Providing safe drinking water to people in developing countries is an urgent worldwide water problem and a main issue in the UN Sustainable Development Goals. One of the most efficient and cheapest methods to attain these goals is to promote the use of slow sand filters. This review shows that slow sand filters can efficiently provide safe drinking water to people living in rural communities not served by a central water supply. Probably, the most important aspect of SSF for developing and less-developed countries is its function as a biological filter. WASH problems mainly relate to the spread of viruses, bacteria, and parasites. The surface and shallow groundwater in developing countries around urban areas and settlements are often polluted by domestic wastewater containing these microbes and nutrients. Thus, SSF’s function is to treat raw water in the form of diluted wastewater where high temperature and access to nutrients probably mean a high growth rate of microbes and algae but probably also high predation and high efficiency of the SSF. However, factors that may adversely affect the removal of microbiological constituents are mainly low temperature, high and intermittent flow rates, reduced sand depth, filter immaturity, and various filter amendments. Further research is thus needed in these areas, specifically for developing countries.

The copolymer of N,N-diallyl-N,N-dimethylammonium chloride and N-[3-(Dimethylamino)propyl]methacrylamide (DADMAC–DMAPMA) was synthesized by radical polymerization reaction in an aqueous solution in the presence of the initiator ammonium persulfate (NH₄)₂S₂O₈. The molar compositions of the synthesized copolymers were determined using FTIR and ¹H NMR-spectroscopy, elemental analysis, and conductometric titration. It was found that in the radical copolymerization reaction, the DMAPMA monomer was more active than the DADMAC monomer; for this reason, the resulting copolymers were always enriched in the DMAPMA monomers. The study of the influence of the DADMAC–DMAPMA copolymer on structure-formation in the bentonite suspension showed that this copolymer significantly increased the static shear stress (SSS) of the system. In this case, the structure-forming properties of the copolymer depended on the pH of the medium. The lower the pH level, the better the structure-formation was in the suspension in the presence of the copolymer. The study of antibacterial activity showed that the DADMAC–DMAPMA copolymer had a biocidal effect against sulfate-reducing bacteria (CRB) at a concentration of not less than 0.05 wt.% and can be used to inhibit the growth of this bacteria.