Metal–organic frameworks (MOF) are a class of porous materials with various functions based on their host-guest chemistry. Their selectivity, diffusion kinetics, and catalytic activity are influenced by their design and synthetic procedure. The synthesis of different MOFs has been of considerable interest during the past decade thanks to their various applications in the arena of sensors, catalysts, adsorption, and electronic devices. Among the different techniques for the synthesis of MOFs, such as the solvothermal, sonochemical, ionothermal, and mechanochemical processes, microwave-assisted synthesis has clinched a significant place in MOF synthesis. The main assets of microwave-assisted synthesis are the short reaction time, the fast rate of nucleation, and the modified properties of MOFs. The review encompasses the development of the microwave-assisted synthesis of MOFs, their properties, and their applications in various fields.

The storage and transfer of energy require a safe technology to mitigate the global environmental issues resulting from the massive application of fossil fuels. Fuel cells have used hydrogen as a clean and efficient energy source. Nevertheless, the storage and transport of hydrogen have presented longstanding problems. Recently, liquid organic hydrogen carriers (LOHCs) have emerged as a solution to these issues. The hydrogen storage technique in LOHCs is more attractive than those of conventional energy storage systems like liquefaction, compression at high pressure, and methods of adsorption and absorption. The release and acceptance of hydrogen should be reversible by LOHC molecules following favourable reaction kinetics. LOHCs comprise liquid and semi-liquid organic compounds that are hydrogenated to store hydrogen. These hydrogenated molecules are stored and transported and finally dehydrogenated to release the required hydrogen for supplying energy. Hydrogenation and dehydrogenation are conducted catalytically for multiple cycles. This review elaborates on the characteristics of different LOHC molecules, based on their efficacy as energy generators. Additionally, different catalysts used for both hydrogenation and dehydrogenation are discussed.

The depletion of reliable energy sources and the environmental and climatic repercussions of polluting energy sources have become global challenges. Hence, many countries have adopted various renewable energy sources including hydrogen. Hydrogen is a future energy carrier in the global energy system and has the potential to produce zero carbon emissions. For the non-fossil energy sources, hydrogen and electricity are considered the dominant energy carriers for providing end-user services, because they can satisfy most of the consumer requirements. Hence, the development of both hydrogen production and storage is necessary to meet the standards of a “hydrogen economy”. The physical and chemical absorption of hydrogen in solid storage materials is a promising hydrogen storage method because of the high storage and transportation performance. In this paper, physical hydrogen storage materials such as hollow spheres, carbon-based materials, zeolites, and metal–organic frameworks are reviewed. We summarize and discuss the properties, hydrogen storage densities at different temperatures and pressures, and the fabrication and modification methods of these materials. The challenges associated with these physical hydrogen storage materials are also discussed.

Carbon dots (CDs) demonstrate very poor fluorescence quantum yield (QY). In this study, with the help of a hydrothermal method, we combined CDs with nitrogen and phosphorus elements belonging to the VA group (in the periodic table) to form heteroatom co-doped CDs, i.e., nitrogen and phosphorus co-doped carbon dots (NPCDs). These displayed a significant improvement in the QY (up to 84%), which was as much as four times than that of CDs synthesized by the same method. The as-prepared NPCDs could be used as an “off-on” fluorescence detector for the rapid and effective sensing of ferric ions (Fe³⁺) and catecholamine neurotransmitters (CNs) such as dopamine (DA), adrenaline (AD), and noradrenaline (NAD). The fluorescence of NPCDs was “turned off” and the emission wavelength was slightly red-shifted upon increasing the Fe³⁺ concentration. However, when CNs were incorporated, the fluorescence of NPCDs was recovered in a short response time; this indicated that CN concentration could be monitored, relying on enhancing the fluorescence signal of NPCDs. As a result, NPCDs are considered as a potential fluorescent bi-sensor for Fe³⁺ and CN detection. Particularly, in this research, we selected DA as the representative neurotransmitter of the CN group along with Fe³⁺ to study the sensing system based on NPCDs. The results exhibited good linear ranges with a limit of detection (LOD) of 0.2 and 0.1 µM for Fe³⁺ and DA, respectively.

In this study, a fluorescence sensor based on nitrogen and phosphorus co-doped carbon dot/silver nanoparticle (NPCD/AgNP) nanocomposites was developed for metformin hydrochloride (MFH) detection. We first utilized the reducing nature of the NPCDs to prepare AgNPs from Ag⁺ and subsequently prepare NPCD/AgNP nanocomposites. The nanocomposite material was characterized by various methods, including electron microscopic methods (SEM and TEM), spectroscopic methods (UV-Vis, PL, FTIR, and XPS spectroscopy), light scattering (ELS), and XRD. Further, we utilized the enhanced fluorescence of the NPCDs as well as the overlap between the fluorescence emission spectrum of the NPCDs and the absorption spectrum of the AgNPs to use the NPCD/AgNP nanocomposites as an effective inner filter effect (IFE) pair for sensing MFH. The IFE between NPCDs and AgNPs in the nanocomposite material resulted in a significant quenching of the fluorescence intensity of the nanocomposites compared to that of the pure NPCDs. However, the fluorescence was recovered when MFH was introduced into the nanocomposite solution. The fluorescence intensity of the nanocomposites increased linearly as the MFH concentration increased from 2 to 100 µg/L. This detection method showed good sensitivity compared to other methods. It also showed high selectivity and high sensing potential for MFH in human serum and yielded acceptable results.

Glutathione (GSH) is a thiol that plays a significant role in nutrient metabolism, antioxidant defense and the regulation of cellular events. GSH deficiency is related to variety of diseases, so it is useful to develop novel approaches for GSH evaluation and detection. In this study we used nitrogen and phosphorus co-doped carbon dot-gold nanoparticle (NPCD–AuNP) composites to fabricate a simple and selective fluorescence sensor for GSH detection. We employed the reductant potential of the nitrogen and phosphorus co-doped carbon dots (NPCDs) themselves to form AuNPs, and subsequently NPCD–AuNP composites from Au³⁺. The composites were characterized by using a range of spectroscopic and electron microscopic techniques, including electrophoretic light scattering and X-ray diffraction. The overlap of the fluorescence emission spectrum of NPCDs and the absorption spectrum of AuNPs resulted in an effective inner filter effect (IFE) in the composite material, leading to a quenching of the fluorescence intensity. In the presence of GSH, the fluorescence intensity of the composite was recovered, which increased proportionally to increasing the GSH concentration. In addition, our GSH sensing method showed good selectivity and sensing potential in human serum with a limit of detection of 0.1 µM and acceptable results.