Poly-ε-caprolactone (PCL) is a biodegradable aliphatic polyester that can be used in the field of biomaterials. Electrospinning is the name given to the process of producing micro and nanoscale fibers using electrostatically charged polymeric solutions under certain conditions. Almost all synthetic and naturally occurring polymers can undergo electrospinning using suitable solvents or mixtures prepared in certain proportions. In this study, silica aerogels were obtained by the sol-gel method. PCL-silica aerogel fibers were synthesized by adding 0.5, 1, 2, and 4% ratios in the PCL solution. Blood contact analysis was performed on the produced fibers with UV-VIS. According to the results obtained, 0.5, 1, 2, and 4% nano-silver were added to the fiber-containing 4% aerogel. Then, SEM-EDS and FTIR analyses were performed on all fibers produced. Antimicrobial tests were performed on fibers containing nano-silver. As a result, high-performance blood coagulation fibers were developed using PCL with aerogel, and an antimicrobial effect was achieved with nano-silver particles. It is thought that the designed surface will be preferred in wound dressing and biomaterial in tissue engineering, as it provides a high amount of cell adhesion with a small amount of blood and contains antimicrobial properties.
The aim of this project is to fabricate fiber mats and hydrogel materials that constitute the two main components of a wound dressing material. The contributions of boric acid (BA) and zinc oxide (ZnO) to the physical and mechanical properties of polycaprolactone (PCL) is investigated. These materials are chosen for their antimicrobial and antifungal effects. Additionally, since chitosan forms brittle hydrogels, it is reinforced with polyvinyl alcohol (PVA) to improve ductility and water uptake properties. For these purposes, PCL, BA, ZnO, PVA, and chitosan are used in different ratios to fabricate nanofiber mats and hydrogels. Mechanical, physical, and chemical characteristics are examined. The highest elastic modulus and tensile strength are obtained from samples with 6% BA and 10% ZnO concentrations. ZnO-decorated fibers exhibit a higher elastic modulus than those with BA, though BA-containing fibers exhibit greater elongation before breakage. All fibers exhibit hydrophobic properties, which help to prevent biofilm formation. In compression tests, CS12 demonstrates the highest strength. Increasing the PVA content enhances ductility, while a higher concentration of chitosan results in a denser structure. This outcome is confirmed by FTIR and swelling tests. These findings highlight the optimal combinations of nanofibrous mats and hydrogels, offering guidance for future wound dressing designs that balance mechanical strength, water absorption, and antimicrobial properties. By stacking these nanofibrous mats and hydrogels in different orders, it is expected to achieve a wound care material that is suitable for various applications. The authors encourage experimentation with different configurations of these nanofiber and hydrogel stackings to observe their mechanical behavior under real-life conditions in future studies.
The field of nanotechnology has seen rapid advancements over the last decade. Nanofiber production through the method of electrospinning is one of the attraction points in this area. The nanofibers, prepared with nano-sized additives, particularly with polymer, have an extensive range of usages. This study utilizes silica aerogels obtained by the sol-gel method due to their low density of 700-800 gr/m2. Polycaprolactone (PCL)-Silica Aerogel Nanofibers were attained by adding 0.5%,1%, 2%and 4% of previously produced aerogels to the nanofibers formed by electrospinning. This paper correspondingly examined the differences between AC-CL and MET-CL solvent groups being utilized during the preparation of the solutions. In addition to this examination, series of material tests were conducted, such as tensile test, SEM, FTIR, DTA/TG, and BET. Overall, the resultant nanofibers with a property of high surface area can be utilized in the design of materials applied to many areas, including solar devices, solar pools, sensors, and capacitors.
1 December 2021 in Journal of Magnetism and Magnetic Materials
Şirketler tedarikçi seçimini gerçekleştirirken genel olarak satın alma ve rekabet stratejilerine uygun olarak belirlenmiş kritere dikkat etmektedirler. Fakat bu seçimi yaparken birçok zorlukla karşılaşıldığı, bu sebeple dikkat edilmesi gereken pek çok hususun bulunduğu bilinmektedir. Piyasada çok sayıda tedarikçi bulunmakta ve bu tedarikçiler içinden şirkete en uygun olanın seçilmesi amaçlanmaktadır. Tedarikçi seçim problemlerinin çözümünde genellikle Çok Kriterli Karar Verme (ÇKKV) yöntemleri uygulanmaktadır. Bahis konusu çalışmada, Avrupa Yeşil Mutabakatı kapsamında oluşturulan Sınırda Karbon Düzenleme Mekanizması’na tabi olan demir-çelik sektöründe faaliyet gösteren bir şirket için tedarikçi seçim problemi ele alınmıştır. Üç tedarikçinin performans değerlendirmesi yapılarak söz konusu tedarikçiler 6 ana, 23 alt kriterde incelenmiştir. Çalışmada, Küresel Bulanık Analitik Hiyerarşi Prosesi, TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) ve CODAS (Communication Disorders, Audiology and Swallowing) yöntemlerini içeren bir karar verme yaklaşımı yer almaktadır. Tedarikçilerin değerlendirilmesi sürecinde uzmanlar tarafından belirlenen kriterlerin ağırlıklarını hesaplamak için Küresel Bulanık AHP yöntemi, alternatifleri sıralayarak ve firma için en uygun tedarikçinin belirlenmesi için Küresel Bulanık TOPSIS ve CODAS yöntemleri kullanılmıştır.
28 June 2022 in İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi
A study about long-term corrosion behavior of anodized and non-anodized Ti6Al4V and MgAZ31B biomaterials was conducted under controlled conditions. By applying 20V DC potential, MgAZ31B alloys was anodized in phosphoric acid and potassium hydroxide while Ti6Al4V alloys was anodized in phosphoric acid and oxalic acid. Long-term experiments were carried out by immersing them in deionized (DI) water, 3% NaCl and phosphate-buffered saline (PBS) solutions. The corrosion rate and pattern were measured by electrochemical analysis. Also, as a result of anodization, the natural oxide layer was observed on the material surface, thus the corrosion rate is reduced and the life of the biomaterial has been improved.