The recent development and technological improvement in dealing with plasmonic metasurfaces has triggered a series of interesting applications related to sensing challenges. Fluorescence has been one of the most studied tools within such a context. With this in mind, we used some well characterized structures supporting plasmonic resonances to study their influence on the emission efficiency of a fluorophore. An extended optical analysis and a complementary investigation through finite-difference time-domain (FDTD) simulations have been combined to understand the coupling mechanism between the excitation of plasmonic modes and the fluorescence absorption and emission processes. The results provide evidence of the spectral shape dependence of fluorescence on the plasmonic field distribution together with a further relationship connected with the enhancement of its signal. It has made evident that the spectral region characterized by the largest relative enhancement closely corresponds to the strongest signatures of the plasmonic modes, as described by both the optical measurements and the FDTD findings.

Gold nanohole arrays, hybrid metal/dielectric metasurfaces composed of periodically arranged air holes in a thick gold film, exhibit versatile support for both localized and propagating surface plasmons. Leveraging their capabilities, particularly in surface plasmon resonance-oriented applications, demands precise optical tuning. In this study, a customized particle swarm optimization algorithm, implemented in Ansys Lumerical FDTD, was employed to optically tune gold nanohole arrays treated as bidimensional gratings following the Bragg condition. Both square and triangular array dispositions were considered. Convergence and evolution of the particle swarm optimization algorithm were studied, and a mathematical model was developed to interpret its outcomes.

Plasmonic gratings are attracting huge interest in the context of realizing sensors based on surface-enhanced fluorescence. The grating features control the plasmonic modes and consequently have a strong effect on the fluorescence response. Within this framework, we focused on the use of a buffer solution flowing across the grating active surface to mimic a real measurement. The refractive index of the surrounding medium is therefore altered, with a consequent modification of the resonance conditions. The result is a shift in the spectral features of the fluorescence emission accompanied by a reshaping of the fluorescence emission in terms of spectral weight and direction.

Plasmonic arrays are grating-like structures able to couple an incoming electromagnetic field into either localized or propagating surface plasmonic modes. A triangular array of elliptical holes in a gold layer were realized resorting to displacement Talbot lithography. Scanning electron microscopy was used to evaluate the geometrical features and finite time domain simulations were performed to verify the consistency of the design. The optical response was characterized by angle-resolved reflectance and transmittance measurements. The results demonstrate the good quality and uniformity of the array. Furthermore, the study on the dependence of the optical response on both the hexagonal lattice and the elliptical hole-defined symmetry properties was conducted allowing the distinction of their effects on both the localized and propagating plasmonic modes. The results indicate that the localized component of the plasmonic modes is mainly affected by the elliptical shape, while the propagating part is influenced by the hexagonal lattice symmetry.

Plasmonic gratings provide an advantageous platform for fluorescence sensing due to their compatibility with functionalization techniques, imaging detection, and the potential for signal enhancement. Among traditional fluorescence detection methods, microscopes are commonly used tools. The interaction between dye fluorescence processes and the plasmonic modes of the grating strongly depends on the measurement configuration and is influenced by the dispersion and spectral characteristics of the plasmonic modes. In our study, we investigated the angular behavior of the fluorescence emission from ATTO700 dye by varying the collection angle using a standard optical microscope coupled with a spectrometer. Our results show a clear dependence of fluorescence emission in terms of spectral shape on the collection angle that can be attributed to plasmonic mode dispersion.

The selection of an affordable method to fabricate plasmonic metasurfaces needs to guarantee complex control over both tunability and reproducibility of their spectral and morphological properties, making plasmonic metasurfaces suitable for integration into different sensing devices. Displacement Talbot lithography could be a valid solution thanks to the limited fabrication steps required, also providing the highly desired industrial scalability. Fabricated plasmonic metasurfaces are represented by a gold nanohole array on a glass substrate based on a triangular pattern. Scanning electron microscopy measurements have been recorded, showing the consistency of the surface features with the optimized design parameters. Reflectance and transmittance measurements have also been carried out to test the reliability and standardization of the metasurface’s optical response. Furthermore, these plasmonic metasurfaces have also been successfully tested for probing refractive index variations in a microfluidic system, paving the way for their use in sensitive, real-time, label-free, and multiplexing detection of bio-molecular events.