A simple and efficient protocol is utilized for the transformation studies of a thiophene analog of E-resveratrol by photocatalytic oxygenation using an anionic and a cationic free-base porphyrin, as well as their manganese(III) complexes. The starting substrate was chosen as a representative of heterostilbenes with proven good antioxidant activity. The experiments were carried out in two photoreactor types (batch and microflow reactor) to investigate the impact of the reactor type and design on conversion and photoproduct composition. NMR spectroscopy and UHPLC/MS analyses were applied for the identification and quantification of four photoproducts (Z-1, 2, 3, and 4), results of isomerization, dimerization, cyclization, and oxygenation. Different yields of photoproducts were obtained in a batch reactor and microflow reactor. In the experiments performed in a microflow reactor, Z-1 was most dominant because it was constantly removed from the reaction mixture. Therefore, the formation of other products (2, 3, 4, and undefined) whose precursor is Z-1 was avoided. This was not the case in the experiments performed in a batch reactor. Additionally, all the reactions tested were significantly accelerated in a microflow reactor, making it the preferred reactor type and design for the photocatalytic transformation of resveratrol derivative.
This study investigates the influence of reaction conditions on the stereoselective Wittig synthesis of a thienostilbene analogue of trans-resveratrol. Reaction conditions were systematically varied across batch experiments and analysed using Spearman correlation, principal component analysis (PCA), and response surface methodology (RSM) to identify key factors (base type and amount, solvent type and volume, system configuration, and reaction time) affecting conversion and the trans/cis ratio. The base type, solvent type, and system configuration had the strongest impact on stereoselectivity, while solvent volume proved effective in enhancing the trans-isomer. PCA revealed that cyclic ether solvents combined with medium-strong bases provide the best balance between conversion and selectivity. RSM predicted optimal conditions in a two-phase NaOH system via phase transfer catalysis (PTC) with increased organic solvent volume, which experimentally increased conversion from 35% to over 92% and raised the trans/cis ratio to 1.81. Transferring the optimized process to continuous flow dramatically reduced reaction time, achieving 67.5% conversion in 15 min while maintaining stereoselectivity. These results demonstrate how statistical optimization combined with flow processing can significantly accelerate the development of stereoselective Wittig reactions.
19 October 2026 in Chemical Engineering Research and Design