Spherical joint is a type of common kinematic pair in spatial parallel mechanism. The existence of spherical joint clearance has many adverse effects on the mechanism. A method of forecasting the dynamic behaviors of spatial parallel mechanism with spherical clearance joint is proposed. The 4-UPS-UPU spatial parallel mechanism with spherical clearance is taken as the research object, the dynamic response, and nonlinear characteristics of the mechanism are studied. The kinematic model and the contact force model of the spherical clearance are established. The dynamic equation of the spatial parallel mechanism with spherical joint clearance is derived by Newton–Euler method. The above-mentioned dynamic equation is solved by using the ODE113 function that is based on a variable order numerical differential algorithm in matlab. The dynamic responses of moving platform with different clearance values are analyzed. The contact force and the center trajectory of the sphere at the spherical joint are obtained. In addition, the phase trajectory, Poincare map, and bifurcation diagram are analyzed, and the nonlinear characteristics of the spherical clearance joint and the moving platform are obtained. By comparing the results, such as the acceleration of moving platform and the contact force, with virtual prototype simulation, the correctness of the dynamic equation of the spatial parallel mechanism with spherical clearance joint and the analysis results are verified. The researches show that the change of clearance value has a great influence on the motion state of spherical clearance joint, and chaos phenomena appears in the clearance joint with the increase in the clearance value. And the impact phenomenon appears between the spherical joint elements, which makes the mechanism generated vibration.
30 September 2021 in Journal of Vibration Engineering & Technologies
Traditional revolute clearance joints assume that the shape of the contact surface of the joint is regular and ignores the effects of wear, which reduces the prediction accuracy of dynamics models. To accurately describe the collision behavior of the motion pair, an Archard formula was applied to construct a wear clearance model. Based on the absolute node coordinate method, multi-body dynamics modeling, wear prediction, and chaotic identification analysis methods for a flexible multi-link mechanism with clearance considering wear effects were proposed. The research results indicate that wear exacerbates the irregularity of the clearance surface contours, leading to increased instability in the dynamic response and the reduced motion accuracy of the mechanism. Compared with clearance size, driving speed has a more significant impact on the chaotic behavior of the system. For high-speed conditions, maintaining the clearance size within approximately 0.1 mm is beneficial for system stability, although this requirement poses challenges for cost control in manufacturing. This study provides a theoretical foundation for wear prediction and stability optimization of high-precision multi-link mechanisms.
24 January 2025 in Journal of Vibration and Control
To mitigate the adverse effects of joint clearances on the dynamic performance of mechanisms, it is essential to investigate the dynamic optimization design of spatial parallel mechanisms with clearances. Currently, there are many studies on the dynamic characteristics of mechanisms with clearances, but there are few studies on dynamic optimization design of mechanisms with clearances, especially on the optimization design of parallel mechanisms with clearances. Therefore, the dynamic optimization design of 3-RRPaR (R stands for revolute joint, Pa stands for quadrilateral structure) parallel mechanism with dry friction clearance of revolute joints is studied. The dynamic model of the parallel mechanism with revolute joint clearance is derived. On these grounds, the dynamic response of the end actuator, the contact collision force at the clearance joint, and their weighted combination are defined as objective functions, respectively. The mass and moment of inertia of the end actuator are taken as optimization variables. A mathematical model for the dynamic optimization design of the parallel mechanism considering dry friction clearances is developed, and the optimal mass and moment of inertia of the end actuator are obtained by G-MSRS method. This study comparatively analyzes the dynamic characteristics of parallel mechanisms with clearances before and after optimization. The results indicate that dynamic optimization significantly enhances the dynamic characteristics of the mechanism. This study lays a theoretical foundation for dynamic optimization design of parallel mechanisms with clearances.
Joint clearances and uncertain parameters of a parallel mechanism will cause the error between the actual dynamic response and the desired dynamic response, leading to a dynamic reliability problem. Currently, the reliability analysis of mechanisms mainly focuses on mechanism with clearances or with uncertain parameters, very few involve considering both clearances and uncertainty parameters simultaneously. The main purpose of this article is to propose a dynamic reliability analysis method of a parallel mechanism with revolute clearance and uncertainty parameters. The dynamic reliability analysis of a parallel mechanism with lubrication revolute clearance joints and uncertain parameters is studied in this paper. The 3-RRPaR spatial parallel mechanism is taken as an example, lubrication revolute clearance joints model is established, and the dynamic model of mechanism with lubrication revolute clearance joints is derived. The dynamic reliability model of mechanism with lubrication revolute clearance joints and uncertain parameters is developed. The effects of various random uncertain parameters on the dynamic reliability of mechanism with lubrication revolute clearance joints are analyzed. This can not only provide a new method for dynamic response reliability analysis of mechanism with lubrication clearances and uncertain parameters, but also lay the foundation for dynamic response and reliability optimization design.