Tanveer Ul Haq

Dr. Tanveer Ul Haq

Department of Applied Engineering, Reykjavík University, Reykjavík, Iceland

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2019 in Sensors
Verified
Journal Article
Open access
PDF file
XZXingyun Zhang
Xingyun Zhang
Cunjun RuanCunjun Ruan
Cunjun Ruan
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
KCKanglong Chen
Kanglong Chen
This paper describes a low-cost, small size, and high-sensitivity microwave sensor using a Complementary Circular Spiral Resonator (CCSR), which operates at around 2.4 GHz, for identifying liquid samples and determining their dielectric constants. The proposed sensor was fabricated and tested to effectively identify different liquids commonly used in daily life and determine the concentrations of various ethanol–water mixtures at by measuring the resonant frequency of the CCSR. Using acrylic paint, a square channel was drawn at the most sensitive position of the microwave sensor to ensure accuracy of the experiment. To estimate the dielectric constants of the liquids under test, an approximate model was established using a High-Frequency Simulator Structure (HFSS). The results obtained agree very well with the existing data. Two parabolic equations were calculated and fitted to identify unknown liquids and determine the concentrations of ethanol–water mixtures. Thus, our microwave sensor provides a method with high sensitivity and low consumption of material for liquid monitoring and determination, which proves the feasibility and broad prospect of this low-cost system in industrial application.

23 April 2021 in IEEE Access
Verified
Journal Article
Open access
Ammar ArmghanAmmar Armghan
Ammar Armghan
TATurki M. Alanazi
Turki M. Alanazi
ahsan altafahsan altaf
ahsan altaf
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
In this work, a compact, inexpensive, and efficient dual band microwave sensor is proposed. The sensor is based on two Complementary Symmetric Split-Ring Resonators (CSSRRs) and possesses a high Q factor and wide sensing range. These CSSRRs are coupled electrically with two inductive patches to the Microstrip Transmission Line (MTL). This combination provides two dual bands, first at 5.35 GHz with a notch depth of -55.20 dB and second at 7.99 GHz with a notch depth of -22.54 dB. The sensor works in transmission mode and senses shift in frequency. Some commonly available dielectric substrates with relative permittivity ranges between 1 and 12 are considered Material Under Test (MUT), and detailed sensitivity analysis is being performed for each band. The dual band sensor is fabricated on a low-cost, widely available FR4 substrate and measured by CEYEAR AV3672D vector network analyzer. Additionally, the least square curve fitting method is used to develop a mathematical model for the measured results. An excellent agreement is observed between simulated, measured, and formulated results.

25 August 2019 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
SUShahid Ullah
Shahid Ullah
Cunjun RuanCunjun Ruan
Cunjun Ruan
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
XZXingyun Zhang
Xingyun Zhang
In this work, a high-performance THz microstrip patch antenna is designed using defected ground structure and photonic band-gap. The operating frequency of the proposed antenna is 0.690 THz. DGS and PBG are used to enhance gain, directivity, return loss and VSWR of the antenna. The proposed antenna is simulated in two different design software’s (CST2015, HFSS2018). First, a rectangular microstrip patch antenna is designed, at 0.696 THz, than RSRR structures are used in the substrate as a PBG. Next, the same RSRR structures are used in the ground known as DGS which enhances the VSWR and return loss of the antenna. The last step decreases the size of the substrate to enhance the value of VSWR up to 1.0015 which is close to unity and return loss, gain and directivity are −64.16 dBi, 6.793 dBi, and 6.914 dBi respectively. The bandwidth of the antenna is 26.7 GHz.

26 May 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
Slawomir KozielSlawomir Koziel
Slawomir Koziel
Design optimization of multivariable resonators is a challenging topic in the area of microwave sensors for industrial applications. This article proposes a novel methodology for rapid redesign and parameter tuning of complementary split-ring resonators (CSRRs). Our approach involves inverse surrogate models established using preoptimized resonator data as well as analytical correction techniques to enable rapid adjustment of geometry parameters and CSRR optimization over broad ranges of operating frequencies. The tuning process is arranged to precisely allocate the operating frequency while maximizing the quality factor of the circuit. The procedure is generic and characterized by an extremely low computational cost of up to two electromagnetic (EM) analyses of the circuit at hand (not counting the inverse model setup). The presented technique is demonstrated using a circular CSRR coupled to a microstrip transmission line (MTL) and optimized to operate between 5 and 20 GHz. The design optimized for 15 GHz is fabricated and experimentally validated using a vector network analyzer. The sensor works in the transmission mode and senses the shift in resonance frequency determined by the properties of the material under test (MUT). Furthermore, an inverse regression model is developed that allows for directly finding the unknown permittivity of the MUT based on the measured resonant frequencies of the sensor. The obtained results corroborate the design utility of the proposed optimization method, as well as the practical usefulness of the specific CSRR structure developed with the aid thereof.

7 May 2019 in Sensors
Verified
Journal Article
Open access
PDF file
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
Cunjun RuanCunjun Ruan
Cunjun Ruan
XZXingyun Zhang
Xingyun Zhang
SUShahid Ullah
Shahid Ullah
In this paper, complementary metamaterial sensor is designed for nondestructive evaluation of dielectric substrates. The design concept is based on electromagnetic stored energy in the complementary circular spiral resonator (CCSR), which is concentrated in small volume near the host substrate at resonance. This energy can be employed to detect various electromagnetic properties of materials under test (MUT). Effective electric permittivity and magnetic permeability of the proposed sensor is extracted from scattering parameters. Sensitivity analysis is performed by varying the permittivity of MUT. After sensitivity analysis, a sensor is fabricated using standard PCB fabrication technique, and resonance frequency of the sensor due to interaction with different MUT is measured using vector network analyzer (AV3672series). The transcendental equation is derived for the fabricated sensor to calculate relative permittivity for unknown MUTs. This method is very simple and requires calculating only the resonant frequency, which reduces the cost and computation time.

30 March 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Tanveer Ul HaqTanveer Ul Haq
Tanveer Ul Haq
Cunjun RuanCunjun Ruan
Cunjun Ruan
XZXingyun Zhang
Xingyun Zhang
SUShahid Ullah
Shahid Ullah
AFAyesha Kosar Fahad
Ayesha Kosar Fahad
HWHe Wenlong
He Wenlong
In this paper, an extremely sensitive microwave sensor is designed based on a complementary symmetric S shaped resonator (CSSSR) to evaluate dielectric characteristics of low-permittivity material. CSSSR is an artificial structure with strong and enhanced electromagnetic fields, which provides high sensitivity and a new degree of freedom in sensing. Electromagnetic simulation elucidates the effect of real relative permittivity, real relative permeability, dielectric and magnetic loss tangents of the material under test (MUT) on the resonance frequency and notch depth of the sensor. Experiments are performed at room temperature using low-permittivity materials to verify the concept. The proposed design provides differential sensitivity between 102% to 95% as the relative permittivity of MUT varies from 2.1 to 3. The percentage error between simulated and measured results is less than 0.5%. The transcendental equation has been established by measuring the change in the resonance frequency of the fabricated sensor due to interaction with the MUT.