Heavy metals are pervasive pollutants found in water, soil, and solid wastes. Bio-solidification offers an environmentally friendly approach to immobilize heavy metal ions using two types of bacteria: urease-producing bacteria (UPB) and phosphatase-producing bacteria (PPB). UPB, exemplified by Sporosarcina pasteurii, secretes urease to hydrolyze urea and generate CO32- ions, while PPB, like Bacillus subtilis, produces alkaline phosphatase to hydrolyze organophosphate monoester (ROP) and produce PO43- ions. These ions react with heavy metal ions, effectively reducing their concentration by forming insoluble carbonate or phosphate precipitates. The success of bio-solidification is influenced by various factors, including substrate concentration, temperature, pH, and bacterial density. Optimal operational conditions can significantly enhance the remediation performance of heavy metals. UPB and PPB hold great potential for remediating heavy metal pollution in diverse contaminated areas such as tailings ponds, electroplating sewage, and garbage incineration plants. In conclusion, harnessing the power of these microbial methods can provide effective solutions for remediating heavy metal-induced pollution across a range of environmental conditions.
Anti-sliding piles are commonly implemented to reinforce landslides. Considering the complex nature of this medium, there is substantial spatial variability in the mechanical parameters of rock and soil masses. However, the influence of spatial variability on the anti-sliding pile remains unclear. In this study, the Erdaogou landslide is taken as a case study in terms of the random response of anti-sliding piles considering spatial variability. Based on comprehensive on-site investigations, various numerical calculations were conducted for the comparative analysis, involving stability analysis and the reliability evaluation of the Erdaogou landslide. The results show that treating mechanical parameters of sliding masses as random variables could result in the probability of overestimating landslide failure, leading to the squandering of supporting materials. Specifically, the coefficient of variation has the greatest influence on failure probability, and the vertical scale of fluctuation showed a larger impact on reliability than that of the horizontal scale of fluctuation. As for the rotation anisotropy, the failure probability fluctuated with the increase in the rotation angle. Taking spatial variability into account, pile top displacements and maximum bending moments tower above those obtained via stability analysis. The related studying methods could provide guidance for the optimal design of anti-sliding piles and the threat control of landslides.
Biocementation mainly relies on the formation of calcium carbonate to bind soil particles. This paper investigates the effectiveness of biocementation in terms of treatment methods. The previously established two-phase methods are compared with newly developed one-phase-low-pH methods on their mechanical behavior and microstructure. The one-phase-low-pH methods present a higher urease fixation rate than two-phase methods, highlighting the cost-effectiveness of this method. A modified one-phase-low-pH using CH3COOH is also compared with HCl-based one-phase-low-pH method. The results show that the morphology and size of precipitated crystals have a great influence on strength development. An optimized treatment method based on the one-phase-low-pH method is also established, which is accomplished via the injection of 5U/ml of bacterial culture together with 2M of cementation solution during each treatment. After four times of treatments, a total of 7 cumulative calcium carbonate content can be obtained with an unconfined compressive strength of 2.15MPa.
12 February 2022 in Advances in Materials Science and Engineering
The stability of rocky slope is determined mainly by discontinuities. The discrete element calculation method can be used to analyze the geometric features of rock structures and to deal with the nonlinear deformation and destruction of the rock mass that may be affected by the discontinuities. In this paper, the Barton–Bandis (B-B) nonlinear strength criterion was introduced to improve the Mohr–Coulomb (M-C) slip model of joint slope. The modified model could reflect the real-time shear strength in a changing stress state. Using the numerical calculation of the shear test of the structural plane, we found that the corrected slip curve fits well with the process before the failure of the shear test. Furthermore, the modified model can track the disintegration between blocks while sliding failure of joint slope. With an increase in the number of structural planes and the complexity of the relative location of blocks, the interaction force between blocks and the sliding failure mode of the joint slope would be more complex. Changing the nonlinear parameters with the stress state of the structure plane could effectively solve this problem.
About Me
PhD, Chongqing University, Industrial Technology Research Institute, Chongqing, 400030, China.
PhD, Chongqing University, Industrial Technology Research Institute, Chongqing, 400030, China.