Robotic hands perform several amazing functions similar to the human hands, thereby offering high flexibility in terms of the tasks performed. However, developing integrated hands without additional actuation parts while maintaining important functions such as human-level dexterity and grasping force is challenging. The actuation parts make it difficult to integrate these hands into existing robotic arms, thus limiting their applicability. Based on a linkage-driven mechanism, an integrated linkage-driven dexterous anthropomorphic robotic hand called ILDA hand, which integrates all the components required for actuation and sensing and possesses high dexterity, is developed. It has the following features: 15-degree-of-freedom (20 joints), a fingertip force of 34N, compact size (maximum length: 218 mm) without additional parts, low weight of 1.1 kg, and tactile sensing capabilities. Actual manipulation tasks involving tools used in everyday life are performed with the hand mounted on a commercial robot arm.

To manipulate objects using a robot hand, it is important to measure the information of the various forces on the fingertips. In this letter, a six-axis force/torque (F/T) fingertip sensor for a robot hand is introduced. The sensor was developed to provide the ability to measure six-axis F/T while remaining feasible for robot fingertip integration because of its miniaturization, light weight, and low cost (thanks to its simple manufacturing process). In particular, a novel highly sensitive shear force measurement method is proposed that uses the eccentricity of two cylinders. The designed six-axis F/T sensor was also fabricated. We demonstrate that the developed sensor can be easily installed into the human-sized fingertip of a robot, and we performed an accuracy evaluation using several experiments.

Robotic manipulators require contact force sensing capabilities to sense the contact force between the manipulator and an object. Specifically, for humans and robots to coexist in the work environment, the robot must be able to detect an external force applied by a human. This study presents a new intrinsic force sensing method for robot manipulators that can obtain accurate information of the external force applied by a human during human–robot interaction. The method employs a robot cover, which is typically utilized in robot manipulators. Unlike conventional force sensing methods, a six-axis force/torque sensor is placed between the cover and the link of the robot manipulator. As a result, the proposed method provides information of the three-axis contact force applied to the cover surface and its contact location. Therefore, the cover itself becomes a sensorized cover based on the intrinsic force sensing method. To evaluate its sensing performance, the sensorized cover is experimentally validated using reference sensors. Finally, an experiment is performed in which the robot successfully recognizes letters written on the cover, indicating a high level of contact force sensing performance.

In recent years, human-robot cooperation has enhanced productivity and achieved high payload, speed, and accuracy. Integrating typical industrial robots in human-robot cooperation is challenging because their arms may cause serious injuries to humans during a collision due to malfunction or errors due to robot operators. Therefore, counterbalance robot arms that are capable of counterbalancing the gravitational torques due to the robot mass have been developed to decrease the required capacity of the motors and speeds of these robots. In this research, we propose an advanced counterbalance mechanism using gear units and springs to improve the durability and reliability compared to the previously proposed wire-based counterbalance mechanism, which is difficult to apply to a commercialized product because it can easily be broken or stretched when an excessive force is applied for a long period. Moreover, our proposed method was extended to a multi-DOF system using a parallelogram mechanism based on a timing belt and pulleys to achieve multi-DOF robotic arms. A 2-DOF counterbalanced arm was designed to verify the effectiveness of the proposed mechanism. The simulations and experimental results showed that the proposed mechanism effectively reduced the gravitational torques of each joint of the multi-DOF arm.