Traditional revolute clearance joints assume that the shape of the contact surface of the joint is regular and ignores the effects of wear, which reduces the prediction accuracy of dynamics models. To accurately describe the collision behavior of the motion pair, an Archard formula was applied to construct a wear clearance model. Based on the absolute node coordinate method, multi-body dynamics modeling, wear prediction, and chaotic identification analysis methods for a flexible multi-link mechanism with clearance considering wear effects were proposed. The research results indicate that wear exacerbates the irregularity of the clearance surface contours, leading to increased instability in the dynamic response and the reduced motion accuracy of the mechanism. Compared with clearance size, driving speed has a more significant impact on the chaotic behavior of the system. For high-speed conditions, maintaining the clearance size within approximately 0.1 mm is beneficial for system stability, although this requirement poses challenges for cost control in manufacturing. This study provides a theoretical foundation for wear prediction and stability optimization of high-precision multi-link mechanisms.
Revolute and prismatic pair clearances are common in various mechanisms, and their motion state seriously affects the accuracy of the mechanism. Adding lubricant to a kinematic pair can effectively counteract the adverse influence of a collision force. Thus, this work introduces an advanced modeling method that considers the combined effects of a lubricated revolute and prismatic clearance, as well as component flexibility, and studies the influence of their coupling effect on the dynamic response and nonlinear characteristic of mechanisms. The specific content of this paper is as follows: Firstly, revolute lubrication clearance and prismatic pair clearance models are established. Secondly, rigid components and flexible components are described based on the reference point coordinate method and absolute nodal coordinate formulation. Then, based on the Lagrange multiplier method, a rigid–flexible coupling dynamics model with revolute lubrication clearance and prismatic clearance is established. Finally, the dynamic responses of the mechanism are analyzed, including the displacement, velocity, and acceleration of the slider, the driving torque of the crank, and the center trajectories of the revolute clearance and prismatic clearance. Qualitative research is conducted on the nonlinear characteristics of the system through a phase diagram and Poincaré map. This quantitative study is conducted on the nonlinear characteristics of a system using the maximum Lyapunov exponent. The influences of different parameters on the dynamic response and nonlinear characteristic of the mechanism are analyzed. The results indicate that lubrication effectively reduces the influence of the clearance on the dynamic response and nonlinear characteristic of the mechanism, resulting in a decrease in the peak dynamic response and a weakening of the chaotic phenomenon. Further, as the driving speed increases, the dynamic viscosity decreases the clearance value increases, and the stability of the mechanism decreases.