Poly-ε-caprolactone (PCL) is a biodegradable aliphatic polyester that can be used in the field of biomaterials. Electrospinning is the name given to the process of producing micro and nanoscale fibers using electrostatically charged polymeric solutions under certain conditions. Almost all synthetic and naturally occurring polymers can undergo electrospinning using suitable solvents or mixtures prepared in certain proportions. In this study, silica aerogels were obtained by the sol-gel method. PCL-silica aerogel fibers were synthesized by adding 0.5, 1, 2, and 4% ratios in the PCL solution. Blood contact analysis was performed on the produced fibers with UV-VIS. According to the results obtained, 0.5, 1, 2, and 4% nano-silver were added to the fiber-containing 4% aerogel. Then, SEM-EDS and FTIR analyses were performed on all fibers produced. Antimicrobial tests were performed on fibers containing nano-silver. As a result, high-performance blood coagulation fibers were developed using PCL with aerogel, and an antimicrobial effect was achieved with nano-silver particles. It is thought that the designed surface will be preferred in wound dressing and biomaterial in tissue engineering, as it provides a high amount of cell adhesion with a small amount of blood and contains antimicrobial properties.
31 August 2020 in Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi B - Teorik Bilimler
Tr en Nanoteknoloji, maddenin atomik, moleküler ve supramoleküler seviyelerini kontrol edebilir. Bir partikülün boyutu nano boyutuna indikçe malzemeler elektronik, optik, termal, manyetik ve fotokataliz özellikleri açısından iyi özellikler gösterir. Nano kompozit elyaf, naylon ya da polyester tipi elyaf oluşturucu polimerler ile ikinci faz inorganik malzemenin ince dağılmış pullarından oluşur. Göze çarpan özelliklere göre elektrospinleme yöntemiyle elde edilen nano elyaf esaslı malzemeler, genel filtrasyon, kompozitler, ilaç uygulama alanları nedeniyle artmıştır. Bu araştırmada, polikaprolakton (PCL) ve titanyum dioksit (TiO2) kullanarak% 0.50 1,2 ve 4 oranında nano kompozitler ürettik. Titanyum dioksit nano liflerinin analizinde Enerji Dağıtıcı X-Işını Spektroskopisi (EDS) ve Taramalı Elektron Mikroskobu (SEM) kullanılmıştır. Nanotechnology can control the atomic, molecular, and supramolecular levels of matter. As the size of a particle goes down to nano-size, materials exhibits good characteristics in terms of electronics, optic, thermal, magnetic and fotocatalysis properties. The nano composite fibers comprise of finely dispersed flakes of the second phase inorganic material with nylon or polyester type fiber forming polymers. Nano-fiber based materials obtained by the method of electrospining in the interest of the outstanding features has increased due to the common application areas of filtration, composites, medicine. In this research, we produced nano composites at 0.50 1, 2, and 4 % ratio using polycaprolactone (PCL) and titanium dioxide (TiO2). Energy Dispersive X-Ray Spectroscopy (EDS) and Scanning Electron Microscopy (SEM) were used to analyze titanium dioxide nano fibers.