All-optical controlling provides burgeoning, precise and compact access in photonics and optoelectronics with tunable performance. Through tuning the physical parameters of optical-controlled devices, such as effective index, bandwidth and dispersion, the output characteristics of free-running laser can be manipulated for widespread applications in spectroscopy and laser biology. Among which the flexible optical-thermal tunability of graphene introduces an advantageous avenue for the enhancement of photosensitivity of optical-controlled devices to efficiently regulate laser properties. Here, we fabricate an optical-controllable fiber filter based on a graphene-assisted micro-fiber Bragg grating, whose wavelength can be linearly tuned by controlling pump light, and a tuning step of 3.1 pm is achieved. By cooperating it with a fiber laser operating at a Q-switched mode-locked state, the lasing wavelength is all-optically controlled with a linear tuning sensitivity of 23.5 pm/mW. Considering the optical controlling performances, such a wavelength-tunable fiber laser may find potential applications in all-optical computing, all-optical logic gating and generation of microwave source.
12 October 2023 in International Journal of Hydrogen Energy
The excellent corrosion resistance of stainless steel primarily relies on the formation of a dense passivation film on its surface. Stress corrosion and hydrogen embrittlement are the primary forms of damage to the stainless steel passivation film, leading to film rupture and subsequent corrosion of the stainless steel substrate. The passivation film exhibits semiconducting properties and typically consists of a bilayer structure with a chromium-rich inner layer and an iron-rich outer layer. This study employs molecular dynamics simulations to investigate the interaction energy between hydrogen atoms and pristine stainless steel passivation films (Fe2O3/Cr2O3) as well as those containing three different types of defects and predicts the diffusion processes of hydrogen atoms in passivation films. The results indicate that the strongest interaction energy of -1.4402 eV is observed between hydrogen atoms and the pristine passivation film. However, as defects emerge within the passivation film, the interaction energy decreases, with a minimum energy of -0.1931 eV observed for the film containing chromium vacancies (VCr), representing a nearly one-order-of-magnitude reduction compared to the defect-free case. Furthermore, the diffusion coefficients of hydrogen atoms in the three defective passivation films are calculated as 6.437 × 10-10, 8.249 × 10-10, and 50.892 × 10-10 m2/s, respectively. Notably, the presence of a VCr defect enhances the hydrogen diffusion coefficient by an order of magnitude compared to the pristine film. Anisotropic diffusion paths and properties are elucidated through an analysis of the self-diffusion behavior of hydrogen in different detective passivation films, providing a theoretical basis for the prediction of hydrogen-induced cracking and the development of early warning technologies for passivation film surface failure.
A series of experiments were carried out to study the relationship between polymer and reservoir permeability, as well as the alternating injection pattern for heterogeneous formations. The polymer molecular size (MS) was studied using dynamic light scattering. The parameters such as hydraulic radius, molecular weight (MW), concentrations and salinity were studied. The injection capacity and the relationship between polymer and formation were obtained using injection experiments with natural cores, which represent different regions in the Daqing oilfield. Moreover, an improved injection pattern, alternating injection in heterogeneous formation was studied based on the injection experiments of parallel and in-layer heterogeneous artificial cores. The alternate cycle and slug size were investigated. It was proven that the alternating injection can improve the efficiency of low permeability layers up to 7.3% and a mean value of 4.27%. It was also found that the mechanism of alternating injection is blocking the high permeability layers and improving the water injection profile. We suggest that other fields with high heterogeneity could try the alternating injection to optimize the polymer flooding. Meanwhile, further pilot tests or numerical simulation of polymer alternating injection in heterogeneous formation (formation type II) should be conducted.