Nonlinear Kerr micro-resonators have enabled fundamental breakthroughs in the understanding of dissipative solitons, as well as in their application to optical frequency comb generation. However, the conversion efficiency of the pump power into a soliton frequency comb typically remains below a few percent. We fabricate and characterize a hybrid Mach-Zehnder ring resonator geometry, consisting of a micro-ring resonator embedded in an additional cavity with twice the optical path length of the ring. The resulting interferometric back coupling enables to achieve an unprecedented control of the pump depletion: pump-to-frequency comb conversion efficiencies of up to 55% of the input pump power is experimentally demonstrated with a soliton crystal comb. We assess the robustness of the proposed on-chip geometry by generating a large variety of dissipative Kerr soliton combs, which require a lower amount of pump power to be accessed, when compared with an isolated micro-ring resonator with identical parameters. Micro-resonators with feedback enable accessing new regimes of coherent soliton comb generation, and are well suited for comb applications in astronomy, spectroscopy and telecommunications.

We experimentally demonstrate spatial beam self-cleaning and supercontinuum generation in a tapered Ytterbium-doped multimode optical fiber with parabolic core refractive index profile when 1064 nm pulsed beams propagate from wider (122 µm) into smaller (37 µm) diameter. In the passive mode, increasing the input beam peak power above 20 kW leads to a bell-shaped output beam profile. In the active configuration, gain from the pump laser diode permits to combine beam self-cleaning with supercontinuum generation between 520-2600 nm. By taper cut-back, we observed that the dissipative landscape, i.e., a non-monotonic variation of the average beam power along the MMF, leads to modal transitions of self-cleaned beams along the taper length.

We experimentally study polarization dynamics of Kerr beam self-cleaning in a graded-index multimode optical fiber. We show that spatial beam cleaning is accompanied by nonlinear polarization rotation and a significant increase of the degree of linear polarization.

We study experimentally and numerically the spectral and spatial dynamics of second harmonic generation in an all-optically poled multimode graded-index fiber. In contrast with poled single-mode fibers, in a multimode graded-index fiber a pump can generate a series of sharp sidebands around its second harmonic (SH) that originate from the sub-millimetric periodic evolution of the intensity at the fundamental frequency. The mutual interaction between the fundamental and its SH may also strongly affect the spatial distribution of guided light for both colors: when increasing the pump power, both fundamental and SH output beams evolve from disordered multimode speckles into two bell‐shaped beams.

Planar quasi‐Yagi antennas including a printed balun are designed and experimentally characterised. The parasitic array driver is a folded dipole connected to a parallel stripline. The unbalanced to balanced transition between the input microstrip and the folded dipole terminals is obtained by linearly tapering both the microstrip and the ground plane widths. These printed antennas are more compact and directive than their counterparts based on resonant half‐wavelength dipole drivers: indeed, in the presence of one director, the size of the board is about 0.4 λ ₀ × 0.5 λ ₀ and the measured gain is 7 dB.

Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.