Tao Chen

Dr. Tao Chen


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
JHJie Huang
Jie Huang
TCTao Chen
Tao Chen
DHDaqing Huang
Daqing Huang
TXTengzhou Xu
Tengzhou Xu
The heating and impact of arc and droplet acting on the weld pool lead to the transfer of mass, heat, and momentum, which affects the dynamic behavior of the weld pool and the microstructure in the P-GMAW process. In this paper, an image processing program is used to extract the dynamic behavior characteristics of the droplet transition and the weld pool in high-speed photography. The influence of the current waveform on the arc pressure and the impact of the droplet is quantitatively analyzed with different parameters. The dynamic behavior of the weld pool and the microstructure under different current waveform conditions are further studied. The internal relation of current waveform parameters to weld pool behavior and weld microstructure was expounded. The results show that the droplet impact is positively correlated with the pulse peak current. The rectangular wave pulse has a more significant droplet impact than the exponential wave with the same waveform parameters. The impact of droplet transition on the weld pool enhances the convective intensity of the weld pool. It slows down the cooling rate of the solidified weld microstructure below the tail of the weld pool, increasing the grain size of the weld microstructure.

24 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TXTengzhou Xu
Tengzhou Xu
JHJie Huang
Jie Huang
YLYang LI
Yang LI
TCTao Chen
Tao Chen
Ceramic wool was prepared by the melt-spinning method, and the diameter was the main factor severely affecting the performance of the final product which was difficult to check online. The current study discusses the approximate simulation of the fiber formation and presents a fast precision measuring method to predict the ceramic wool diameter using an improved Back-Propagation (BP) neural network. Particle Swarm Optimizer (PSO) was employed to optimize the neural network structure for its presentation of the relationship between the motor frequency of the spinning wheel and the ceramic wool diameter. The superiority of this method was demonstrated by experiment compared with the least square method (LSM). The mean measurement error of PSO-BP was 0.471%, which was lower than that of LSM. The presented PSO-BP method was very valuable for predicting the wool diameter, and the neural networks could solve nonlinear problems successfully, which was certified by the actual prediction of ceramic wool diameter.

25 May 2024 in Sensors
Verified
Journal Article
Open access
PDF file
CLCuihong Liu
Cuihong Liu
TXTengzhou Xu
Tengzhou Xu
TCTao Chen
Tao Chen
SSShi Su
Shi Su
JHJie Huang
Jie Huang
YLYijin Li
Yijin Li
The continuous scanning laser Doppler vibrometry (CSLDV) technique is usually used to evaluate the vibration operational deflection shapes (ODSs) of structures with continuous surfaces. In this paper, an extended CSLDV is demonstrated to measure the non-continuous surface of the bladed disk and to obtain the ODS efficiently. For a bladed disk, the blades are uniformly distributed on a given disk. Although the ODS of each blade can be derived from its response data along the scanning path with CSLDV, the relative vibration direction between different blades cannot be determined from those data. Therefore, it is difficult to reconstruct the complete vibration mode of the whole blade disk. In order to measure the complete ODS of the bladed disk, a method based on ODS frequency response functions (ODS FRFs) has been proposed. While the ODS of each blade is measured by designing the suitable scanning paths in CSLDV, an additional response signal is obtained at a fixed point as the reference signal to identify the relative vibration phase between the blade and the blade of the bladed disk. Finally, a measurement is performed with a simple bladed disk and the results demonstrate the feasibility and effectiveness of the proposed extended CSLDV method.

18 April 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JHJie Huang
Jie Huang
DHDaqing Huang
Daqing Huang
TCTao Chen
Tao Chen
HLHongda Li
Hongda Li
The study of the aerodynamics of a flight vehicle under Martian air conditions is experimentally difficult due to its characteristics such as low air density and temperature, making the vehicle operate at an ultra-low Reynolds number, which in turn introduces a complex flow field. In this paper, to find a proper computational fluid dynamics (CFD) method with which to better understand the aerodynamics of rotor-type aircraft under Martian air conditions, the aerodynamic performance of a rotor with rectangular blades under ultra-low density Martian air conditions is studied. A simulation scheme using a large eddy simulation solver and sliding meshing technology is established, and the method is verified based on experimental results from a Mars Air Simulator (MAS). In addition, the influence of the test bench and chamber is investigated through flow field analysis. The results show that the established method can predict lift in a very accurate manner, but that the torque prediction is not so promising. The study also determines that the fixture and the chamber wall of an MAS has little influence on the prediction of aerodynamic performance due to the quickly decreasing of flow speed and dissipation of vortexes. The test bench has about 5% influence on lift prediction, possibly due to the ground effect of the bench. In addition, simulation under actual Martian air conditions shows that the results agree well with the MAS experiment’s results, indicating that the temperature difference has little influence on the lift performance, and therefore that the MAS is a good tool for the lift prediction of Martian helicopters.

19 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
GXGaochang Xie
Gaochang Xie
TXTengzhou Xu
Tengzhou Xu
TCTao Chen
Tao Chen
WXWei Xu
Wei Xu
Adapting to extremely harsh service environments is an unavoidable challenge for microwave absorption materials. In this paper, C/PyC/SiC composites were prepared by a vacuum impregnation, curing and cracking process with various preparation cycles, and the stress–strain curves were further discussed. The results show that after three cycles, the C/PyC/SiC composite showed significantly enhanced mechanical properties of 83.59 MPa at around 35.00% strain, and it also possessed the best overall electromagnetic microwave absorption performance, with a minimum reflection loss value of −46.04 dB at 16.06 GHz and 1.90 mm of thickness. All in all, we have introduced an innovative method for fabricating electromagnetic microwave-absorbing materials capable of withstanding harsh environmental conditions.

29 January 2026 in Crystals
Verified
Journal Article
Open access
PDF file
TCTao Chen
Tao Chen
TXTengzhou Xu
Tengzhou Xu
JLJingyi Luo
Jingyi Luo
PHPeng He
Peng He
The long-term interfacial reliability of Cu/Al brazed joints is critical for power equipment but is often compromised by severe intermetallic compound (IMC) degradation during thermal aging. This study investigates the evolution mechanism and mechanical stability of Cu/Al joints brazed with 0.5 wt.% Ga-modified Zn-15Al filler metal, aged at 200 °C for up to 1000 h. Microstructural evolution, diffusion kinetics, and mechanical properties were systematically characterized using SEM, EDS, nanoindentation, and shear testing. Results indicate that the unmodified control interface degrades via Zn-diffusion-driven “in situ Cu depletion” of the Cu9Al4 layer, leading to severe embrittlement. In contrast, the addition of Ga induces a “sacrificial reconstruction” mechanism, where the outer CuAl2 layer transforms into a dense lamellar ternary structure via cellular decomposition. This reconstructed layer acts as an effective diffusion barrier and “Zn sink,” trapping infiltrating atoms and preserving the structural integrity of the underlying Cu9Al4 phase. Consequently, the Ga-modified joints demonstrate superior shear strength retention and an optimized H/E ratio throughout the aging process, shifting the failure mode from brittle cleavage to a toughened lamellar peeling mechanism. This work elucidates how Ga-modulated phase reconstruction fundamentally enhances interfacial stability, offering a theoretical basis for high-reliability interconnects.