Karol Goryl

Mr. Karol Goryl

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2023 in Machines
Verified
Journal Article
Open access
PDF file
MPMartin Pollák
Martin Pollák
KGKarol Goryl
Karol Goryl
ISO 9283 is a significant guiding standard for assessing the performance characteristics of robots. The main objective of the present paper was to verify the repeatability of the Panasonic TM-2000 welding robot at a manufacturing company. The paper describes the workflow of the robot control program in the simulation software RoboDK, which created a complete welding station. The measurement, as well as the simulation, were possible thanks to designing the measuring device, the imaginary ISO cube, the measuring plane, the measuring points, and last but not least, the cycle that determined in which order the points were measured. The analytical part of the paper resulted in a direct measurement of the position repeatability of the welding robot. A total of five points were measured for the X-axis and five points for the Y-axis. Each point was recorded 30 times, with measurements taken in the positive direction of motion. The results were compared with the value given by the manufacturer, and the measured deviations were presented graphically.

5 December 2024 in Machines
Verified
Journal Article
Open access
PDF file
MPMartin Pollák
Martin Pollák
DSDominik Sabol
Dominik Sabol
KGKarol Goryl
Karol Goryl
The integration of precision measurement techniques using depth scanners with PLC control provides new possibilities for increasing the efficiency and quality of measuring 3D printed products. Comprehensive analysis of measurements in combination with advanced algorithms can provide more accurate dimensional characteristics and the prediction of defects. The overall goal of such systems is to assess the accuracy and reliability of products manufactured by 3D printing technology, which will fundamentally affect their increased use in industrial sectors. The article describes the design and implementation of a control system for a servo drive used in the proposed solution of a measuring system with a depth sensor, primarily oriented to the control and precise measurement of manufactured products by 3D printing technology. The entire program plan is implemented through the CCW software ver. 12 (Connected Component Workbench) and micro motion control devices. The connection of the servo drive itself is realized by combinations of the servo drive with the HMI (Human Machine Interface) panel and the servo drive with the PLC controller. It is the PLC controller that is subject to the created program in the CCW software, which can be used to control the direction, position, speed, and acceleration of the servomotor. The result is the design of a measurement scanning system with precise motion control through a connected servo drive intended for industrial applications of object error detection and measurement of dimension accuracy.

11 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
MKMarek Kocisko
Marek Kocisko
LŠLukáš Štafura
Lukáš Štafura
KGKarol Goryl
Karol Goryl
ZMZuzana Mitaľová
Zuzana Mitaľová
This article focuses on evaluating selected roughness parameters on samples created by material extrusion, specifically FFF (Fused Filament Fabrication). The experiment was divided into two separate phases. The first phase of the experiment involved creating a four-level model A from PLA (poly (lactic acid)) material without any additives. The variable parameter was the height of the printed layer, where each level was printed at a different print height. Subsequently, the sandblasting method was applied to the samples using a selected abrasive. The roughness parameters were evaluated using a Mitutoyo Surftest SJ-400 roughness tester. Based on the results of the roughness parameters of model A, model B was prepared, using a constant print height. Each level of model B was made with different metallic additives based on PLA material. The findings demonstrate the effectiveness of mechanical post-processing in achieving the desired surface characteristics of additively manufactured components. The experiment confirms the suitability of sanding and grinding to improve surface quality at different layer heights and for PLA-based materials with metal additives. In addition, grinding and sanding of PLA-based composites filled with metal particles can create a realistic metallic appearance comparable to conventionally manufactured metals.

28 March 2024
Verified
Book Chapter
Closed access
PDF file
KGKarol Goryl
Karol Goryl
MPMartin Pollák
Martin Pollák
MKMarek Kocisko
Marek Kocisko
MKMartin Koroľ
Martin Koroľ