Solution-processed bathocuproine (BCP) has been widely used in fullerene (FA)-based organic solar cells (OSCs) for decades as an electron transport layer (ETL). However, it has not emerged for use in non-fullerene acceptor (NFA)-based OSCs due to the interfacial chemical interaction between the NFA and BCP, leading to poor device performance. Herein, newly synthesized amine-functionalized bathocuproine (BCPN) is successfully applied as an electron transport layer (ETL) in NFA based OSCs (PM6:Y6 and PM6:BTP-ec9) for the first time with a power conversion efficiency (PCE) of 15.5% and 16.7%, respectively. Nonencapsulated OSCs based on PM6:Y6 and PM6:BTP-ec9 built using BCPN demonstrate substantially improved photostability (T80 ∼ 140 and 100 hours, respectively) compared to both control devices built using BCP (T80 ∼ 1 hour) under continuous photoirradiation (AM 1.5 G, 100 mW cm−2). The improvement in photostability is primarily attributed to the prevention of the breakage of the conjugated bond in the NFAs (Y6 and BTP-eC9). This is verified by the observation that the surface morphology of BCPN on the bulk-heterojunction (BHJ) layer is retained, whereas that of BCP on the BHJ layer is completely degraded, leading to an inferior photostability for OSCs. Moreover, we further explored the behaviour of charge extraction property in the NFA based OSCs built using BCPN and BCP as a function of photoirradiation time. It also preserves the charge extraction property in the NFA based OSCs built using BCPN. Thus, our approach demonstrates that the amination of the BCP moiety (BCPN) affords a desirable ETL material for improving the photostability of OSCs based on NFAs without sacrificing the PCE.
Herein, we design and characterize 9-heterocyclic ring non-fullerene acceptors (NFAs) with the extended backbone of indacenodithiophene by cyclopenta [2,1-b:3,4-b’] dithiophene (CPDT). The planar conjugated CPDT donor enhances absorption by reducing vibronic transition and charge transport. Developed NFAs with different end groups shows maximum absorption at approximately 790–850 nm in film. Because of the electronegative nature of the end-group, the corresponding acceptors showed deeper LUMO energy levels and red-shifted ultraviolet absorption. We investigate the crystallinity, film morphology, surface energy, and electronic as well as photovoltaic performance. The organic photovoltaic cells using novel NFAs with the halogen end groups fluorine or chlorine demonstrate better charge collection and faster exciton dissociation than photovoltaic cells using NFAs with methyl or lacking a substituent. Photovoltaic devices constructed from m-Me-ITIC with various end groups deliver power conversion efficiencies of 3.6–11.8%.
Despite the remarkable advancement of organic solar cells (OSCs) with power conversion efficiencies (PCEs) surpassing 20%, the thermal instability at interfacial layers remains a major obstacle to their practical commercialization. In particular, the molybdenum oxide (MoO x ) hole‐transport layer in inverted OSCs (I‐OSCs) is prone to thermally induced degradation, including work function (WF) shallowing and interfacial diffusion. Although several passivation strategies have been explored to mitigate MoO x instability, their effectiveness remains limited, and the development of advanced passivation materials is still lacking. Here, we report a nitrone‐based passivation strategy using N‐tert‐butyl‐α‐phenylnitrone (PBN). The polar nitrone (N + –O − ) moiety facilitates strong interactions with under‐coordinated molybdenum sites, suppressing both WF shifts and diffusion of MoO x . Notably, comprehensive analyses, including OrbiSIMS depth profiling and drift‐diffusion modeling, reveal that MoO x diffusion, rather than WF shallowing, is the dominant degradation pathway. Consequently, PBN‐passivated devices retain ∼100% of their initial PCE (∼18.1%) after 2000 h at 85°C without a rapid initial PCE drop, known as burn‐in loss. The general applicability of this strategy is further confirmed in PM6:L8BO, PM6:Y6, and PM6:BTP‐eC9 BHJ systems, offering a viable pathway for fabricating robust I‐OSCs.