γ-Fe2O3 is considered to be a promising catalyst for the selective catalytic reduction (SCR) of nitrogen oxide (NOx). In this study, first-principle calculations based on the density function theory (DFT) were utilized to explore the adsorption mechanism of NH3, NO, and other molecules on γ-Fe2O3, which is identified as a crucial step in the SCR process to eliminate NOx from coal-fired flue gas. The adsorption characteristics of reactants (NH3 and NOx) and products (N2 and H2O) at different active sites of the γ-Fe2O3 (111) surface were investigated. The results show that the NH3 was preferably adsorbed on the octahedral Fe site, with the N atom bonding to the octahedral Fe site. Both octahedral and tetrahedral Fe atoms were likely involved in bonding with the N and O atoms during the NO adsorption. The NO tended to be adsorbed on the tetrahedral Fe site though the combination of the N atom and the Fe site. Meanwhile, the simultaneous bonding of N and O atoms with surface sites made the adsorption more stable than that of single atom bonding. The γ-Fe2O3 (111) surface exhibited a low adsorption energy for N2 and H2O, suggesting that they could be adsorbed onto the surface but were readily desorbed, thus facilitating the SCR reaction. This work is conducive to reveal the reaction mechanism of SCR on γ-Fe2O3 and contributes to the development of low-temperature iron-based SCR catalysts.
29 October 2025 in Journal of Environmental Management
TG-FTIR and PY-GC/MS were used to analyze the pyrolysis behaviors of pine wood, urea-formaldehyde resin (UF resin) and their blended pellets. The pyrolysis process was divided into three stages: water evaporation, devolatilization and pyrolysis residue decomposition. During the pyrolysis process of the blended pellets, with the increase of the addition ratio of UF resin, the peak value of the weight loss decreased in the decomposition stage of the pyrolysis residue, while the temperature shifted to the low-temperature region. This was mainly due to the structural stability of pyrolytic carbon produced by UF resin, which hindered the thermal decomposition of lignin-produced residues in pine. FTIR showed that CO2 was the main product of pyrolysis. For UF resin, nitrogen compounds accounted for a large proportion. With the addition of UF resin, the nitrogen in the blended pellets increased significantly. Since the synergistic effect promoted the further decomposition of the organic oxygen-containing structure, the NO release was still increased. PY-GC/MS showed that co-pyrolysis produced more nitrogen-containing compounds and promoted the decomposition of macromolecular phenol derivatives, lipids and ketones, resulting in more small-molecule acids and alcohols.
LaMnO3 with perovskite structure is a SCR de-NOx catalyst with good performance at low temperatures. In this paper, the SCR reaction process on the 010 surface of LaMnO3 catalyst was studied by DFT method, to guide the development of catalysts and their effective application. The results obtained through research indicate that both E-R and L-H mechanisms exist on the catalyst surface. The NH3 molecule can be absorbed on L acid and then oxidized by lattice oxygen to form NH2. Then, NH2 can react with the NO molecule to form NH2NO and decompose to N2 and H2O. The NH3 can also be absorbed with hydroxyl to form NH4+, it can also react with NO to form NH2NO and then decompose. The NH4+ also can react with NO3− which is formed by NO oxidized when O2 is present, to participate in the rapid SCR process.