A flexible, low-cost energy-harvesting device based on the magnetoelectric (ME) effect was designed using Fe 64 Co 17 Si 7 B 12 as amorphous magnetostrictive ribbons and polyvinylidene fluoride (PVDF) as the piezoelectric element. A 3 cm-long sandwich-type laminated composite was fabricated by gluing the ribbons to the PVDF with an epoxy resin. A voltage multiplier circuit was designed to produce enough voltage to charge a battery. The power output and power density obtained were 6.4 μ W and 1.5 mW cm −3 , respectively, at optimum load resistance and measured at the magnetomechanical resonance of the laminate. The effect of the length of the ME laminate on power output was also studied: the power output exhibited decays proportionally with the length of the ME laminate. Nevertheless, good performance was obtained for a 0.5 cm-long device working at 337 KHz within the low radio frequency (LRF) range.
30 June 2015 in Journal of Physics: Condensed Matter
A comparative study of four series of pyrrhotite-type chalcogenide compounds Fe
7−
yMyX8 ( X = S, Se) with substitution of Ti or Co for iron has been performed by means of x-ray and neutron powder diffraction, and by magnetization measurements. In Fe
7−
yMyX8 compounds having a ferrimagnetic order at , the substitution of either Ti or Co for iron is observed to result in a monotonous decrease of the magnetic ordering temperature, while the resultant magnetization shows a non-monotonous behavior with a minimum around –1.5 in all the Fe
7−
yMyX8 families except Fe
7−
y Co y Se 8 . Suppression of a magnetically ordered state with substitutions in Fe
7−
yMyX8 is ascribed to nearly zero values of Ti and Co magnetic moments, while the non-monotonous changes of the resultant magnetization are explained by the compensation of the sublattice magnetizations due to the non-random substitutions in alternating metallic layers. The difference in the cation partitioning observed in Fe
7−
y Ti yX8 and Fe
7−
y Co yX8 is attributed to the difference in the spatial extension of Ti and Co 3d orbitals. High coercive field values (20–24 kOe) observed at low temperatures in the Ti-containing compounds Fe
7−
y Ti yX8 with y ⩾ 3 are suggested to result from the enhancement of Fe orbital moment due to the Ti for Fe substitution.
26 July 2015 in Physics of Metals and Metallography
The effect of the composition and annealing temperature on the structure and magnetic properties of soft magnetic nanocrystalline Fe-Cu-Nb-Mo-Si-B alloys has been studied. An increase in the iron...