Dominik Sabol

Mr. Dominik Sabol

Department of design and monitoring of technical systems, Technical University of Košice, Košice, Košický, Slovakia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2024 in Machines
Verified
Journal Article
Open access
PDF file
MPMartin Pollák
Martin Pollák
DSDominik Sabol
Dominik Sabol
KGKarol Goryl
Karol Goryl
The integration of precision measurement techniques using depth scanners with PLC control provides new possibilities for increasing the efficiency and quality of measuring 3D printed products. Comprehensive analysis of measurements in combination with advanced algorithms can provide more accurate dimensional characteristics and the prediction of defects. The overall goal of such systems is to assess the accuracy and reliability of products manufactured by 3D printing technology, which will fundamentally affect their increased use in industrial sectors. The article describes the design and implementation of a control system for a servo drive used in the proposed solution of a measuring system with a depth sensor, primarily oriented to the control and precise measurement of manufactured products by 3D printing technology. The entire program plan is implemented through the CCW software ver. 12 (Connected Component Workbench) and micro motion control devices. The connection of the servo drive itself is realized by combinations of the servo drive with the HMI (Human Machine Interface) panel and the servo drive with the PLC controller. It is the PLC controller that is subject to the created program in the CCW software, which can be used to control the direction, position, speed, and acceleration of the servomotor. The result is the design of a measurement scanning system with precise motion control through a connected servo drive intended for industrial applications of object error detection and measurement of dimension accuracy.

1 August 2024 in Polymers
Verified
Journal Article
Open access
PDF file
DSDominik Sabol
Dominik Sabol
Zuzana MurčinkováZuzana Murčinková
Zuzana Murčinková
This article deals with stress wave decay performance, analysing the stress wave propagation generated by an impulsive unit load in a 2D representative unit cell (RUC) of a polymer composite with circular particles representing spherical particles, elliptical particles, and short fibres. The micro-scale numerical simulation uses explicit finite element analysis (FEA). The micro-response to an impulsive unit load creates a stress wave amplitude interacting with the material structure and tends to weaken and absorb energy. The stress wave damping is determined by the decaying amplitudes of Mises stress at the front of the stress wave. The stress wave damping is evaluated for different ratios of tensile modules and material densities of matrix and reinforcing material and other factors, such as percentage and particle size, applied to nine topologies of RUCs, and even the presence of an interfacial region is analysed. Moreover, the article visualises the phases of stress wave decay in various particle distributions, i.e., various topologies. Analysing the different topologies of the same particle volume (area) percentage, the study proved that the composite topology and resulting wave–particle and wave–wave interactions are other sources of material damping. The presence of even a small percentage, 3.5 area%, of reinforcing circular particles in the matrix brings a significant increase in stress wave damping up to about 40–43% (depending on the topology) compared to a homogeneous matrix with stress wave damping of 12.5% under the same conditions. Moreover, the topology with the same volume (area) percentage can increase particle stress wave damping by 15.3%.

24 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
Zuzana MurčinkováZuzana Murčinková
Zuzana Murčinková
JZJozef Zivcak
Jozef Zivcak
DSDominik Sabol
Dominik Sabol
The present study deals with the harmful torsional resonance vibrations of textile rotor bearings, the amplitudes of which are reduced mainly by the use of high-capacity damping materials, characterized by an internal hierarchical structure and macroshape, added into the machine mechanical system. The additional materials are polymer matrix composites reinforced either by carbon nanofibers or carbon chopped microfibers and either aramid or carbon continuous fibers. The macroshape is based on a honeycomb with internal cavities. Torsional vibrations arise in mechanical systems as a result of fluctuations in the low-level pressing load of the flat belt driving the rotor-bearing pin and the changing of kinematic conditions within it, which, in the resonance area, leads to cage slip and unwanted impulsive torsional vibrations. Moreover, this occurs during high-frequency performance at around 2100 Hz, i.e., 126,000 min−1. The condition, before the redesign, was characterized by significantly reduced textile rotor-bearing life due to significant impulse torsional vibrations in the resonance area. The study showed a significant reduction in average and maximum torsional amplitudes in the resonance area by 33% and 43%, respectively. Furthermore, the paper provides visualization of the propagation of a stress wave at the microscale obtained by the explicit finite element method to show the dispersion of the wave and the fibers as one of the sources of high damping.

21 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Zuzana MurčinkováZuzana Murčinková
Zuzana Murčinková
PAPavel Adamčík
Pavel Adamčík
DSDominik Sabol
Dominik Sabol
This paper focuses on high-speed-operation textile machines with the aim of increasing the rotational speed by operating within the resonance region to vibration amplitudes up to 5g. The native design does not allow keeping the vibration amplitude under 5g, which is a safe operation mode, for revolutions more than 120,000 min−1. The innovative modification of the design was made by the incorporation of polymer composite materials with carbon dust, glass hollow microspheres, and silica sand fillers to the rotor-bearing casing; moreover, through the incorporation of a multilayered foam composite structure and particle damper to the pressure plate of the mechanical machine system. By using the approach of supplementing with high-damping composites, the existing native design can be used, thus avoiding the costly production of new components and subassemblies with modified shapes and dimensions. Twelve possible combinations of mentioned modifications were tested, evaluated and compared with the native design made of steel, as standard structure material in mechanical engineering. The average vibration amplitudes were evaluated in the region before the resonance peak and in the range of the resonance peak, i.e., 120,000–135,000 min−1. Significant vibration amplitude reductions in the range from 30 to 70% of the average vibration amplitude were obtained. The vibration amplitude reduction results were evaluated considering the mass through the amplitude reduction efficiency coefficient.

12 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
Zuzana MurčinkováZuzana Murčinková
Zuzana Murčinková
DSDominik Sabol
Dominik Sabol
Petr BaronPetr Baron
Petr Baron
This study investigates the design factors of stress wave barrier zones intended for manufacturing machines under impulse loading, using polymer discontinuously reinforced composites with specified internal microstructures, which effectively suppress stress at the wave front, promote uniform stress distribution, improve impact resistance, and reduce vibrations and noise. Two-dimensional representative unit cells and explicit finite element simulations were used to analyze stress wave propagation under impulse loading. The effects of inclusion shape, orientation, distribution, interlayer, and size of the interface on stress wave scattering and attenuation were examined. In our models, hollow inclusions demonstrated 20.6% higher attenuation compared to solid inclusions, with the hollow fiber inclusion showing the most significant improvement. Inclusion orientation relative to the stress wave direction affected attenuation by 18.5%, while redistribution of inclusions and addition of a compliant interlayer contributed additional increments of 3–11%. These results highlight the critical role of microscale topology in stress barrier zone designing, such that the combined adjustment of inclusion shape, orientation, interlayer presence, and spatial distribution provides an effective strategy to maximize stress wave attenuation.

21 October 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Zuzana MurčinkováZuzana Murčinková
Zuzana Murčinková
DSDominik Sabol
Dominik Sabol
Petr BaronPetr Baron
Petr Baron
This study investigates, at the microscale, how particle geometry, orientation, and the interfacial layer affect stress-wave attenuation in particle-reinforced composites de-signed for dynamically loaded components. Representative unit cells with different particle shapes (circular, elliptical, rectangular, annular, and hollow) were modeled in ABAQUS using the explicit finite element analysis. The simulated impulse loading enabled the observation of stress-wave propagation and scattering within the polymer matrix. The results revealed that the presence of reinforcing particles—particularly their shape and the interfacial layer—has a significant influence on wave attenuation. Hollow particles consistently exhibited higher attenuation compared to solid ones. The hollow rectangular particles being the most effective, improving attenuation by more than 20 %. These findings highlight the critical role of microscale morphology in designing com-posite materials with optimized dynamic properties and provide recommendations for engineering applications requiring efficient vibration amplitude suppression.