With the ongoing amendment of the EU legislation on the treatment of urban wastewater, stricter requirements for the removal of pollutants are expected, which calls for the need for innovative wastewater treatment technologies. Biological systems are still the first choice. A survey of typical bioreactors applied in wastewater treatment is presented. The wastewater treatment objective, biochemical environment, and microbial growth are selected as the main criteria for the classification of these bioreactors. Hydraulic and kinetic aspects are considered, along with the advantages and drawbacks of these bioreactors regarding the selection of the appropriate type of reactor; as well, details regarding the operation of reactors are mentioned. The aim of this paper is to provide operators and designers with a brief overview of the selected traditional and advanced processes, reactors, and technologies for nutrient removal from municipal wastewater. The possibilities and limitations in complying with more strict effluent standards are also discussed. Methods of nutrient recovery are added value. From the evaluation of the published papers, we determine that the currently applied traditional methods for nutrient removal have the potential to also convey the expected stricter limits.
In today’s ongoing rapid urban expansion, deforestation and climate changes can be observed mainly as unbalanced rain occurrence during the year, long seasons without any rain at all and unordinary high temperatures. These adverse changes affect underground water levels and the availability of surface water. In addition, quite a significant proportion of drinking water is used mainly for non-drinking purposes. With several EU countries increasingly suffering from droughts, reusing quaternary treated urban wastewater can help address water scarcity. At the European level, Regulation 2020/741 of the European Parliament and of the Council of 25 May 2020 on minimum requirements for water reuse was adopted. This regulation foresees the use of recycled wastewater mainly for agricultural irrigation. This article provides an overview of various processes, such as filtration, coagulation, adsorption, ozonation, advanced oxidation processes and disinfection, for quaternary treatment of urban wastewater in order to remove micropollutants and achieve the requirements for wastewater reuse. According to the literature, the most effective method with acceptable financial costs is a combination of coagulation, membrane filtration (UF or NF) and UV disinfection. These processes are relatively well known and commercially available. This article also helps researchers to identify key themes and concepts, evaluate the strengths and weaknesses of previous studies and determine areas where further research is needed.
With the ongoing amendment of the EU legislation on the treatment of urban wastewater, stricter requirements for the removal of pollutants are expected, which calls for the need for innovative wastewater treatment technologies. Biological systems are still the first choice. The survey of typical bioreactors applied in wastewater treatment is presented. Wastewater treatment objective, bio-chemical environment and microbial growth are selected as a main criterion for classification of these bioreactors. Hydraulic and kinetic aspects are considered, advantages and drawbacks of these bioreactors regarding the selection of appropriate type of the reactor as well as regarding operation of reactors are mentioned. The aim of this paper is to provide operators and designers with a brief overview of selected traditional and advanced processes, reactors, and technologies for nutrient removal from municipal wastewater. Another goal is to discuss the possibilities and limitations to comply with more strict effluent standards. From the evaluation of the published papers, it follows that the currently applied traditional methods of nutrients removal have the potential to convey also with the expected stricter limits.
Micropollutants belong to various groups of chemicals. One of the most diverse and large group of them are pharmaceuticals. The presence of pharmaceutical residues in wastewater poses a significant challenge to water quality and environmental health. This paper provides an overview of recent advancements in the removal of pharmaceuticals from water, focusing on various treatment processes and their effectiveness in eliminating micropollutants. Through a review of the literature, including studies on ozonation, UV irradiation, sulfate radical-based technologies, and photocatalytic processes, insights into degradation mechanisms and optimal conditions for their removal are synthesized. Additionally, with new legislation mandating the monitoring of selected micropollutants and the implementation of quaternary treatment in wastewater treatment plants, the paper discusses prospects for future research and recommendations for effective pharmaceutical removal. Key actions include conducting comprehensive laboratory and pilot trials, implementing quaternary treatment of wastewater, continuously monitoring water quality, investing in research and development, and promoting collaboration and knowledge sharing among stakeholders. By embracing these strategies, we can work towards safeguarding water resources and protecting public health from the adverse effects of pharmaceutical contamination.
The lack of calcium and magnesium in drinking water affects people’s health, especially cardiovascular and oncologic diseases, and causes corrosion problems. The aim of this paper is to present the methodology of the design, scale-up, and construction of a fluidized bed reactor (FBR) system for drinking water recarbonization with biogenic elements in real conditions. Half-calcined dolomite (HCD) in combination with CO2 was identified as a suitable source of Mg2+ and Ca2+. The experimental results confirmed that an FBR reactor with a water tank is an efficient system for Mg and Ca2+ ion concentrate production. The main process parameters and dimensions of the equipment were determined based on the experimental data and the data obtained showed that the system can be used in real conditions to produce Mg2+ and Ca2+ ions concentrate, which is mixed with soft water in required proportions. The FBR with an internal diameter of 0.16 m and a total height of 3.7 m was designed. The proposed methodology of the recarbonization process design was used in a further system scale-up for a ten times larger capacity. Long-term experiments indicate that the HCD recarbonization process is robust and can return to the steady state even after significant changes in the process parameters for providing the desired concentration of Mg2+ and Ca2+ ions in drinking water.
Micropollutants belongs to various groups of chemicals. One of the most diverse and large group of them are pharmaceuticals. The presence of pharmaceutical residues in wastewater poses a significant challenge to water quality and environmental health. This paper provides an overview of recent advancements in the removal of pharmaceuticals from water, focusing on various treatment processes and their effectiveness in eliminating micropollutants. Through a review of literature, including studies on ozonation, UV irradiation, sulphate radical-based tech-nologies, and photocatalytic processes, insights into degradation mechanisms and optimal con-ditions for their removal are synthesized. Additionally, with new legislation mandating the monitoring of selected micropollutants and the implementation of quaternary treatment in wastewater treatment plants, the paper discusses prospects for future research and recommen-dations for effective pharmaceuticals removal. Key actions include conducting comprehensive laboratory and pilot trials, implementing quaternary treatment of wastewaters, continuously monitoring of water quality, investing in research and development, and promoting collabora-tion and knowledge sharing among stakeholders. By embracing these strategies, we can work towards safeguarding water resources and protecting public health from the adverse effects of pharmaceutical contamination.