Due to its potential benefits in data transparency, maintenance, and optimization of operation, the Internet of Things (IoT) has recently emerged in the building automation system (BAS) domain. However, while various IoT devices have been developed, the integration into BAS remains a challenging task due to the variety of conventional interfaces used in existing BAS. From an objective point of view, integrating IoT connectivity on existing devices’ printed circuit boards (PCBs) would be the most efficient option in terms of cost and resources, but requires adaptation of product lines, and vendors would often couple this with their own services and without an option for customization. By contrast, the majority of research activities focus on developing alternative or additional measurement systems, rather than connecting with legacy system components. Furthermore, most research applications cover very simple and individual use-cases with a do-it-yourself character and limited applicability in industrial applications. In this study, we present a scalable, industrial-like embedded solution to connect to common interfaces in BAS applications and share all the hardware and software design as an open-source platform for public use, customization, and further enhancement. Moreover, a thorough measurement performance analysis was conducted, suggesting an acceptable trade-off among accuracy, flexibility, and costs, e.g., achieving a performance increase by over 75% and a cost reduction by roughly 34% compared to a previous design.
Transitioning to fourth and fifth Generation District Heating and Cooling (DHC) systems is vital for urban decarbonization but is impeded by a disconnect between static spatial planning and dynamic physical simulation. This ``modeling gap'' forces engineers into labor-intensive, manual workflows, hindering iterative design. This study introduces a workflow utilizing UESgraphs v2.0.0, a fully automated, open-source Python framework that generates simulation-ready digital twins directly from raw GIS data. The methodology integrates a graph-based topology generator with two simulation engines: Pandapipes for rapid quasi-static thermo-hydraulic simulation and the Modelica AixLib package for high-fidelity dynamic analysis. The workflow is validated on a district from the TransUrban.NRW living lab project in Germany, analyzing the expansion from four to forty-three buildings. Findings indicate the pre-processing effectively adapted the topology from a simple tree to a resilient multi-source ring grid. Comparing both engines revealed a critical trade-off between computational efficiency and transient physical accuracy. The static engine completed the 43-building annual simulation in 13 minutes using under 0.5 GB RAM. Conversely, the dynamic model successfully captured essential thermal inertia and transient behaviors but required over 7.4 hours—a 34-fold increase—and 13 GB RAM for initialization. Consequently, a hierarchical workflow leveraging static tools for rapid topological sizing and dynamic models for transient validation is essential. This open-source approach reduces modeling barriers, ensuring transparent, scalable, and reproducible district energy planning.