The vortex-induced force of bridges is not synchronized along the span direction. The spatial correlation of vortex-induced force becomes obvious when the span of the bridge structure gradually increases, and the mass gradually decreases. Therefore, it is important to study the spanwise correlation of vortex-induced forces of long-span bridges to ensure the accuracy of the prediction of vortex-induced vibration response of bridges. The study established and improved the theory and experimental research methods for vortex-induced vibration analysis of large-span bridges by discussing the spanwise correlation during vortex-induced vibration of the split double-box beam. Taking Xihoumen Bridge as the object, two-dimensional (2D) and three-dimensional (3D) numerical models of the scaled-down sections were designed and established based on the ANSYS Fluent platform and the RANS SST turbulence model. Based on the Newmark-β algorithm, a User Defined Function (UDF) was written for vortex vibration calculation, the three-dimensional bypass of the split double-box beam in static conditions and vortex-induced vibration of the split double-box beam of which were calculated, and the spanwise correlations of the aerodynamic coefficients, the surface pressure coefficients, and the wake wind velocity of the main girder section were analyzed for the static and vibration states of the bridge. The results show that the self-excited force of the split double-box beam in vortex-induced vibration improved its spanwise correlation. Compared with those in a static state, the spanwise correlation of the lift coefficient and torque coefficient increased by 55% and 87%, respectively, and the resistance coefficient increased by more than 10 times. The correlation of the pressure coefficients increased by 153%. The correlation of wake wind velocity increased by 37% in the along-wind direction and that in the across-wind and vertical-wind direction increased by more than 10 times. The accuracy of the numerical simulation results was verified by comparing the pressure distribution and pressure spanwise correlation of the main beam with field-measured data.

The large-span bridge is highly sensitive to temperature and wind loads. Therefore, it is essential to study the bridge’s fatigue life under the combined effects of temperature and static wind loads. This study focuses on the main bridge of Qiao Jia-fan 2# on the Yinkun Expressway (G85), with a span of 250 m and a configuration of a PC composite box girder bridge with corrugated steel webs. Firstly, on-site temperature and wind direction measurements with wind speed were conducted at the bridge site. Origin 2022 software is used to make mathematical statistics on the data, the representative values of atmospheric temperature difference between day and night and the basic wind speeds are calculated. Secondly, based on the basic wind speed in the most unfavorable wind direction, the static three-component force coefficients of bridge at different angles of attack are calculated by FLUENT 2022 R1 software. By comparison, the most unfavorable wind angle of attack, wind direction and wind load value of Qiao Jia-fan 2# Bridge are obtained. Finally, the finite element software MIDAS/FEA NX 2022 is used to analyze the fatigue life of the main bridge of the Qiao Jia-fan 2# Bridge. The analysis results show that the representative value of the temperature difference between day and night in the area where PC composite box girder bridge with corrugated steel webs is located is 22 °C, the most unfavorable wind direction is NNE wind direction, and the most unfavorable wind attack angle is 3° wind attack angle. It is found that the maximum stress of concrete and corrugated steel webs appears near the 0# block, and the life of corrugated steel webs is far greater than that of concrete.

Under the impetus of achieving global sustainable development goals, the civil construction industry is accelerating its transition towards high-quality, green, and low-carbon practices. Prefabricated, modular building technology has become a key tool due to its advantages in energy conservation, emission reduction, and shortened construction periods. However, existing research on the seismic performance of prefabricated, modular, reinforced concrete column–beam (RCS) composite structures often focuses on the construction form of beam–column joints, paying less attention to the impact of floor slabs on the seismic performance of joints during earthquakes. This may make joints a weak link in structural systems’ seismic performance. To address this issue, this paper designs a prefabricated, modular RCS composite joint considering the effect of floor slabs and uses the finite element software ABAQUS 2023 to perform a quasi-static analysis of the joint. The reliability of the method is verified through comparisons with the experimental data. This study examines various aspects, including the joint design and the material’s constitutive relationship settings, focusing on the influence of parameters, such as the axial compression ratio and floor slab concrete strength, on the joint seismic performance. It concludes that the seismic performance of the prefabricated, modular RCS composite joints considering the effect of floor slabs is significantly improved. Considering the composite effect of the slabs, the yield loads in the positive and negative directions for node FJD-0 increased by 78.9% and 70.0%, respectively, compared to that of the slab-free node RCSJ3. The ultimate bearing capacities improved by 13.2% and 9.98%, respectively, and the energy dissipation capacity increased by 23%. Additionally, the variation in the axial load ratio has multiple effects on the seismic performance of the joints. Increasing the slab thickness significantly enhances the seismic performance of the joints under positive loading. The bolt pre-tensioning force has a crucial impact on improving the bearing capacity and overall stiffness of the joints. The reinforcement ratio of the slabs has a notable effect on the seismic performance of the joints under negative loading, while the concrete strength of the slabs has a relatively minor impact on the seismic performance of the joints. Therefore, the reasonable design of these parameters can optimize the seismic performance of joints, providing a theoretical basis and recommendations for engineering application and optimization.

Comparing the empirical modal decomposition (EMD) method and the modified ensemble empirical modal decomposition (MEEMD) method, a response analysis of the long-period components, with the separation and reconstruction of the two methods, and the original long-period ground vibration on high-pier bridges is carried out to verify the validity of the extracted long-period components. In addition, the response characteristics of the components extracted based on the MEEMD and the original ground vibration are studied on the bridges at different points. The results show that, through the correlation of the displacement response of the bridge piers, the long-period component of the long-period ground shaking can well reflect the response characteristics of the long-period ground shaking on the long-period structure, and the MEEMD provides better results than the EMD extraction method. The long-period structure resonates during the long-period component of the long-period ground shaking, the short-period structure resonates during the short-period component, and the structural seismic response is similar to the self-resonance of the structure. The seismic response of the structures is closely related to the self-oscillation period and the spectral parameters of the ground shaking.