In situ g‐C3N4@ZnO nanocomposites (with 0, 1, 3, 5, and 7 wt.% of g‐C3N4 in nanocomposite) were synthesized via a one‐pot hydrothermal method using precursors of urea, zinc nitrate hexahydrate, and hexamethylenetetramine. The g‐C3N4@ZnO nanocomposites were characterized by X‐ray diffraction, scanning electron microscope, diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The photocatalyst activity of g‐C3N4@ZnO nanocomposites was evaluated via methylene blue degradation experiment under visible light irradiation. The g‐C3N4@ZnO nanocomposites showed an enhancement in photocatalytic activity in comparison to pure ZnO which increased with the g‐C3N4 content (1, 3, 5, and 7 wt.%) in nanocomposites. The photocatalytic activity reached the highest efficiency of 96.8% when the content of g‐C3N4 was 7.0 wt.%. Nanocomposite having 7.0 wt.% of g‐C3N4 also showed good recyclability with degradation efficiency higher than 90% even in the 4th use. The improvement of photocatalytic activity could be attributed to the adsorption ability and effective separation of electron‐hole pairs between g‐C3N4 and ZnO. This work implies a simple method to in situ prepare the nanocomposite material of g‐C3N4 and semiconductors oxide for photocatalyst applications with high efficiency and good recyclability.
Monoclinic tungsten oxide (WO3) nanoplates were synthesized via a two-step simple process: acid precipitation at room temperature to prepare WO3.H2O nanoplates and annealing at high temperature (400 and 500 oC) in ambient air to obtain WO3 nanoplates. The effect of annealing temperature on physical properties (morphology, oxygen deficiency, crystallinity, optical properties, and photocatalytic activity) of WO3 nanoplates was studied. At both two studied annealing temperatures, all samples have the stable monoclinic structure and visible light-range optical bandgap, but the morphology and photocatalytic activity of the samples vary significantly with annealing temperature. At higher annealing temperature (500 oC), the sample has both nanoplate and nanograin morphologies with round edges, higher crystallinity, larger optical bandgap (2.71 eV), and lower photocatalytic activity. The sample annealed at 400 oC has nanoplate morphology with sharp edges, lower optical bandgap (2.63 eV), and higher photocatalytic which shows a high potential for photocatalytic application under visible light irradiation. The effect of the annealing temperature on the properties of WO3 nanoplates is assigned to the dehydration, the coalescence, and/or the melting processes at high temperatures. Dehydration causes the formation of oxygen vacancy – oxygen deficiency. The coalescence and/or the melting result in the changing of morphology and the decrease of the oxygen vacancies. These results imply a simple, cost-effective method to prepare highly oxygen-deficient WO3 nanoplates.