Antibiotics and antibiotic resistance genes (ARGs) have been regarded as emerging pollutants and pose significant threats to the aquatic environment and to human health. This study aimed to investigate the removal of nutrients, antibiotics, and the emergency of ARGs in domestic sewage by means of constructed wetlands (CWs) filled with an electroconductive media, i.e., coke. In this study, the antibiotics removal efficiencies ranged from 13% to 100%, which were significantly higher in the system filled with coke compared with the CWs filled with common quartz sand (7~100%). Moreover, the presence of wetland plants could also significantly improve the removal of nutrients and tetracyclines. The results also demonstrated the importance of substrate selection and wetland plants in CWs on the alternation of microbial communities and structures, where the electroconductive media showed a promising effect on increasing the removal of antibiotics in CWs. In terms of the emergency of ARGs, the CWs filled with coke retained the most ARGs (10,690 copies/g) compare with the control groups (8576–7934 copies/g) in the substrate. As the accumulated ARGs could be released back to the watercourse due to the environmental/operation condition changes, the application of such an advanced substrate in CWs may pose a more significant potential threat to the environment. With these results, this study provided new insight into selection of the substrates and plants for wastewater treatment to achieve a sustainable and secure water future.

This study aimed at optimizing horizontal subsurface flow constructed wetlands (CWs) to improve hydraulic performance and pollutant removal efficiency. A groundwater modeling package (MODFLOW) was used to optimize three design parameters (length-to-width ratio, inlet/outlet-to-length ratio, and substrate size configuration). Using the optimized parameters, three pilot-scale CWs were built to treat actual wastewater. For model validation, we used a tracer test to evaluate hydraulic performance, and investigated the pollutant spatial distributions and removal efficiencies. We conclude that MODFLOW is suitable for designing CWs, accurately predicting that increasing hydraulic conductivity from surface to bottom layers could improve performance. However, the effect of vegetation, which decreased the hydraulic conductivity of the surface layer, should be considered to improve simulation results. Multilayer substrate configuration, with increasing hydraulic conductivity from the surface to bottom layers, significantly increased pollutant removal compared with monolayer configuration. The spatial variation in pollutant transport and degradation through the filling substrate showed that the multilayer configuration was able to increase use of the available space and moderately reduced short-circuiting and dead zones. Thus, multilayer CWs had higher experimental retention times, effective volume fractions and hydraulic efficiencies, and lower short-circuiting compared with monolayer CWs operating under similar conditions.

Microbial fuel cell (MFC) coupled with constructed wetland (CW) is an innovative technology for wastewater treatment. Based on the current studies, the article reviewed the configuration and evaluation indicators of CW-MFC, and discussed the influence factors of MFC-CW performance, including pH, electron donors and acceptors, electrode materials, the electrode spacing and CW matrixes. Key unresolved issues were concluded for potential applications of MFC-CW in the future.