In situ g‐C3N4@ZnO nanocomposites (with 0, 1, 3, 5, and 7 wt.% of g‐C3N4 in nanocomposite) were synthesized via a one‐pot hydrothermal method using precursors of urea, zinc nitrate hexahydrate, and hexamethylenetetramine. The g‐C3N4@ZnO nanocomposites were characterized by X‐ray diffraction, scanning electron microscope, diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The photocatalyst activity of g‐C3N4@ZnO nanocomposites was evaluated via methylene blue degradation experiment under visible light irradiation. The g‐C3N4@ZnO nanocomposites showed an enhancement in photocatalytic activity in comparison to pure ZnO which increased with the g‐C3N4 content (1, 3, 5, and 7 wt.%) in nanocomposites. The photocatalytic activity reached the highest efficiency of 96.8% when the content of g‐C3N4 was 7.0 wt.%. Nanocomposite having 7.0 wt.% of g‐C3N4 also showed good recyclability with degradation efficiency higher than 90% even in the 4th use. The improvement of photocatalytic activity could be attributed to the adsorption ability and effective separation of electron‐hole pairs between g‐C3N4 and ZnO. This work implies a simple method to in situ prepare the nanocomposite material of g‐C3N4 and semiconductors oxide for photocatalyst applications with high efficiency and good recyclability.
Monoclinic tungsten oxide (WO3) nanoplates were synthesized via a two-step simple process: acid precipitation at room temperature to prepare WO3.H2O nanoplates and annealing at high temperature (400 and 500 oC) in ambient air to obtain WO3 nanoplates. The effect of annealing temperature on physical properties (morphology, oxygen deficiency, crystallinity, optical properties, and photocatalytic activity) of WO3 nanoplates was studied. At both two studied annealing temperatures, all samples have the stable monoclinic structure and visible light-range optical bandgap, but the morphology and photocatalytic activity of the samples vary significantly with annealing temperature. At higher annealing temperature (500 oC), the sample has both nanoplate and nanograin morphologies with round edges, higher crystallinity, larger optical bandgap (2.71 eV), and lower photocatalytic activity. The sample annealed at 400 oC has nanoplate morphology with sharp edges, lower optical bandgap (2.63 eV), and higher photocatalytic which shows a high potential for photocatalytic application under visible light irradiation. The effect of the annealing temperature on the properties of WO3 nanoplates is assigned to the dehydration, the coalescence, and/or the melting processes at high temperatures. Dehydration causes the formation of oxygen vacancy – oxygen deficiency. The coalescence and/or the melting result in the changing of morphology and the decrease of the oxygen vacancies. These results imply a simple, cost-effective method to prepare highly oxygen-deficient WO3 nanoplates.
Silver nanoparticles were prepared in an ecofriendly manner at room temperature via the stepwise-modified Tollens route using the lemon juice extract and commercial rice vinegar. In this work, the lemon juice extract—a natural-origin chemical—was used as a reducing and stabilizing agent, and commercial rice vinegar was used to create a low acidic environment to control the silver nanoparticle growth via the stepwise method. The average dimension of silver nanoparticles was qualitatively evaluated through the UV-Vis spectra via the Mie theory. The X-ray diffraction and field emission scanning electron spectroscopy were employed to study the purity, the crystal structure, and the morphology of samples, respectively. Due to the weak activity and low purity of ecofriendly chemicals, the reaction and baking times strongly affect the preparation efficiency in obtaining small-size silver nanoparticles (∼40 nm). The highest efficiency was obtained with 24 h reaction time and 48 h baking time. The bimodal distribution of the size of silver nanoparticles was observed by UV-Vis analysis and field emission scanning electron microscopy. The obtained small-size silver nanoparticles (∼40 nm) have a uniform dimension. The quality of the obtained silver nanoparticles was evaluated through the conducting properties of silver paint made from ecosynthesized silver nanoparticles which showed a promising prospect to develop green-synthesized silver paint working at room temperature.
12 February 2024 in Materials Chemistry and Physics
Composites of refluxed carbon nanotubes (CNTs) at different contents and orthorhombic tungsten oxide hydrate (WO 3 ∙H 2 O) were prepared via acid precipitation at room temperature. The CNTs produced a new phase of monoclinic tungsten oxide dihydrate WO 3 ∙2H 2 O, caused the breakage of WO 3 ∙H 2 O nanoplates, and affected the microstrain in the nanocomposites. The CNTs also enhanced the absorbance in the visible range and increased the specific surface area and pore volume but abnormally enlarged the optical bandgap, which was assigned to the emerging monoclinic WO 3 ∙2H 2 O phase. The adsorptivity and photocatalytic activity of the nanocomposites increased remarkably with CNT content. H 2 O 2 strongly enhanced the photocatalytic activity of the pristine and nanocomposite samples, implying the vital role of photogenerated electrons in the photocatalytic process. Among the synthesized samples, the sample with 20 wt.% CNTs showed the highest adsorptivity and photocatalytic efficiency under visible light irradiation. It also exhibited good reusability in methylene blue degradation and applicability in degrading different organic dyes. This study presents a simple method to prepare CNT@WO 3 ∙H 2 O nanocomposites with a large surface area, a high adsorptivity, and a high photocatalytic activity under visible light irradiation.