In this paper, complementary metamaterial sensor is designed for nondestructive evaluation of dielectric substrates. The design concept is based on electromagnetic stored energy in the complementary circular spiral resonator (CCSR), which is concentrated in small volume near the host substrate at resonance. This energy can be employed to detect various electromagnetic properties of materials under test (MUT). Effective electric permittivity and magnetic permeability of the proposed sensor is extracted from scattering parameters. Sensitivity analysis is performed by varying the permittivity of MUT. After sensitivity analysis, a sensor is fabricated using standard PCB fabrication technique, and resonance frequency of the sensor due to interaction with different MUT is measured using vector network analyzer (AV3672series). The transcendental equation is derived for the fabricated sensor to calculate relative permittivity for unknown MUTs. This method is very simple and requires calculating only the resonant frequency, which reduces the cost and computation time.

In this paper, an extremely sensitive microwave sensor is designed based on a complementary symmetric S shaped resonator (CSSSR) to evaluate dielectric characteristics of low-permittivity material. CSSSR is an artificial structure with strong and enhanced electromagnetic fields, which provides high sensitivity and a new degree of freedom in sensing. Electromagnetic simulation elucidates the effect of real relative permittivity, real relative permeability, dielectric and magnetic loss tangents of the material under test (MUT) on the resonance frequency and notch depth of the sensor. Experiments are performed at room temperature using low-permittivity materials to verify the concept. The proposed design provides differential sensitivity between 102% to 95% as the relative permittivity of MUT varies from 2.1 to 3. The percentage error between simulated and measured results is less than 0.5%. The transcendental equation has been established by measuring the change in the resonance frequency of the fabricated sensor due to interaction with the MUT.

The paper presents a highly efficient, low cost, ultra-wideband, microstrip monopole antenna for microwave imaging and wireless communications applications. A new structure (z-shape, ultra-wideband (UWB) monopole) is designed, which consists of stepped meander lines to achieve super-wide bandwidth and high efficiency. Three steps are used to design the proposed structure for the purpose to achieve high efficiency and wide bandwidth. The antenna bandwidth is enhanced by varying the length of meander line slots, optimization of the feeding line and with the miniaturization of the ground width. The simulated and measured frequency bands are 2.7–22.5 GHz and 2.8–22.7 GHz (156% fractional bandwidth), respectively. The dimensions of the antenna are 38 mm × 35 mm × 1.57 mm, and its corresponding electrical size is 2.41 λg × 2.22 λg × 0.09 λg, where guided wavelength λg is at the center frequency (12.75 GHz). This antenna achieved a high bandwidth ratio (8.33:1). The realized gain is varying from 1.6–6.4 dBi, while that of efficiency is 70% to 93% for the whole band. Radiation patterns are measured at four operating frequencies. It has an acceptable group delay, fidelity factor, and phase variation results that satisfy the limit of ultra-wideband in the form of the time domain.

Satellite communication systems require dual-band circularly polarized (CP) waves to integrate receiving and transmit antennas into one dual-band terminal. Polarization converters play an important role in such a scenario to convert the incoming linearly polarized (LP) signal into the transmitted CP signal. Wide-band and wide-angle performance for the transmission based dual-band polarization converters has been a challenge. In this paper, a transmission-based linear polarization to circular polarization (LP-to-CP) converter is presented using a very simple and thin metasurface based structure. The proposed metasheet is uni-layered, patterned with a circular diagonal split ring enclosed in the square ring. The idea for dual-band polarization conversion is verified with an example in which x(y) polarization is converted into LHCP(RHCP) in Ku-band (15.25~18.9 GHz), and RHCP(LHCP) in Ka-band (29.7~36.7GHz). The converter performs polarization conversion for both bands over 21% of bandwidth which is very wide. Moreover, it maintains performance over wide-angled oblique incidences. Dual-band performance is analyzed theoretically, numerically, and experimentally. The equivalent circuit model is also presented for the unit cell. This metasheet has simple and low-cost design, wide polarization conversion bandwidths, polarization diversity, and wide-angle performance which are very promising for future communication systems.

Polarization converters play an important role in modern communication systems, but their wide and multiple band operation to facilitate volume and size reduction is quite challenging. In this paper, a triple-band Linear Polarization to Circular Polarization (LP-to-CP) converter is presented using a novel design procedure based on geometric parameters optimization of a metasheet. The proposed converter is ultrathin, wideband, stable over a wide range of incident angles, and polarization diverse. The conductor layer of metasheet is patterned with a square ring and five square-patches diagonally intersecting each other. To validate the proposed method, an LP-to-CP convertor in X-band (7.3~9.6 GHz) and dual Ka-bands (25.4~31.4 GHz, 35.4~42.2 GHz) is presented. The performance is quite stable in wide range of frequencies and against the variation of incident angles from −25° to 25°. After performing model-based theoretical paradigm analysis, and full-wave simulation and optimization, the converter is fabricated and the measurements are performed inside the anechoic chamber. The measured results, close to simulation results, depict the validity and reliability of the proposed design.

This paper presents a new shape (s-shape monopole) of a super wideband antenna using stepped meander lines, a quarter waveguide transformer feeding line, and a defected ground structure (DGS). The antenna will be used for multiple wireless communication applications like WIMAX/WLAN/ISM/UWB, and also for several wireless communication applications. The total dimensions of the proposed antenna are 35 mm × 35 mm × 1.57 mm or 0.36 λo × 0.36 λo × 0.016 λo, which are the corresponding electrical dimensions with free-space wavelength (λo) at the lower operating frequency. The antenna is designed and simulated into two steps: the first (Antenna 1) covers a bandwidth of 18.2 GHz, while the second (Antenna 2, using DGS) covers a super wide bandwidth of 37.82 GHz (3.08–40.9 GHz). The measured fractional bandwidth and bandwidth ratio of the antenna are 174.68% and 13.009:1, respectively, which is operating from 3.09–40.2 GHz. The maximum calculated gain and efficiency are 5.9 dBi and 92.7%, respectively. The time-domain performance is good due to the calculation of the system fidelity factor, group delay, and its linear and constant phase variation.