The selection of an affordable method to fabricate plasmonic metasurfaces needs to guarantee complex control over both tunability and reproducibility of their spectral and morphological properties, making plasmonic metasurfaces suitable for integration into different sensing devices. Displacement Talbot lithography could be a valid solution thanks to the limited fabrication steps required, also providing the highly desired industrial scalability. Fabricated plasmonic metasurfaces are represented by a gold nanohole array on a glass substrate based on a triangular pattern. Scanning electron microscopy measurements have been recorded, showing the consistency of the surface features with the optimized design parameters. Reflectance and transmittance measurements have also been carried out to test the reliability and standardization of the metasurface’s optical response. Furthermore, these plasmonic metasurfaces have also been successfully tested for probing refractive index variations in a microfluidic system, paving the way for their use in sensitive, real-time, label-free, and multiplexing detection of bio-molecular events.

Plasmonic nanostructures represent a suitable platform for the detection of biomolecule interactions. Their surface functionalization can be performed through different strategies. Optimal thickness, homogeneity, and hydrophilicity of the functional layer can play a crucial role in defining the sensing capabilities required to perform bioassays. In this framework, a combination of tetraethylorthosilicate (TEOS) and a commercial polymer (MCP) was evaluated to improve these features. In our more recent studies, we focused on plasmon-enhanced fluorescence for the detection of a microbial-derived synthetic oligonucleotide. An effective improvement of the fluorescence signal was detected for the combined TEOS and MCP coating.

Gold nanohole arrays are periodic metasurfaces that are gathering huge interest in biosensing applications. The bi-dimensional grating-like structure defines their plasmonic response, together with the corresponding mode of angular dispersion. These properties can be used to investigate the interaction processes with the fluorescence features of a properly chosen emitting molecule. By employing a custom gold nanohole array alongside a commercial organic dye, we conducted an accurate angle-resolved optical characterization resorting to fluorescence, reflectance, and transmittance spectra. The coupling between the plasmonic modes and the fluorescence features was then identified as a modification of the dye fluorescence signal in terms of both spectral redistribution and enhancement. By carefully analyzing the results, different measurement efficiencies can be identified, depending on the set-up configuration, to be properly engineered for sensitivity maximization in plasmon-enhanced fluorescence-based applications.

Gold nanohole arrays are periodic metastructures gathering huge interest for biosensing applica-tions. The grating-like structure defines their plasmonic mode features and their angular disper-sion can be used to highlight efficiently their interaction with the fluorescence emission of a properly tuned fluorophore. Resorting to a properly tuned/engineered/optimised plasmonic na-nohole array and a commercial organic dye, we performed an accurate resolved angle-resolved optical characterization. The plasmonic fingerprints was consequently identified as a modification of the dye photoluminescence signal in terms of both spectral redistribution and enhancement. Interestingly, by analyzing the results, an advantageous measurement configuration can be iden-tified to better engineer a suitable platform for efficiency maximization in plasmon-enhanced flu-orescence-based applications. Therefore, the coupling mechanism with the plasmonic modes, and nanostructure properties can be carefully co-optimized.