This paper proposed a new type of stiffened circular ultra-high performance concrete-filled double skin steel tubular (UHPCFDST) column, in which stiffeners were applied to connect both inner and outer steel tubes. It efficiently delayed the local buckling of steel tubes and enhanced the integral of the section. This new type of UHPCFDST can be named multicells ultra-high performance concrete-filled double skin steel tubular (MUHPCFDST) column since the stiffener divided the sandwich space between the two steel tubes into multicells. Both the UHPCFDST and MUHPCFDST stub columns were fabricated and tested under centrally compression loading to investigate the axial mechanical behavior. The parameters considered in this study included specimen size, diameter-to-thickness ratio, the quantity of stiffener, and hollow ratio. Based on the tests, specimens’ column failure mode, axial load-shortening curves, local buckling behavior, compounding strength, strength index, and ductility coefficient were obtained and discussed. Then, the authors proposed a uniaxial stress-strain function of ultra-high performance concrete under compression and established three-dimension finite-element (FE) models with this stress-strain model to simulate the axial behavior of UHPCFDST and MUHPCFDST columns. Compared with the experimental results, the average deviation of the FE analysis in predicting the column bearing capacity and corresponding axial shortening was and , respectively. Finally, parametric studies were carried out, and a calculation method was proposed. The parametric analysis results and predictions from different methods (including the proposed method and methods suggested by existing design codes) were compared. The proposed method and calculating methods provided in AIJ-2008, EC4, and AS/NZS 2327 can reasonably predict the ultimate bearing capacity of both circular UHPCFDST and circular MUHPCFDST columns.
16 March 2023 in Construction and Building Materials
A concrete-filled double skin tube (CFDST) consists of an outer steel tube, an inner steel tube, and the space between them filled with concrete. Existing studies have shown that the buckling of steel tubes can be significant in noncircular CFDST for nonuniform confinement or a large width-thickness ratio. Stiffening of the steel tubes is necessary to fully utilize the strength and improve the load-carrying capacity of CFDST. Against this background, the author proposed a novel stiffened hexagonal CFDST column with steel strips welded on both the inner tube and outer tube to form several closed cavities. This paper presents an experimental study on the axial compressive behavior of this new type of CFDST column. The experimental program consisted of five stiffened hexagonal CFDST specimens and two reference specimens for comparison, and the test variables were the hollow ratio and rib width. The test results showed that the ultimate bearing capacity and ductility of the CFDST specimens were greatly enhanced by the steel strips and ribs. Moreover, the finite-element (FE) method was used to develop a three-dimensional model of the CFDST column subjected to axial loading and validated against the experiment. The average error of the FE analysis when predicting the column bearing capacity was 0.029 compared with experimental results. Based on the FE model, a parametric study was conducted to analyze further the effect of each parameter on the axial behavior. Furthermore, a strength design formula was developed to estimate the compressive strength of the novel hexagonal CFDST column.