Ultra-precision milling with an aerostatic high-speed spindle and a single-crystal diamond micro-tool is promising for the fabrication of miniaturized complex parts. While tool chatter occurring in milling processes has a substantial effect on the machined surface formation, a fundamental understanding of the tool chatter behavior in ultra-precision milling is essentially required for achieving an ultra-high surface finish. In this paper, through a combination of finite element simulations and experimental validations, the machining mechanisms of the ultra-precision diamond micro-milling of a copper workpiece are revealed, in which the tool chatter behavior and its correlation with the machined surface morphology are emphatically studied. Specifically, the correlation between the tool chatter and the transient depth of cut is analytical established. Subsequently, we first establish a finite element model of diamond micro-milling with the consideration of milling tool deformation and material removal to reveal the tool chatter behavior during the milling process. Furthermore, a corresponding micro-milling experiment is also conducted to validate the simulation results in terms of the milling force, chip profile and morphology of machined surfaces. Finally, the effect of spindle speed on the milling process in particular tool chatter is investigated by FE simulations, through which a linear relationship between the spindle speed and microscopic roughness Rz of a machined surface is obtained. The research findings provide a theoretical basis for understanding the origination of tool chatter in the diamond micro-milling process, as well as the rational selection of machining parameters for suppressing the tool chatter.

While ensuring thermal safety is critically required in the operation of the composite energetic material, the cutting temperature is a crucial parameter that must be investigated and controlled in its cutting process to avoid thermal explosion. In this paper, we elucidate the mechanisms of heat generation and conduction during the cutting process of a composite energetic material by establishing a microstructure-based finite element (FE) simulation model considering thermal effects. Specifically, we simulated the cutting process of the composite energetic material by FE simulations, with a focus on the variations in the cutting force, the initiation and conduction of the cutting temperature, and the correlation of the damage behavior of the composite energetic material. Subsequently, we conducted a parametric investigation of the effect of cutting speed on the damage behavior and cutting response of the composite energetic material. This paper provides valuable insights for the exploration of the cutting processes of composite energetic materials.