The condition assessment of reinforced concrete (RC) bridge piers after an earthquake using measured responses is important for ensuring the safety of road and railway users. The problem is nonlinear, and the locations and extents of damages are various. However, previous research works focused on linear structural identification or model updating assuming a limited number of nonlinear materials for reasonable estimates. Leveraging the ability of deep learning (DL) for robustly estimating a large number of unknown parameters, this study proposes an ALL nonlinear spring multi‐degree‐of‐freedom (MDOF) damage identification algorithm based on a physics‐informed neural network (PINN). The algorithm is applied to a stacked bilinear rotational spring and damper model of a pier. The number of unknown parameters reaches about 50. The errors of estimated elastic stiffnesses, damping coefficients, and ductility factors (DFs) using simulated responses added with noises are 0.4%, 0.6%, and 3.1%, respectively. Using full‐scale RC bridge pier shaking table experiments, the algorithm revealed the distributions of elastic stiffnesses and DFs along the pier height and their deteriorations. The effects of different types of local damages are quantitatively evaluated and visualized on the distributions.
Tower–girder transverse pounding was observed on the Yokohama Bay Bridge wind tongue during the 2011 Great East Japan Earthquake. Damage to the wind tongue due to pounding can potentially lead to damage of other members. However, pounding was not taken into consideration in the design, and the process of how the damage occurs after the wind tongue damage has not been clarified. Therefore, a way to model the damage process involving tower–girder transverse pounding is needed. In this study, a frame model of the Yokohama Bay Bridge was constructed to reproduce the observed damage that occurred as a result of the pounding. A multiscale model was then constructed by combining the global frame model with a local finite-element model consisting of a shell and solid elements. The model was validated through comparison with actual measurements. Dynamic analysis of the multiscale model clarified the deformation of the wind tongue during large earthquakes and the resulting damage to the bridge. The model demonstrated that ductile damage can occur at the base of the wind tongue during a Level 2 earthquake and that the tower link can then drop off due to its large displacement after the wind tongue damage.
DNN-based inversion of Ground Penetrating Radar (GPR) data is gaining significant attention, primarily using simulated data for training due to the lack of ground truth in real-world scenarios. However, models trained on simulation data often perform poorly on real-world data due to domain discrepancies. This study applies an Unsupervised Domain Adaptation (UDA) method to GPR inversion, introducing a domain classifier within the main inversion DNN. By training the main DNN adversarially against the classifier to learn domain-invariant features, the DNN’s performance can be improved even without labeled data in the target dataset. Several simulation datasets with varying characteristics were generated to compare the performance of three domain classifiers. The experiments revealed that the proposed simple domain classifier structure, using 3×3 convolutional local alignment, outperformed both pointwise local alignment and global alignment classifiers. The proposed method achieved more than 80% improvement in metrics (MAE, SSIM, mIoU) over the non-UDA case, highlighting its effectiveness in addressing domain gaps related to frequency and attenuation. Furthermore, the DNN was trained using unlabeled data from real-world roads measured by on-vehicle GPR, and then applied to a bridge deck slab specimen with known design drawings. From both qualitative and quantitative perspectives, the proposed method demonstrates superior performance in permittivity and material estimation. The method enabled clear detection of rebars, and damage such as deterioration and cracks in the concrete slab. This research is expected provide new insights into the efficient subsurface damage detection of road infrastructures.
This paper presents the implementation of a synchronous Structural Health Monitoring (SHM) framework utilizing wireless, low-cost, and off-the-shelf components. Vibration-based condition monitoring plays a crucial role in assessing the reliability of structural systems by detecting damage through changes in vibration parameters. The adoption of low-cost Micro-Electro-Mechanical Systems (MEMS) sensors in Wireless Sensor Networks (WSNs) has gained traction, emphasizing the need for precise time synchronization to schedule wake-up times of multiple sensor nodes for data collection. To address this challenge, our proposed method introduces a TCP/IP socket programming-based mimic broadcasting mechanism and a scalable sensing network controlled by a central gateway, leveraging the Raspberry Pi Python platform. The system operates using Internet of Things (IoT) concepts and adopts a star topology, where a packet is transmitted from the gateway to initiate measurements simultaneously on multiple sensor nodes. The sensor node comprises a MEMS accelerometer, a real time clock DS3231 module and Raspberry Pi Zero 2W (RPi0-2W), while the gateway employs a Raspberry Pi 4 (RPi4). To ensure accurate time synchronization, all Pi0-2W nodes were configured as Network Time Protocol (NTP) clients, synchronizing with an RPi4 server using chrony, the reliable implementation of the NTP. Through experimental evaluations, the system demonstrates its effectiveness and reliability in achieving initial time synchronization. This study addresses the challenge of achieving precise time alignment between sensor nodes through the utilization of the Dynamic Time Wrapping (DTW) method for Frequency Domain Decomposition (FDD) applications. The contribution of this research significantly enhances the field by improving the accuracy and reliability of time-aligned measurements, with a specific focus on utilizing low-cost sensors. By developing a practical and cost-effective SHM framework, this work advances the accessibility and scalability of structural health monitoring solutions, facilitating more widespread adoption and implementation in various engineering applications