16 March 2023 in Construction and Building Materials
1 November 2021 in Construction and Building Materials
1 January 2021 in Advances in Civil Engineering
Aiming to evaluate the applicability of Fiber Bragg Grating (FBG) strain sensors for semirigid pavement monitoring, beam and cylinder specimens with three types of FBG strain sensors embedded in two kinds of classic semirigid pavement materials, asphalt mixture (AC‐25) and cement‐stabilized crushed stones (CSCS), were prepared in the laboratory. Four‐point bending tests and uniaxial‐compression tests were carried out under different loading frequencies and temperatures to evaluate the working properties of these sensors and then obtain the corresponding real sensitivity coefficients (SCs). The experimental results showed that the synchronism, repeatability, and linearity of all these sensors were prominent. However, the real SC results were significantly different from the recommended and dependent on many factors including temperature, the loading frequencies, the stress state, and the type of embedded material to different degrees. The SCs remained stable when the moduli of the embedded materials were high enough; otherwise, the SCs varied. Two SC prediction models that used the modulus of the embedded material as the only independent variable were developed to deal with the problem of instability. The modulus difference level between the sensors and the embedded material could integrate the factors roughly, except for the stress state. It is recommended that the factors above should be considered when using FBG strain sensors in practice, and it is still necessary to perform laboratory calibration in advance.
19 February 2017 in DEStech Transactions on Engineering and Technology Research
It is a consensus that salt heaving and frost heaving are typical distresses in the sulfate saline soil subgrade. To further investigate the mechanic response of pavement structure in sulfate saline soil area, a finite element(FE) model was established based on fluid-structure interaction(FSI) model in this paper. Then the mechanic response of the asphalt pavement under traffic loads, salt heaving and frost heaving was simulated and analyzed. It is shown that only under salt heaving and frost heaving, the tensile strength of asphalt surface course was seriously inadequate and that at the bottom of semi-rigid base course were negative, which may be helpful to crack resistance at the bottom of base courses. Besides, traffic loads could help to dramatically counteract displacement, tensile stress and strain. However, as a whole, in sulfate saline soil area, asphalt courses should strengthen crack resistance and foundation treatment.