Biomass chemical looping gasification (CLG) is a novel gasification technology for hydrogen production, where the oxygen carrier (OC) transfers lattice oxygen to catalytically oxidize fuel into syngas. However, the OC is gradually reduced, showing different reaction activities in the CLG process. Fully understanding the CLG reaction mechanism of fuel molecules on perfect and reduced OC surfaces is necessary, for which the CLG of ethanol using Fe2O3 as the OC was introduced as the probe reaction to perform density functional theory calculations to reveal the decomposition mechanism of ethanol into the synthesis gas (including H2, CH4, ethylene, formaldehyde, acetaldehyde, and CO) on perfect and reduced Fe2O3(001) surfaces. When Fe2O3(001) is reduced to FeO0.375(001), the calculated barrier energy decreases and then increases again, suggesting that the reduction state around FeO(001) favors the catalytic decomposition of ethanol to produce hydrogen, which proves that the degree of reduction has an important effect on the CLG reaction.
Iron-based particles loaded on porous carbon materials have attracted extensive attention as catalysts for denitration and desulfurization reactions. However, the carbon support of a high-temperature denitration catalyst is inevitably oxidized in the presence of H2O and O2. The mechanism of denitration catalyst oxidation and its influence on the catalytic reaction remain to be further explored. Fe2O3-loaded graphene models with carbon vacancy (Gdef), hydroxyl (HyG), and carboxyl (CyG) were constructed to investigate the effects of hydroxylation and carboxylation on the catalytic activity of Fe2O3/graphene for oxidative desulfurization and denitration by using density functional theory (DFT) calculations. According to the analysis of structural properties and adsorption energy, the adsorption process of Fe2O3 on HyG and CyG was observed to have proceeded more favorably than that on Gdef. The density-of-states (DOS) results also affirmed that HyG and CyG promote the electron delocalization of Fe2O3 around the Fermi level, enhancing the chemical activity of Fe2O3. Moreover, adsorption energy analysis indicates that hydroxylation and carboxylation enhanced the adsorption of SO2 and H2O2 on Fe2O3/graphene while also maintaining preferable adsorption stability of NO. Furthermore, mechanistic research explains that adsorbed H2O2 on HyG and CyG directly oxidizes NO and SO2 into HNO2 and H2SO4 following a one-step reaction. The results provide a fundamental understanding of the oxidized catalyst on catalytic denitration and desulfurization reactions.
Biomass combined heat and power (CHP) generation is the more efficient use of biomass compared the direct combustion power generation. The techno-economic analysis of 30 MW biomass direct combustion power set’s modification for heat supply is investigated in this work. Three schemes are employed to provide the district heating supply, including low vacuum condenser, steam extraction, and turbine bypass. The low vacuum condenser approach is the most promising based on the techno-economic analysis. The calculated outlet pressure of the steam turbine, the power generation capacity, the heating supply and the maximum heating area are 30KPa, 27MW, 143.58GJ/h, and 900,000 m2respectively. The expected annual income of biomass combined heat and power plants amounts up to 7,422,700 RMB.