Based on theoretical calculations, laboratory simulation research and industrial production data analysis combined with characterisations such as metallographic microscope, scanning electron microscope (SEM), transmission electron microscope (TEM) and microhardness testing, this study investigated the state of occurrence and the precipitation law of vanadium (V) in microalloyed steel to determine a reasonable production process for V microalloyed steel. The results showed that the V(C,N) precipitation phase was the main form of V in microalloyed steel that precipitated after the transformation of austenite to ferrite. The amount of V precipitation was positively correlated with the amount of V that was added. However, the precipitation temperature was not significantly correlated with the amount added. When the V content increased from 0.03% to 0.06%, the initial precipitation temperature only increased by 23 °C. The coiling temperature was identified as the core factor affecting the strength of V microalloyed steel. When the effects of precipitation strengthening and microstructure strengthening were considered, as the coiling temperature decreased, the strength first increased, then decreased and finally increased again. Under different processing conditions, the strengthening of vanadium in the material increased first and then decreased as the temperature decreased (700–200 °C). The corresponding temperatures for the best strengthening effect of aging treatment, industrial statistical data and simulating coiling were 550, 470 and 400 °C, respectively. The difference between laboratory research results and industrial production was found. When V precipitation strengthening was used to improve material properties, it was necessary to determine a reasonable quantity of V to add and the production process, according to different alloy systems, to make more effective use of V microalloyed resources.
Organic supercapacitors (OSCs) suffer from sluggish Li+ desolvation and ion diffusion kinetics, limiting their electrochemical performance and practical application. Heteroatom doping is a valid strategy to improve the capacitive properties of carbon electrode materials. Herein, density functional theory (DFT) first-principles calculations were adopted to systematically investigate and compare the effects of equal-concentration N and P doping on the Li+ desolvation behavior, capacitance performance, and ion diffusion kinetics of single-walled carbon nanotubes (SWCNTs) in acetonitrile-based electrolytes. The results show that N doping maintains the [Li(AN)]+ critical desolvation size (5.91 Å) of pristine SWCNTs, while P doping increases this size to 6.11 Å. Benefiting from the optimized desolvation behavior, P-doped SWCNTs achieve a maximum relative capacitance 1.9 times that of pristine SWCNTs, outperforming N-doped SWCNTs (1.3 times). Moreover, P doping significantly reduces the [Li(AN)]+ diffusion barrier to 0.99 eV, much lower than that of pristine and N-doped SWCNTs, thereby accelerating ion migration. Electronic structure analysis confirms that heteroatom doping weakens electron localization and C-heteroatom covalent bonding, and the weaker P-C bonding further accounts for the superior performance of P-doped SWCNTs. This study clarifies the intrinsic regulatory mechanism of N/P doping on Li+ desolvation and electrochemical performance of SWCNTs, providing a theoretical guideline for the design of high-performance carbon-based electrodes for OSCs.