The essential feature of DC-DC converter for fuel cell vehicle is to ensure the higher voltage gain to meet out the higher DC link voltage demand, continuous input current to improve the life span of fuel cell, presence of common grounding to avoid electromagnetic interference issue and lower voltage stress with reduced components. This paper presents a high voltage gain DC-DC converter by combining the switched capacitor and quasi switched boost networks modules. The proposed high voltage gain converter provides the continuous input current, lower voltage stress, utilizes fewer number of elements and common grounding feature. The operating characteristics, steady state analysis both in continuous current mode (CCM) and discontinuous current mode (DCM), comparative analysis with contemporary converters are discussed. The theoretical claimed analysis is validated by the simulation and experimental study. The proposed converter is operated for 200 W output power rating and tested for providing the voltage gain in the range of 5-8 times the input voltage gain by varying the input voltage from 25 V-40 V. The efficiency of the proposed converter is also reported for different output power rating which is in the range 91.3%-93.7%.
The electricity spot market is now being implemented in China. Demand response, as a kind of flexible resource, is also being studied and explored for the constructed power market. Among the many demand response applications, the virtual power plant (VPP) as an aggregator of distributed energy resources (DERs), receives ever-increasing attention. However, the participation manner and related impacts of the VPP to the electricity spot market are still unknown within the current power market rules. Under this background, obeying the present trading rules of China’s electricity spot market, a two-stage dispatching model with optimized bidding and operating strategy in the day-ahead (DA) and real-time (RT) market for the VPP is proposed. In the designed model, the conditional risk value (CVaR) is adopted to address the risk encountered by the uncertainty of the electricity spot market price. The impact of the user-side over-deviated revenue mechanism (UORM) of the China spot market on the income of the VPP in the DA and RT market is also analyzed. For a full evaluation, different coefficients for the influence of DA and RT risk, UORM, and energy storage system (ESS) are tested to investigate their respective impacts on the revenue of the VPP. The simulation cases prove that the proposed method is helpful for the VPP to optimize DERs’ output in the electricity spot market according to its own risk preference.
2 June 2016 in IEEE Transactions on Power Electronics
An investigation into the use of single inductor for driving N series-connected LED channels is presented. Each channel has a parallel-connected switch for controlling the LED channel current, as well as charging the inductor. Compared with the conventional structure having all LED channels connected in parallel and (N + 1) switches, the proposed structure has the merits of 1) requiring N switches, 2) allowing all channels to be driven concurrently in every switching cycle, and 3) being insensitive to the duration of the transition switching from one channel to another. Detailed mathematical analysis on the topological operations will be discussed. The proposed concept will be demonstrated on a two-channel structure. A prototype with two 7 W LED modules has been built and evaluated. A control mechanism that can regulate the output luminous flux and correlated color temperature without sensing the inductor current and channel currents will be discussed. Experimental results are favorably compared with theoretical predictions.
16 December 2024 in IEEE Transactions on Power Electronics
An autonomous battery equalization module, which utilizes an energy circulation technique to equalize the voltage across individual battery cells in a series-connected batteries, is presented. Its structure consists of two power conversion stages. The first stage converts the battery string voltage into a high-frequency ac voltage to form a capacitively coupled ac link. The second one contains multiple diode-based rectifiers with their inputs connected to the ac link via coupling capacitors and their outputs connected in series to individual battery cells. Based on the property that the coupling capacitor voltage equals the battery cell voltage, and the rectifier input voltage are shared across the ac link, the magnitude of the current delivered by the second-stage converter is determined by the difference between the coupling capacitor voltage and the ac-link voltage. As the current taken from the first stage is common to all battery cells, charging or discharging of individual battery cells is autonomously adjusted by the output current of the second stage. Apart from equalizing the voltage of the battery cells within a module, the proposed architecture also allows multiple modules connected via the ac link. Individual battery cell can be charged by or discharged to the rest of battery cells in the same module or other modules. Two four-cell modules for equalizing eight 3.6 V, 18 650 batteries have been built and evaluated.
6 February 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Active commutated or naturally clamped techniques have emerged as a new solution to achieve wide range soft-switching and eliminate the necessity of active clamping circuit of current-fed bidirectional DC/DC converter. Multiple typical modulation schemes have been proposed, which include single phase shift (SPS) modulation, dual phase shift (DPS) modulation, and discontinuous current single phase shift (DCSPS) modulation. DCSPS provides the lowest circulating current compared with prior two modulations, but it suffers from the problem of resonance and high peak current at partial loads. This paper proposes a discontinuous current dual phase shift (DCDPS) modulation based on the existing modulations. The duty cycles of the two legs on the high voltage side are controlled to be unsymmetrical to solve the current resonance problem in DCSPS. Extra phase shift is introduced to achieve much lower circulating current at wide range load conditions. Zero current switching (ZCS) of primary switches and zero voltage switching (ZVS) of secondary switches can be achieved over wide input range and wide load range. A 250-W laboratory converter prototype has been built. Experimental results are presented to validate the analysis and design.
19 April 2024 in IEEE Transactions on Industrial Electronics
Conventional battery equalization methods typically have high costs and complex control with a large number of switches. Therefore, a galvanic-isolated equalization charging system for series-connected cells or battery strings to equalize the battery voltage automatically during the charging process is proposed in this article. Based on the rate of change of the current passing through the inductor being directly proportional to the voltage drop across an inductor, the batteries under different initial voltage conditions can be charged to a desired uniform voltage level by supplying different corresponding continuous currents to batteries without the need for any sensor and any control. An experimental prototype for six series-connected battery strings was built to validate the balance performance of the proposed automatic equalization charging system.