethane meet different performance requirements in terms of utility and cost and enable the recycled polyether polyol to be further applied to high-end applications, it is necessary to improve the use value of recycled polyether polyol. In this paper, self-made Fluorodiol was added to the degradation process of waste polyurethane to obtain fluorinated regenerated polyether polyol. Recycled fluorinated polyurethane with excellent performance was prepared using fluorine-containing recycled polyether polyol. The regenerated fluorinated polyether polyols were characterized by infrared spectroscopy, viscosity, hydroxyl value, and GPC molecular weight distribution. The density, apparent morphology, water absorption, mechanical strength, thermal conductivity, and thermal stability of RFPU rigid foams with different fluorine contents were studied by scanning electron microscopy. The results show that when the addition of Fluorodiol was 8% of the mass of waste polyurethane, the density was 41.2 kg/m3, the immersion loss rate was 2.125%, the compressive strength was 0.315 Mpa, and the thermal conductivity was 0.0227 W/m·K. The RFPU prepared by Fluorodiol has low surface energy, good compressive strength, hydrolysis resistance, and is expected to be widely used in special insulation materials. Thus, the sustainable recycling of polyurethane is achieved.

2 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
XGXiaohua Gu
Xiaohua Gu
Yanwei ZhuYanwei Zhu
Yanwei Zhu
SLSiwen Liu
Siwen Liu
SZShangwen Zhu
Shangwen Zhu
YLYan Liu
Yan Liu
The massive accumulation of industrial waste has become an environmental problem that is very difficult to deal with. In this paper, mullite whisker nanomaterials were developed independently using industrial waste residues, which were used to degrade polyurethane (PU) solid waste by alcoholysis with ethylene glycol (EG) and ethanolamine (ETA) bi-component, and mullite modified regenerated polyol materials were obtained by double waste synergistic recycling. Mullite/PU foam nanocomposites were prepared by one-step foaming. The analysis of the test results shows that, at EG/ETA = 2:1 and mullite whisker addition of 0.15%, the regenerated rigid PU foam obtained has low thermal conductivity and higher compressive strength, at which time the regenerated PU foam has the best performance. The FTIR test results show that the silanol of mullite reacts with isocyanate during foaming and is attached to the polyurethane chain, such that the compressive strength and thermal insulation properties are maximized. It provides a new way to create a “double waste synergy” for preparing high-value materials by comprehensively utilizing resources.