Offshore or drydock inspection performed by trained surveyors is required within the integrity management of an in-service marine structure to ensure safety and fitness for purpose. However, these physical inspection activities can lead to a considerable increase in lifecycle cost and significant downtime, and they can impose hazards for the surveyors. To this end, the use of a structural health monitoring (SHM) system could be an effective resolution. One of the key performance indicators of an SHM system is its ability to predict the structural response of unmonitored locations by using monitored data, i.e., an inverse prediction problem. This is highly relevant in practical engineering, since monitoring can only be performed at limited and discrete locations, and it is likely that structurally critical areas are inaccessible for the installation of sensors. An accurate inverse prediction can be achieved, ideally, via a dense sensor network such that more data can be provided. However, this is usually economically unfeasible due to budget limits. Hence, to improve the monitoring performance of an SHM system, an optimal sensor placement should be developed. This paper introduces a framework for optimising the sensor placement scheme to support SHM. The framework is demonstrated with an illustrative example to optimise the sensor placement of a cantilever steel plate. The inverse prediction problem is addressed by using a radial basis function approach, and the optimisation is carried out by means of an evolutionary algorithm. The results obtained from the demonstration support the proposal.
28 January 2024 in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
This paper presents a critical review of literature on the emerging technology known as digital twin and its application in structural integrity management for marine structures. The review defines digital twin in relation to structural integrity management as a virtual representation of a physical structure that mirrors the same structural conditions in real time. Twinning is a dynamic process that involves reducing the discrepancy between the virtual representation and physical structure, which is achieved with the aid of monitored data. Regarding the state-of-the-art concerning marine structure applications, all require the creation of a finite element model to represent the physical structure. Several practical schemes for physical to virtual interconnection have been proposed, but few researchers have concentrated on virtual to physical feedback. In addition, most works have focused only on assessing the current states of structures. To address this, a digital twin-based monitoring framework is proposed and three key enabling technologies, namely model updating, real-time simulation, and data-driven forecasting are demonstrated using a numerical case study. Such technologies enable structural diagnostics, as well as prognostics, to support decision making such as inspection/maintenance planning. Based on the case study, the opportunities and associated challenges of digital twin are discussed. For instance, to fully exploit the potential of digital twin, challenges related to monitoring systems such as standardisation, enhanced redundancy for long-term application, and monitored data quality assurance need to be addressed. Further, because digital twin can avail a vast amount of data, a dedicated data mining capability should also be incorporated.
An adaptable algorithm is proposed in this study, which can predict the complete load-shortening curve of a stiffened panel subjected to uniaxial longitudinal compression. The algorithm provides an extension to existing empirical formulae initially derived for predicting the ultimate compressive strength of stiffened panels. Based on observations from a series of nonlinear finite element analyses, the compressive load-shortening behaviour of stiffened panels is idealised with a linear pre-collapse response, an arc-shaped nonlinear ultimate collapse region and an asymptotic post-collapse decay. The algorithm allows direct modification of the elastic stiffness, ultimate strain, ultimate strength and post-collapse characteristics of the load shortening curve. This enables the load shortening curve to incorporate characteristics specific to the type of stiffened panel under analysis. The capability of the algorithm is demonstrated through an application with the simplified progressive collapse method to calculate the ultimate ship hull strength of four merchant ships and one naval vessel.