The fundamental objective of economic load dispatch is to operate the available generating units such that the needed load demand satisfies the lowest generation cost and also complies with the various constraints. With proper power system operation planning using optimized generation limits, it is possible to reduce the cost of power generation. To fulfill the needs of such objectives, proper planning and economic load dispatch can help to plan the operation of the electrical power system. To optimize the economic load dispatch problems, various classical and new evolutionary optimization approaches have been used in research articles. Classical optimization techniques are outdated due to many limitations and are also unable to provide a global solution to the ELD problem. This work uses a new variant of particle swarm optimization techniques called modified particle swarm optimization, which is effective and efficient at finding optimum solutions for single as well as multi-objective economic load dispatch problems. The proposed MPSO is used to solve single and multi-objective problems. This work considers constraints like power balance and power generation limits. The proposed techniques are tested for three different case studies of ELD and EELD problems. (1) The first case is tested using the data of 13 generating unit systems along with the valve point loading effect; (2) the second case is tested using 15 generating unit systems along with the ramp rate limits; and (3) the third case is tested using the economic emission dispatch (EELD) as a multi-objective problem for 6 generating unit systems. The outcomes of the suggested procedures are contrasted with those of alternative optimization methods. The results show that the suggested strategy is efficient and produces superior optimization outcomes than existing optimization techniques.

Proposed in this paper is a new particle swarm optimization technique for the solution of economic load dispatch as well as environmental emission of the thermal power plant with power balance and generation limit constraints. Economic load dispatch is an online problem to minimize the total generating cost of the thermal power plant and satisfy the equality and inequality constraints. Thermal power plants use fossil fuels for the generation of power; fossil fuel emits many toxic gases which pollute the environment. This paper not only considers the economic load dispatch problem to reduce the total generation cost of the thermal power plant but also deals with environmental emission minimization. In this paper, fuel cost and the environmental emission functions are considered and formulated as a multiobjective economic load dispatch problem. For obtaining the solution of multiobjective economic load dispatch problem a new PSO called moderate random search PSO was used. MRPSO enhances the ability of particles to explore in the search spaces more effectively and increases their convergence rates. The proposed algorithm is tested for the IEEE 30 bus test systems. The results obtained by MRPSO algorithm show that it is effective and efficient.

Most power is generated using fossil fuels like coal, natural gas, and diesel. The contribution of coal to power generation is very high compared to other sources. Almost all thermal power plants use coal as a fuel for power generation. Such sources of fossil fuels are limited and thus the cost of power generation increases. At the same time, the induced toxic gases due to these fossil fuels pollute the environment. The objective of this work is to solve the economic emission dispatch problem. Economic emission dispatch helps to find out how to operate power plants at the minimum cost and induce the minimum emissions at a thermal power plant. Economic emission dispatch with constraints is a nonlinear optimization problem. For the solution of such nonlinear economic emission load dispatch problems, this work considers a new particle swarm optimization technique. The proposed new PSO gives the best solution for economic emission load dispatch and handles the constraints. For the testing of the proposed new PSO algorithm, this work considered a case study of a system of six generating units, and it was tested for load demands of 700 MW, 800 MW, and 1000 MW. The results of the new PSO for the three load demands considered give the minimum generation cost, minimum emission, and minimum total cost compared to other optimization algorithms. The proposed techniques are effective, and they can help obtain the minimum generation cost and minimize emissions.

Thermal power plants use coal as a fuel to create electricity while wasting a significant amount of energy as heat. If the heat and power plants are combined and used in cogeneration systems, it is possible to reuse the waste heat and hence enhance the overall efficiency of the power plant. In order to minimize production costs while taking system constraints into account, it is important to find out the optimal operating point of power and heat for each unit. Combined heat and power production is now widely used to improve thermal efficiency, lower environmental emissions, and reduce power generation costs. In order to determine the best solutions to the combined heat and power economic dispatch problem, several traditional as well as innovative heuristic optimization approaches were employed. This study offers a thorough analysis of the use of heuristic optimization techniques for the solution of the combined heat and power economic dispatch problem. In this proposed work, the most well-known heuristic optimization methods are examined and used for the solution of various generating unit systems, such as 4, 7, 11, 24, 48, 84, and 96, taking into account various constraints. This study analyzes how various evolutionary approaches are performed for various test systems. The heuristic methodologies’ best outcomes for various case studies with restrictions are contrasted.

Industries have many rotational operations that are used for design, transport, lift, drilling, rolling, robotics, and many other applications. These rotating applications require a proper controller for accurate control of the operation. Separately excited DC motors (SEDCMs) are versatile and have various industrial operations because of their specific speed control characteristics. So, for smooth and accurate operation of an SEDC motor, controllers should be used. PI and PID controllers are used in many cases, but they are ineffective for nonlinear load operation. A fuzzy controller is a heuristic controller and can provide automatic control of the operation. Its operation depends on the selection of the correct membership values. This work proposes a novel particle swarm optimization (PSO) technique that would provide the optimum value of the membership for fuzzy controllers for optimum control of the industrial processes. To obtain SEDC results, MATLAB simulation was performed, and the fuzzy controller with novel PSO was implemented. A fuzzy PSO controller used for motor speed control operation obtains a rise time of 0.00026 s, settling time of 0.000214 s, maximum overshoot of zero, and delay time of 0.016 s, which are the best values when compared to PID and PID-Fuzzy controllers. It is observed that the results obtained from the separately excited DC motor using a fuzzy PSO controller improve the dynamic behavior of the motor that so it smoothly tracks the required speed without any more overshoot or oscillation than the PID controller. Such dynamic, stable operation of the motor makes it perfect for industrial as well as household operations.