Based on the microstructural evolution in Mn-based maraging steels aged at 460–540 °C, the formation mechanism of reverted austenite is proposed. Reverted austenite formed at grain boundaries at the onset of aging. During further aging, the accumulated Mn enrichment at newly formed \( \alpha^{{\prime }} /\gamma \) interfaces led to thin austenite layers growing into lath-like austenite grains. The lateral growth of lath-like reverted austenite was sluggish, reflecting the low diffusivity of Mn. We show that reverted austenite formed by a shear-dominated mechanism assisted by a small amount of Mn diffusion, whereas the nucleation of reverted austenite within martensite laths was kinetically slower.
The precipitates formed in a new series of FeMn maraging steels when aged at 500 °C were identified as the L21-ordered Ni2TiAl phase. The precipitate formed a coherent-coplanar microstructure analogously to γ/γ' Ni-based superalloys and maintained a high number density and homogeneous dispersion within α′-martensite matrix even after aging for 10,080 min. An increase in the Mn content of the alloy led to faster precipitation kinetics and thus rapid hardening kinetics.